Re: [PATCH v3 0/3] add sysfs nodes to configure TPDA's registers

[Jie Gan <jie.gan@oss.qualcomm.com>]

On 10/27/2025 5:29 PM, Suzuki K Poulose wrote:
> On 27/10/2025 01:14, Jie Gan wrote:
>>
>>
>> On 8/27/2025 6:55 PM, Jie Gan wrote:
>>> Patchset 1 introduces configuration of the cross-trigger registers with
>>> appropriate values to enable proper generation of cross-trigger packets.
>>>
>>> Patchset 2 introduces a logic to configure the TPDA_SYNCR register,
>>> which determines the frequency of ASYNC packet generation. These packets
>>> assist userspace tools in accurately identifying each valid packet.
>>>
>>> Patchset 3 introduces a sysfs node to initiate a flush request for the
>>> specific port, forcing the data to synchronize and be transmitted to the
>>> sink device.
>>>
>>
>> Gentle reminder.
> 
> Please could you fix the dates and version to v6.19 ?

Sure, will send a new version with fix.

Thanks,
Jie

> 
> Suzuki
> 
>>
>> Thanks,
>> Jie
>>
>>> Changes in V3:
>>> 1. Optimizing codes according to James's comment.
>>> Link to V2 - https://lore.kernel.org/all/20250827042042.6786-1- 
>>> jie.gan@oss.qualcomm.com/
>>>
>>> Changes in V2:
>>> 1. Refactoring the code based on James's comment for optimization.
>>> Link to V1 - https://lore.kernel.org/all/20250826070150.5603-1- 
>>> jie.gan@oss.qualcomm.com/
>>>
>>> Tao Zhang (3):
>>>    coresight: tpda: add sysfs nodes for tpda cross-trigger configuration
>>>    coresight: tpda: add logic to configure TPDA_SYNCR register
>>>    coresight: tpda: add sysfs node to flush specific port
>>>
>>>   .../testing/sysfs-bus-coresight-devices-tpda  |  50 ++++
>>>   drivers/hwtracing/coresight/coresight-tpda.c  | 278 ++++++++++++++++++
>>>   drivers/hwtracing/coresight/coresight-tpda.h  |  33 ++-
>>>   3 files changed, 360 insertions(+), 1 deletion(-)
>>>   create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight- 
>>> devices-tpda
>>>
>>
>