Re: [PATCH v3 3/3] arm64: dts: add description for solidrun imx8mp hummingboard variants

[Josua Mayer <josua@solid-run.com>]

Am 11.09.25 um 03:51 schrieb Shawn Guo:
> On Sat, Aug 23, 2025 at 05:28:23PM +0300, Josua Mayer wrote:
>> Add descriptions for the SolidRun i.MX8M Plus System on Module based
>> HummingBoard product-line. They share a common designed based on the
>> "Pulse" version, defined by various assembly options.
>>
>> The HummingBoard Pulse features:
>> - 2x RJ45 Ethernet
>> - 2x USB-3.0 Type A
>> - HDMI connector
>> - mini-HDMI connector
>> - microSD connector
>> - mini-PCI-E connector with SIM slot supporting USB-2.0/3.0 interfaces
>> - M.2 connector with SIM slot supporting USB-2.0/3.0 interfaces
>> - MIPI-CSI Camera Connector (not described without specific camera)
>> - 3.5mm Analog Stereo Out / Microphone In Headphone Jack
>> - RTC with backup battery
>>
>> The variants Mate and Ripple are reduced versions of Pulse.
>>
>> The HummingBoard Pro extends Pulse with PCI-E on M.2 connector.
>>
>> Signed-off-by: Josua Mayer <josua@solid-run.com>
> It doesn't apply to imx/dt64 branch.
It looks like the Makefile has changed very slightly causing some fuzz.
Please see v4 - which I tried to rebase on imx/dt64 from earlier today.
>
> Shawn
>
>