From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [patch v3 3/3] arm: omap4: support pmu
Date: Fri, 4 Mar 2011 11:46:07 +0530 [thread overview]
Message-ID: <3734c031c0714f7f6bea072bb8b75a02@mail.gmail.com> (raw)
In-Reply-To: <1299149633-699-4-git-send-email-tom.leiming@gmail.com>
> -----Original Message-----
> From: tom.leiming at gmail.com [mailto:tom.leiming at gmail.com]
> Sent: Thursday, March 03, 2011 4:24 PM
> To: linux at arm.linux.org.uk
> Cc: linux-arm-kernel at lists.infradead.org; will.deacon at arm.com; Ming
> Lei; Santosh Shilimkar; Woodruff Richard; Tony Lindgren; linux-
> omap at vger.kernel.org
> Subject: [patch v3 3/3] arm: omap4: support pmu
>
> From: Ming Lei <tom.leiming@gmail.com>
>
> This patch supports pmu irq routed from CTI, so
> make pmu/perf working on OMAP4.
>
> The idea is from Woodruff Richard in the disscussion
> about "Oprofile on Pandaboard / Omap4" on
> pandaboard at googlegroups.com.
>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Cc: Woodruff Richard <r-woodruff2@ti.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: linux-omap at vger.kernel.org
> Signed-off-by: Ming Lei <tom.leiming@gmail.com>
> ---
Looks good.
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> arch/arm/mach-omap2/devices.c | 82
> +++++++++++++++++++++++++++-
> arch/arm/plat-omap/include/plat/omap44xx.h | 2 +
> 2 files changed, 81 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-
> omap2/devices.c
> index d216976..d97bb5a 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -22,6 +22,7 @@
> #include <asm/mach-types.h>
> #include <asm/mach/map.h>
> #include <asm/pmu.h>
> +#include <asm/cti.h>
>
> #include <plat/tc.h>
> #include <plat/board.h>
> @@ -322,20 +323,95 @@ static struct resource omap3_pmu_resource = {
> .flags = IORESOURCE_IRQ,
> };
>
> +static struct resource omap4_pmu_resource[] = {
> + {
> + .start = OMAP44XX_IRQ_CTI0,
> + .end = OMAP44XX_IRQ_CTI0,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .start = OMAP44XX_IRQ_CTI1,
> + .end = OMAP44XX_IRQ_CTI1,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> static struct platform_device omap_pmu_device = {
> .name = "arm-pmu",
> .id = ARM_PMU_DEVICE_CPU,
> .num_resources = 1,
> };
>
> +static struct arm_pmu_platdata omap4_pmu_data;
> +static struct cti omap4_cti[2];
> +
> +static void omap4_enable_cti(int irq)
> +{
> + if (irq == OMAP44XX_IRQ_CTI0)
> + cti_enable(&omap4_cti[0]);
> + else if (irq == OMAP44XX_IRQ_CTI1)
> + cti_enable(&omap4_cti[1]);
> +}
> +
> +static void omap4_disable_cti(int irq)
> +{
> + if (irq == OMAP44XX_IRQ_CTI0)
> + cti_disable(&omap4_cti[0]);
> + else if (irq == OMAP44XX_IRQ_CTI1)
> + cti_disable(&omap4_cti[1]);
> +}
> +
> +static irqreturn_t omap4_pmu_handler(int irq, void *dev,
> irq_handler_t handler)
> +{
> + if (irq == OMAP44XX_IRQ_CTI0)
> + cti_irq_ack(&omap4_cti[0]);
> + else if (irq == OMAP44XX_IRQ_CTI1)
> + cti_irq_ack(&omap4_cti[1]);
> +
> + return handler(irq, dev);
> +}
> +
> +static void omap4_configure_pmu_irq(void)
> +{
> + void __iomem *base0;
> + void __iomem *base1;
> +
> + base0 = ioremap(OMAP44XX_CTI0_BASE, SZ_4K);
> + base1 = ioremap(OMAP44XX_CTI1_BASE, SZ_4K);
> + if (!base0 && !base1) {
> + pr_err("ioremap for OMAP4 CTI failed\n");
> + return;
> + }
> +
> + /*configure CTI0 for pmu irq routing*/
> + cti_init(&omap4_cti[0], base0, OMAP44XX_IRQ_CTI0, 6);
> + cti_unlock(&omap4_cti[0]);
> + cti_map_trigger(&omap4_cti[0], 1, 6, 2);
> +
> + /*configure CTI1 for pmu irq routing*/
> + cti_init(&omap4_cti[1], base1, OMAP44XX_IRQ_CTI1, 6);
> + cti_unlock(&omap4_cti[1]);
> + cti_map_trigger(&omap4_cti[1], 1, 6, 2);
> +
> + omap4_pmu_data.handle_irq = omap4_pmu_handler;
> + omap4_pmu_data.enable_irq = omap4_enable_cti;
> + omap4_pmu_data.disable_irq = omap4_disable_cti;
> +}
> +
> static void omap_init_pmu(void)
> {
> - if (cpu_is_omap24xx())
> + if (cpu_is_omap24xx()) {
> omap_pmu_device.resource = &omap2_pmu_resource;
> - else if (cpu_is_omap34xx())
> + } else if (cpu_is_omap34xx()) {
> omap_pmu_device.resource = &omap3_pmu_resource;
> - else
> + } else if (cpu_is_omap44xx()) {
> + omap_pmu_device.resource = omap4_pmu_resource;
> + omap_pmu_device.num_resources = 2;
> + omap_pmu_device.dev.platform_data = &omap4_pmu_data;
> + omap4_configure_pmu_irq();
> + } else {
> return;
> + }
>
> platform_device_register(&omap_pmu_device);
> }
> diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h
> b/arch/arm/plat-omap/include/plat/omap44xx.h
> index ea2b8a6..b127a16 100644
> --- a/arch/arm/plat-omap/include/plat/omap44xx.h
> +++ b/arch/arm/plat-omap/include/plat/omap44xx.h
> @@ -57,5 +57,7 @@
> #define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
> #define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
>
> +#define OMAP44XX_CTI0_BASE 0x54148000
> +#define OMAP44XX_CTI1_BASE 0x54149000
> #endif /* __ASM_ARCH_OMAP44XX_H */
>
> --
> 1.7.3
next prev parent reply other threads:[~2011-03-04 6:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-03 10:53 [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4 tom.leiming at gmail.com
2011-03-03 10:53 ` [patch v3 1/3] arm: introduce cross trigger interface helpers tom.leiming at gmail.com
2011-03-07 9:48 ` Jean Pihet
2011-03-07 9:50 ` Jean Pihet
2011-03-07 10:20 ` Ming Lei
2011-03-07 12:04 ` Santosh Shilimkar
2011-03-03 10:53 ` [patch v3 2/3] arm: pmu: allow platform specific irq enable/disable handling tom.leiming at gmail.com
2011-03-07 9:51 ` Jean Pihet
2011-03-07 9:52 ` Jean Pihet
2011-03-03 10:53 ` [patch v3 3/3] arm: omap4: support pmu tom.leiming at gmail.com
2011-03-03 18:20 ` Tony Lindgren
2011-03-04 6:16 ` Santosh Shilimkar [this message]
2011-03-07 9:54 ` Jean Pihet
2011-03-07 9:49 ` [patch v3 0/3] arm: pmu: support pmu/perf on OMAP4 Jean Pihet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3734c031c0714f7f6bea072bb8b75a02@mail.gmail.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).