linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: rockchip: set correct stabilization thresholds in suspend
Date: Wed, 22 Jul 2015 17:27:08 +0200	[thread overview]
Message-ID: <3856665.6DP3Y23l8S@diego> (raw)

Currently the stabilization thresholds for the oscillator and external pmu
are statically set to 30ms based on a 32kHz clock rate. This leaves out the
case when we don't switch to the 32kHz clock if either usb wakeup is
enabled or we only enter the shallow suspend mode where the logic keeps
running.

So, set the correct threshold after we have determined if we switch to the
32kHz clock or stay with the 24MHz one.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-rockchip/pm.c | 16 ++++++++++++----
 arch/arm/mach-rockchip/pm.h |  4 ----
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 892bace..4539f51 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -96,7 +96,8 @@ static bool rk3288_slp_disable_osc(void)
 static void rk3288_slp_mode_set(int level)
 {
 	u32 mode_set, mode_set1;
-	bool osc_switch_to_32k = rk3288_slp_disable_osc();
+	bool osc_switch_to_32k;
+	int cnt_thres;
 
 	regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0);
 	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
@@ -135,6 +136,8 @@ static void rk3288_slp_mode_set(int level)
 	mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP);
 
 	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
+		osc_switch_to_32k = rk3288_slp_disable_osc();
+
 		/* arm off, logic deep sleep */
 		mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) |
 			    BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
@@ -145,7 +148,10 @@ static void rk3288_slp_mode_set(int level)
 
 		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
 			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
+
 	} else {
+		osc_switch_to_32k = false;
+
 		/*
 		 * arm off, logic normal
 		 * if pmu_clk_core_src_gate_en is not set,
@@ -154,6 +160,11 @@ static void rk3288_slp_mode_set(int level)
 		mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
 	}
 
+	/* set correct stabilization threshold */
+	cnt_thres = (osc_switch_to_32k) ? 32 : 24000;
+	regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, cnt_thres * 30);
+	regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, cnt_thres * 30);
+
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1);
 }
@@ -262,9 +273,6 @@ static int rk3288_suspend_init(struct device_node *np)
 	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
 	       rk3288_bootram_sz);
 
-	regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH);
-	regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index b6494c2..8a55ee2 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -62,10 +62,6 @@ static inline void rockchip_suspend_init(void)
 /* PMU_WAKEUP_CFG1 bits */
 #define PMU_ARMINT_WAKEUP_EN		BIT(0)
 
-/* wait 30ms for OSC stable and 30ms for pmic stable */
-#define OSC_STABL_CNT_THRESH	(32 * 30)
-#define PMU_STABL_CNT_THRESH	(32 * 30)
-
 enum rk3288_pwr_mode_con {
 	PMU_PWR_MODE_EN = 0,
 	PMU_CLK_CORE_SRC_GATE_EN,
-- 
2.1.4

             reply	other threads:[~2015-07-22 15:27 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-22 15:27 Heiko Stübner [this message]
2015-07-22 15:28 ` [PATCH 2/2] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend Heiko Stübner
2015-07-23  0:53 ` [PATCH 1/2] ARM: rockchip: set correct stabilization thresholds in suspend Chris Zhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3856665.6DP3Y23l8S@diego \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).