From: m.szyprowski@samsung.com (Marek Szyprowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFT PATCH] ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine
Date: Tue, 12 Dec 2017 08:01:27 +0100 [thread overview]
Message-ID: <3e6e4b15-9f8a-bea1-3c8e-2d85fc4c512d@samsung.com> (raw)
In-Reply-To: <20171211224856.29264-1-javierm@redhat.com>
Hi
On 2017-12-11 23:48, Javier Martinez Canillas wrote:
> Commit 1cb686c08d12 ("ARM: dts: exynos: Add status property to Exynos 542x
> Mixer nodes") disabled the Mixer node by default in the DTSI and enabled
> for each Exynos 542x DTS. But unfortunately it missed to enable it for the
> Exynos5800 Peach Pi machine, since the 5800 is also an 542x SoC variant.
>
> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>
> I believe this may cause the boot issues reported on Exynos5800 Peach Pi
> from v4.15-rc3, the mentioned commit made to v4.15-rc1 but it seems that
> didn't cause any harm until commit ("510353a63796 drm/bridge: analogix
> dp: Fix runtime PM state in get_modes() callback") fixed the runtime PM
> management in the DP driver.
Thanks for analyzing this. Lack of this change was probably responsible for
Exynos DRM initialization failure ("exynos-drm exynos-drm: failed to bind
14530000.hdmi (ops hdmi_component_ops): -1" message and probably further
error "unbalanced disables for lcd_vdd", which shows that failure path of
analogix dp and simple panel causes unbalanced regulator disable.
This patch should go to v4.15-rcX (fixes) if possible.
> I can't test right now, but I'm posting anyways as a RFT in case others
> that have access to a Peach Pi can test it.
>
> Best regards,
> Javier
>
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index b2b95ff205e8..0029ec27819c 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -664,6 +664,10 @@
> status = "okay";
> };
>
> +&mixer {
> + status = "okay";
> +};
> +
> /* eMMC flash */
> &mmc_0 {
> status = "okay";
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
next prev parent reply other threads:[~2017-12-12 7:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171211224905epcas1p4e6d66369f60c7dae0678efc95d0bdb6e@epcas1p4.samsung.com>
2017-12-11 22:48 ` [RFT PATCH] ARM: dts: exynos: Enable Mixer node for Exynos5800 Peach Pi machine Javier Martinez Canillas
2017-12-12 7:01 ` Marek Szyprowski [this message]
2017-12-12 7:41 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e6e4b15-9f8a-bea1-3c8e-2d85fc4c512d@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox