From: giulio.benetti@micronovasrl.com (Giulio Benetti)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
Date: Thu, 19 Apr 2018 15:15:13 +0200 [thread overview]
Message-ID: <3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com> (raw)
In-Reply-To: <CAGb2v65tH_8_J27Xmx4TeEYhpHLJf4m0AzXJoGXZYMfJH=51xQ@mail.gmail.com>
Hi,
Il 19/04/2018 14:45, Chen-Yu Tsai ha scritto:
> On Thu, Apr 19, 2018 at 8:31 PM, Giulio Benetti
> <giulio.benetti@micronovasrl.com> wrote:
>> Hi,
>>
>> Il 19/04/2018 11:32, Chen-Yu Tsai ha scritto:
>>>
>>> This panel is marketed as Banana Pi 7" LCD display. On the back is
>>> a sticker denoting the model name S070WV20-CT16.
>>
>>
>> Judging from the code, the real vendor should be CDTech.
>> Take a look at their website:
>> http://www.cdtech-lcd.com/en/standardscreen.html
>>
>> I point you my patch for inserting another similar panel:
>> https://patchwork.freedesktop.org/patch/211914/
>>
>> Maybe it would make sense to use CDTech as the vendor,
>> because maybe Bananapi resells only it.
>> Or maybe it is a custom panel done for them,
>> but the same is for other panels I've submitted patches.
>> Micronova srl custom, but vendor is CDTech.
>>
>> What do you think?
>
> That might be true. But for people without access to the vendors,
> this is horribly hard to figure out. People are only going to look
> at whatever marking there is on the LCD panel, and whatever the
> seller says. This panel has the model number stickered on, but the
> PCB attached to it only has the Banana Pi logo.
Ah ok, my fault, I didn't see it has a PCB attached with Banana Pi logo.
Also it makes a lot of sense what you say about people looking for display.
>
> And given it's a custom piece, probably OEM or ODM, the real
> manufacturer matters less. You don't mention "Foxconn" as the
> vendor of the iPhone, do you?
:) that's right.
Best regards
--
Giulio Benetti
CTO
MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale ? 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642
>
> ChenYu
>
>>
>> --
>> Giulio Benetti
>> CTO
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale ? 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>>
>>>
>>> This is a 7" 800x480 panel connected through a 24-bit RGB interface.
>>> However the panel only does 262k colors.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>> .../display/panel/bananapi,s070wv20-ct16.txt | 7 ++++++
>>> drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++
>>> 2 files changed, 32 insertions(+)
>>> create mode 100644
>>> Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> new file mode 100644
>>> index 000000000000..2ec35ce36e9a
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
>>> @@ -0,0 +1,7 @@
>>> +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "bananapi,s070wv20-ct16"
>>> +
>>> +This binding is compatible with the simple-panel binding, which is
>>> specified
>>> +in simple-panel.txt in this directory.
>>> diff --git a/drivers/gpu/drm/panel/panel-simple.c
>>> b/drivers/gpu/drm/panel/panel-simple.c
>>> index cbf1ab404ee7..9bc037f74d6c 100644
>>> --- a/drivers/gpu/drm/panel/panel-simple.c
>>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>>> @@ -745,6 +745,28 @@ static const struct panel_desc avic_tm070ddh03 = {
>>> },
>>> };
>>> +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
>>> + .clock = 30000,
>>> + .hdisplay = 800,
>>> + .hsync_start = 800 + 40,
>>> + .hsync_end = 800 + 40 + 48,
>>> + .htotal = 800 + 40 + 48 + 40,
>>> + .vdisplay = 480,
>>> + .vsync_start = 480 + 13,
>>> + .vsync_end = 480 + 13 + 3,
>>> + .vtotal = 480 + 13 + 3 + 29,
>>> +};
>>> +
>>> +static const struct panel_desc bananapi_s070wv20_ct16 = {
>>> + .modes = &bananapi_s070wv20_ct16_mode,
>>> + .num_modes = 1,
>>> + .bpc = 6,
>>> + .size = {
>>> + .width = 154,
>>> + .height = 86,
>>> + },
>>> +};
>>> +
>>> static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
>>> {
>>> .clock = 71900,
>>> @@ -2112,6 +2134,9 @@ static const struct of_device_id platform_of_match[]
>>> = {
>>> }, {
>>> .compatible = "avic,tm070ddh03",
>>> .data = &avic_tm070ddh03,
>>> + }, {
>>> + .compatible = "bananapi,s070wv20-ct16",
>>> + .data = &bananapi_s070wv20_ct16,
>>> }, {
>>> .compatible = "boe,nv101wxmn51",
>>> .data = &boe_nv101wxmn51,
>>>
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2018-04-19 13:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-19 9:32 [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels Chen-Yu Tsai
2018-04-19 9:32 ` [PATCH 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu Chen-Yu Tsai
2018-04-19 9:32 ` [PATCH 2/6] drm/sun4i: tcon: Rename Dithering related register macros Chen-Yu Tsai
2018-04-19 9:32 ` [PATCH 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels Chen-Yu Tsai
2018-04-19 13:31 ` Maxime Ripard
2018-04-19 9:32 ` [PATCH 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel Chen-Yu Tsai
2018-04-19 12:31 ` Giulio Benetti
2018-04-19 12:45 ` Chen-Yu Tsai
2018-04-19 13:15 ` Giulio Benetti [this message]
2018-04-24 16:42 ` Rob Herring
2018-05-14 18:03 ` Jagan Teki
2018-05-16 6:42 ` Chen-Yu Tsai
2018-05-16 7:20 ` Jagan Teki
2018-05-16 7:56 ` Chen-Yu Tsai
2018-04-19 9:32 ` [PATCH 5/6] ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0 Chen-Yu Tsai
2018-04-19 9:32 ` [PATCH 6/6] [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7" 800x480 RGB LCD panel Chen-Yu Tsai
2018-09-05 13:24 ` [PATCH 0/6] drm/sun4i: Support color dithering for LCD panels Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3341fcae-2146-b3b4-be41-b7e5167c2147@micronovasrl.com \
--to=giulio.benetti@micronovasrl.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox