From: b.zolnierkie@samsung.com (Bartlomiej Zolnierkiewicz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/4] ARM: EXYNOS: fix CPU1 hotplug for AFTR mode on Exynos3250
Date: Wed, 18 Mar 2015 14:23:35 +0100 [thread overview]
Message-ID: <3449559.PngGo6WKuq@amdc1032> (raw)
In-Reply-To: <CAJKOXPe3P0mO-WuufAwF_tB6P=kfr-ORyQ6pa2pRnvjytCuHZg@mail.gmail.com>
Hi,
On Wednesday, March 18, 2015 02:10:31 PM Krzysztof Kozlowski wrote:
> 2015-03-18 13:51 GMT+01:00 Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>:
> > CPU1 hotplug may hang when AFTR is used. Fix it by:
> > - setting AUTOWAKEUP_EN bit in ARM_COREx_CONFIGURATION register in
> > exynos_cpu_power_up()
> > - not clearing reserved bits of ARM_COREx_CONFIGURATION register in
> > exynos_cpu_power_down()
> > - waiting while an undocumented register 0x0908 becomes non-zero in
> > exynos_core_restart()
> > - using dsb_sev() instead of IPI in exynos_boot_secondary() on
> > Exynos3250
> >
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> > ---
> > arch/arm/mach-exynos/platsmp.c | 23 ++++++++++++++++++++---
> > arch/arm/mach-exynos/regs-pmu.h | 2 ++
> > 2 files changed, 22 insertions(+), 3 deletions(-)
>
>
> Looks good (except one nit below) and this also fixes hotplug issues
> during resume from S2R:
> $ echo mem > /sys/power/state
> [ 156.517266] Disabling non-boot CPUs ...
> [ 156.517781] IRQ18 no longer affine to CPU1
> [ 156.518043] CPU1: shutdown
> [ 156.544718] Enabling non-boot CPUs ...
> [ 156.554925] CPU1: Software reset
> [ 158.552631] CPU1: failed to come online
> [ 158.552753] Error taking CPU1 up: -5
>
> Reviewed and tested on Rinato (Gear 2/Exynos 3250) board:
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Thank you!
> One comment below...
>
> >
> > diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> > index d2e9f12..ebd135b 100644
> > --- a/arch/arm/mach-exynos/platsmp.c
> > +++ b/arch/arm/mach-exynos/platsmp.c
> > @@ -126,6 +126,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
> > */
> > void exynos_cpu_power_down(int cpu)
> > {
> > + u32 core_conf;
> > +
> > if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
> > /*
> > * Bypass power down for CPU0 during suspend. Check for
> > @@ -137,7 +139,10 @@ void exynos_cpu_power_down(int cpu)
> > if (!(val & S5P_CORE_LOCAL_PWR_EN))
> > return;
> > }
> > - pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > +
> > + core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > + core_conf &= ~S5P_CORE_LOCAL_PWR_EN;
> > + pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > }
> >
> > /**
> > @@ -148,7 +153,12 @@ void exynos_cpu_power_down(int cpu)
> > */
> > void exynos_cpu_power_up(int cpu)
> > {
> > - pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> > + u32 core_conf = S5P_CORE_LOCAL_PWR_EN;
> > +
> > + if (soc_is_exynos3250())
> > + core_conf |= S5P_CORE_AUTOWAKEUP_EN;
> > +
> > + pmu_raw_writel(core_conf,
> > EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> > }
> >
> > @@ -226,6 +236,10 @@ static void exynos_core_restart(u32 core_id)
> > if (!of_machine_is_compatible("samsung,exynos3250"))
> > return;
> >
> > + while (!pmu_raw_readl(S5P_PMU_SPARE2))
> > + udelay(10);
> > + udelay(10);
>
> We really need to start documenting this. Please add short description
> why this SPARE2 check is here and who uses it. Without documenting
> this behavior future generations won't be able to debug this stuff.
> Imagine replacing sboot with uboot by someone...
I've already planned to do this for this code and for coupled cpuidle
use of SPARE2 as well. However I would really prefer to do it in
an incremental patch if there are no other issues with this patchset.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
next prev parent reply other threads:[~2015-03-18 13:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-18 12:51 [PATCH v3 0/4] ARM: EXYNOS: cpuidle: add AFTR mode support for Exynos3250 Bartlomiej Zolnierkiewicz
2015-03-18 12:51 ` [PATCH v3 1/4] ARM: EXYNOS: fix CPU1 hotplug for AFTR mode on Exynos3250 Bartlomiej Zolnierkiewicz
2015-03-18 13:10 ` Krzysztof Kozlowski
2015-03-18 13:23 ` Bartlomiej Zolnierkiewicz [this message]
2015-03-18 13:32 ` Krzysztof Kozlowski
2015-03-18 14:16 ` Bartlomiej Zolnierkiewicz
2015-03-18 12:51 ` [PATCH v3 2/4] ARM: EXYNOS: add code for setting/clearing boot flag Bartlomiej Zolnierkiewicz
2015-03-18 13:33 ` Krzysztof Kozlowski
2015-03-18 14:23 ` Bartlomiej Zolnierkiewicz
2015-03-18 12:51 ` [PATCH v3 3/4] ARM: EXYNOS: cpuidle: add AFTR mode support for Exynos3250 Bartlomiej Zolnierkiewicz
2015-03-18 13:38 ` Krzysztof Kozlowski
2015-03-18 15:03 ` Bartlomiej Zolnierkiewicz
2015-03-18 12:51 ` [PATCH v3 4/4] ARM: EXYNOS: cpuidle: allow driver usage on Exynos3250 SoC Bartlomiej Zolnierkiewicz
2015-03-18 13:39 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3449559.PngGo6WKuq@amdc1032 \
--to=b.zolnierkie@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).