Re: [PATCH] dt-bindings: ata: atmel: remove at91 compact flash documentation

Nicolas Ferre
2024-02-05T12:51:32Z

On 05/02/2024 at 11:52, Hari Prasath G E - I63539 wrote:
> The compatible "at91rm9200-cf" is not used by any driver,hence remove the
> corresponding documentation.
>
> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
> .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 -------------------
> 1 file changed, 19 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
> deleted file mode 100644
> index c1d22b3ae134..000000000000
> --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -Atmel AT91RM9200 CompactFlash
> -
> -Required properties:
> -- compatible : "atmel,at91rm9200-cf".
> -- reg : should specify localbus address and size used.
> -- gpios : specifies the gpio pins to control the CF device. Detect
> - and reset gpio's are mandatory while irq and vcc gpio's are
> - optional and may be set to 0 if not present.
> -
> -Example:
> -compact-flash@50000000 {
> - compatible = "atmel,at91rm9200-cf";
> - reg = <0x50000000 0x30000000>;
> - gpios = <&pioC 13 0 /* irq */
> - &pioC 15 0 /* detect */
> - 0 /* vcc */
> - &pioC 5 0 /* reset */
> - >;
> -};