[PATCH 4/5] ARM: S3C24XX: convert boards to use common restart function

[heiko@sntech.de (Heiko Stübner)]

Am Donnerstag, 23. Januar 2014, 19:51:34 schrieb Tomasz Figa:
> On 23.01.2014 19:36, Heiko St?bner wrote:
> > Am Donnerstag, 23. Januar 2014, 19:12:04 schrieb Tomasz Figa:
> >> Hi Heiko,
> >> 
> >> On 06.01.2014 19:40, Heiko St?bner wrote:
> >>> This converts all boards to use the new common restart function instead
> >>> of SoC specific ones.
> >>> 
> >>> The mach-s3c2416-dt board now tries to setup either a swrst- or
> >>> watchdog-
> >>> reset so that it will be able to handle more s3c24xx-SoCs later on.
> >> 
> >> [snip]
> >> 
> >>> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> >>> b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 0a86953..88716fa4 100644
> >>> --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> >>> +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> >>> @@ -24,6 +24,7 @@
> >>> 
> >>>    #include <plat/cpu.h>
> >>>    #include <plat/pm.h>
> >>> 
> >>> +#include <plat/watchdog-reset.h>
> >>> 
> >>>    #include "common.h"
> >>> 
> >>> @@ -34,6 +35,14 @@ static void __init s3c2416_dt_map_io(void)
> >>> 
> >>>    static void __init s3c2416_dt_machine_init(void)
> >>>    {
> >>> 
> >>> +	s3c24xx_swrst_reset_of_init();
> >>> +
> >>> +#ifdef CONFIG_SAMSUNG_WDT_RESET
> >>> +	/* if no special swrst-device exists try to find a watchdog */
> >>> +	if (!s3c24xx_swrst_reset_available())
> >>> +		samsung_wdt_reset_of_init();
> >>> +#endif
> >> 
> >> Hmm... I think it would be safe to assume availability of soft reset,
> >> especially if you could move the restart code to the clock driver.
> > 
> > ok, so something like the following:
> > 
> > the boards would simply use samsung_watchdog_reset, which should according
> > to the manuals be available on all architectures. And the ccf-driver on
> > appropriate architectures would simple replace the arm_pm_restart
> > callback with its own SoC specific one?
> > 
> > For the s3c2412 this also means that the clock-logic would get simplified.
> > 
> > 
> > Like this, or do I overlook something?
> 
> Hmm, this would mean a dependency on CONFIG_SAMSUNG_WDT_RESET then. Is
> there a need to fall back to it on platforms which support soft reset
> (assuming that CCF driver would always install its restart handler on
> applicable platforms)?

s3c2410, s3c2440 and s3c2442 do not have the swrst facility. They always use 
samsung_wdt_reset.

In general, I want to try establishing some sort of general restart way, as in 
the future one dt-board should hopefully be enough to cover all s3c24xx soc 
variants.


> Note that you can make the restart field NULL in mach_desc in board files.

As I said above, this is mainly meant for the dt-case. The legacy-board files 
are more or less only secondary, and the affected boards can of course then 
have a NULL restart handle :-) .

So for this the dt-board could simply use the wdt-reset, which then gets 
replaced by the ccf-based reset if appropriate.


Heiko