From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefan.wahren@i2se.com (Stefan Wahren) Date: Mon, 14 Nov 2016 16:32:45 +0100 Subject: [PATCH 1/2] pinctrl: bcm2835: Fix ints for GPIOs 28-31 & 46-53 In-Reply-To: <1479126206-20482-1-git-send-email-linus.walleij@linaro.org> References: <1479126206-20482-1-git-send-email-linus.walleij@linaro.org> Message-ID: <427a3d44-16aa-258c-8722-48d9c7ffb593@i2se.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Linus, Am 14.11.2016 um 13:23 schrieb Linus Walleij: > From: Phil Elwell > > Contrary to the documentation, the BCM2835 GPIO controller actually > has four interrupt lines - one each for the three IRQ groups and one > common. Confusingly, the GPIO interrupt groups don't correspond > directly with the GPIO control banks. Instead, GPIOs 0-27 generate IRQ > GPIO0, 28-45 IRQ GPIO1 and 46-53 IRQ GPIO2. > > Awkwardly, the GPIOs for IRQ GPIO1 straddle two 32-entry GPIO banks, > so split out a function to process the interrupts for a single GPIO > bank. > > Cc: Stefan Wahren > Cc: Eric Anholt > Cc: Stephen Warren > Signed-off-by: Phil Elwell > Signed-off-by: Linus Walleij > --- > I want to apply this to cater for my GPIOLIB_IRQCHIP > refactorings. > --- > drivers/pinctrl/bcm/pinctrl-bcm2835.c | 51 ++++++++++++++++++++++++++--------- > 1 file changed, 39 insertions(+), 12 deletions(-) > > diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c > index b2dd278f18b1..1d8fc104e26b 100644 > --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c > +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c > ... > @@ -1076,6 +1102,7 @@ static struct platform_driver bcm2835_pinctrl_driver = { > .remove = bcm2835_pinctrl_remove, > .driver = { > .name = MODULE_NAME, > + .owner = THIS_MODULE, this is unnecessary. Please remove it. Thanks for submitting these patches Stefan > .of_match_table = bcm2835_pinctrl_match, > }, > };