From: florian@openwrt.org (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] arm: mvebu: add DTS file for Marvell RD-A370-A1 board
Date: Wed, 09 Jan 2013 20:56:07 +0100 [thread overview]
Message-ID: <3816648.2TVsTiMOWx@bender> (raw)
In-Reply-To: <1588881.pi23bvqp7D@bender>
This patch adds the DTS file to support the Marvell RD-A370-A1
(Reference Design board) also known as RD-88F6710 board. It is almost
entirely similar to the DB-A370 board except that the first Ethernet PHY
is SGMII-wired and the second is a switch which is RGMII-wired.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Thomas, Cl?ment, as support for other peripherals gets merged, I will update
this DTS file to reflect this. Thanks!
Changes since v1:
- added missing entry in arch/arm/boot/dts/Makefile to actually build the DTB
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-370-rd.dts | 61 +++++++++++++++++++++++++++++++++++
2 files changed, 62 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-370-rd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b7246d6..7a75171 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
+ armada-370-rd.dtb \
armada-xp-db.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
new file mode 100644
index 0000000..d62dfac
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -0,0 +1,61 @@
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ * Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "armada-370.dtsi"
+
+/ {
+ model = "Marvell Armada 370 Reference Design";
+ compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ serial at d0012000 {
+ clock-frequency = <200000000>;
+ status = "okay";
+ };
+ sata at d00a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ };
+
+ ethernet at d0070000 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "sgmii";
+ };
+ ethernet at d0074000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+ };
+};
--
1.7.10.4
next prev parent reply other threads:[~2013-01-09 19:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-09 19:48 [PATCH] arm: mvebu: add DTS file for Marvell RD-A370-A1 board Florian Fainelli
2013-01-09 19:56 ` Florian Fainelli [this message]
2013-01-10 9:38 ` [PATCH v2] " Gregory CLEMENT
2013-01-10 12:51 ` Gregory CLEMENT
2013-01-10 12:57 ` Florian Fainelli
2013-01-11 14:45 ` Florian Fainelli
2013-01-11 14:53 ` Gregory CLEMENT
2013-01-11 14:56 ` Jason Cooper
2013-01-13 19:40 ` Florian Fainelli
2013-01-13 20:12 ` Jason Cooper
2013-01-14 9:36 ` Florian Fainelli
2013-01-14 14:47 ` [PATCH v3] " Florian Fainelli
2013-01-23 14:29 ` Jason Cooper
2013-01-23 14:40 ` Jason Cooper
2013-01-31 17:57 ` Jason Cooper
2013-01-31 19:28 ` Florian Fainelli
2013-02-01 10:38 ` [PATCH] arm: mvebu: enable the SD card slot on Armada 370 Reference Design board Florian Fainelli
2013-02-16 16:29 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3816648.2TVsTiMOWx@bender \
--to=florian@openwrt.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).