Re: [PATCH v1 4/8] PCI: brcmstb: Use swinit reset if available

[Stanimir Varbanov <svarbanov@suse.de>]

On 6/28/24 23:54, Jim Quinlan wrote:
> The 7712 SOC adds a software init reset device for the PCIe HW.
> If found in the DT node, use it.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 4104c3668fdb..0f1c3e1effb1 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -266,6 +266,7 @@ struct brcm_pcie {
>  	struct reset_control	*rescal;
>  	struct reset_control	*perst_reset;
>  	struct reset_control	*bridge;
> +	struct reset_control	*swinit;
>  	int			num_memc;
>  	u64			memc_size[PCIE_BRCM_MAX_MEMC];
>  	u32			hw_rev;
> @@ -1626,6 +1627,25 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>  		dev_err(&pdev->dev, "could not enable clock\n");
>  		return ret;
>  	}
> +
> +	pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> +	if (IS_ERR(pcie->swinit)) {
> +		ret = dev_err_probe(&pdev->dev, PTR_ERR(pcie->swinit),
> +				    "failed to get 'swinit' reset\n");
> +		goto clk_out;
> +	}
> +
> +	ret = reset_control_assert(pcie->swinit);
> +	if (ret) {
> +		dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
> +		goto clk_out;
> +	} else {
> +		ret = dev_err_probe(&pdev->dev, reset_control_deassert(pcie->swinit),
> +				    "could not de-assert reset 'swinit' after asserting\n");
> +		if (ret)
> +			goto clk_out;
> +	}

Could you move reset_control_assert() after get all resources.

~Stan

> +
>  	pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
>  	if (IS_ERR(pcie->rescal)) {
>  		ret = PTR_ERR(pcie->rescal);