[PATCH v5 2/2] mtd: nand: sunxi: add reset line support

[icenowy@aosc.xyz (Icenowy Zheng)]

You're right. This is a copy-n-paste error from the original sunxi-mmc.c file,
which get all the clocks and resets before using them.

20.06.2016, 03:37, "Maxime Ripard" <maxime.ripard@free-electrons.com>:
> On Mon, Jun 20, 2016 at 12:14:35AM +0800, Icenowy Zheng wrote:
>> ?The NAND controller on some sun8i chips needs its reset line to be
>> ?deasserted before they can enter working state.
>>
>> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>> ?---
>> ?Changes in v2:
>> ???- Corrected the error checking code of reset line.
>>
>> ?Changes in v3:
>> ???- Corrected a more serious error brought in the "fix" of v2.
>>
>> ?Changes in v4:
>> ???- Removed unneeded code block after "else".
>>
>> ?Changes in v5:
>> ???- Added reassertion code in case of initialization error and device
>> ?????remove.
>>
>> ??drivers/mtd/nand/sunxi_nand.c | 27 ++++++++++++++++++++++++---
>> ??1 file changed, 24 insertions(+), 3 deletions(-)
>>
>> ?diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
>> ?index a83a690..3b40186 100644
>> ?--- a/drivers/mtd/nand/sunxi_nand.c
>> ?+++ b/drivers/mtd/nand/sunxi_nand.c
>> ?@@ -39,6 +39,7 @@
>> ??#include <linux/gpio.h>
>> ??#include <linux/interrupt.h>
>> ??#include <linux/iopoll.h>
>> ?+#include <linux/reset.h>
>>
>> ??#define NFC_REG_CTL 0x0000
>> ??#define NFC_REG_ST 0x0004
>> ?@@ -269,6 +270,7 @@ struct sunxi_nfc {
>> ??????????void __iomem *regs;
>> ??????????struct clk *ahb_clk;
>> ??????????struct clk *mod_clk;
>> ?+ struct reset_control *reset;
>> ??????????unsigned long assigned_cs;
>> ??????????unsigned long clk_rate;
>> ??????????struct list_head chips;
>> ?@@ -1871,26 +1873,41 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
>> ??????????if (ret)
>> ??????????????????goto out_ahb_clk_unprepare;
>>
>> ?+ nfc->reset = devm_reset_control_get_optional(dev, "ahb");
>> ?+
>> ?+ if (!IS_ERR(nfc->reset)) {
>> ?+ ret = reset_control_deassert(nfc->reset);
>> ?+ if (ret) {
>> ?+ dev_err(dev, "reset err %d\n", ret);
>> ?+ goto out_mod_clk_unprepare;
>> ?+ }
>> ?+ } else if (PTR_ERR(nfc->reset) != -ENOENT) {
>> ?+ return PTR_ERR(nfc->reset);
>
> You're leaking all the resources here. Please use a goto.
>
> Thanks,
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com