[PATCH 0/3] arm: dts: lpc32xx: update ssp / spi nodes

[arnd@arndb.de (Arnd Bergmann)]

On Thursday 14 April 2016 08:20:34 slemieux.tyco at gmail.com wrote:
> From: Sylvain Lemieux <slemieux@tycoint.com>
> 
> This patchset change the following:
> 1) adds clock properties to spi peripheral devices,
>    clock ids are taken from dt-bindings/clock/lpc32xx-clock.h
> 
> 2) disable, by default, the SSP0/SPI1 and SSP1/SPI2 shared pinout;
>    shared pin should be enable in board specific dts, as needed.
> 
> 3) enable SSP0 used by PHY3250.
> 
> Sylvain Lemieux (3):
>   arm: dts: lpc32xx: add clock properties to spi nodes
>   arm: dts: lpc32xx: disabled ssp0/spi1 & ssp1/spi2 by default
>   arm: dts: phy3250: enable ssp0
> 
>  arch/arm/boot/dts/lpc32xx.dtsi | 16 ++++++++++++++
>  arch/arm/boot/dts/phy3250.dts  |  1 +
>  2 files changed, 15 insertions(+)
> 
> 

The patches look fine, but it's unclear what you want to happen with them
as long as the maintainer situation is not resolved. I've seen patches
from Vladimir and you recently, and none from Roland, so I think it would
be good if one or both of you could officially step up to be maintainers
and collect all patches to forward them to arm at kernel.org for inclusion.

Once we have an agreement on who does this, please send a patch to
update the MAINTAINERS file.

For the patch descriptions, please always start the subject with 'ARM',
not 'arm' to follow the common convention, and always add a multi-line
description even for trivial patches.

	Arnd