From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/2] Rockchip dts changes for 4.3, part1
Date: Fri, 17 Jul 2015 00:36:22 +0200 [thread overview]
Message-ID: <43550625.L2USv7p8yj@diego> (raw)
In-Reply-To: <2820374.NgluYWXZkW@diego>
The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v4.3-rockchip32-dts1
for you to fetch changes up to 4863dcd394019b542ac968870cba734d27e992e0:
ARM: dts: rockchip: add rk3288 arm-pmu irq affinity (2015-07-16 22:22:47 +0200)
----------------------------------------------------------------
This adds the board for the Netxeon R89 used in different
TV-boxes and the initial support for two Chromebooks from
the veyron family.
Additionally a non-critical fix for the watchdog irq
on rk3288, addition of the gmac reset line, a ramp delay
for the cpu regulator on the firefly board and cpu affinity
for the arm-pmu spi irqs.
----------------------------------------------------------------
Alexandru M Stan (2):
ARM: dts: rockchip: add shared rk3288-veyron files
ARM: dts: rockchip: add veyron-jerry board
Chris Zhong (1):
ARM: dts: Add sbs-battery dts fragment used by chromebooks
Heiko Stuebner (7):
ARM: dts: rockchip: fix rk3288 watchdog irq
dt-bindings: add vendor prefix for Netxeon Technology
ARM: dts: rockchip: add Netxeon R89 board
ARM: dts: rockchip: add veyron-pinky board
ARM: dts: rockchip: add missing device_type = "memory" to boards
dt-bindings: document rk3368 R88 board from Rockchip
ARM: dts: rockchip: add rk3288 arm-pmu irq affinity
Romain Perier (2):
ARM: dts: rockchip: Add STMMAC reset signal in GMAC interface for rk3288
ARM: dts: rockchip: Add ramp delay for vdd_cpu in firefly board dts
Documentation/devicetree/bindings/arm/rockchip.txt | 20 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/cros-ec-sbs.dtsi | 52 ++
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 1 +
arch/arm/boot/dts/rk3066a-marsboard.dts | 1 +
arch/arm/boot/dts/rk3066a-rayeager.dts | 1 +
arch/arm/boot/dts/rk3188-radxarock.dts | 1 +
arch/arm/boot/dts/rk3288-evb.dtsi | 1 +
arch/arm/boot/dts/rk3288-firefly.dtsi | 3 +
arch/arm/boot/dts/rk3288-popmetal.dts | 1 +
arch/arm/boot/dts/rk3288-r89.dts | 413 +++++++++++++++
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 232 +++++++++
arch/arm/boot/dts/rk3288-veyron-jerry.dts | 197 +++++++
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 128 +++++
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 122 +++++
arch/arm/boot/dts/rk3288-veyron.dtsi | 563 +++++++++++++++++++++
arch/arm/boot/dts/rk3288.dtsi | 11 +-
18 files changed, 1748 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/cros-ec-sbs.dtsi
create mode 100644 arch/arm/boot/dts/rk3288-r89.dts
create mode 100644 arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
create mode 100644 arch/arm/boot/dts/rk3288-veyron-jerry.dts
create mode 100644 arch/arm/boot/dts/rk3288-veyron-pinky.dts
create mode 100644 arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
create mode 100644 arch/arm/boot/dts/rk3288-veyron.dtsi
next prev parent reply other threads:[~2015-07-16 22:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 22:32 [PATCH and GIT PULL 0/5] ARM: initial Rockchip stuff for 4.3 Heiko Stübner
2015-07-16 22:33 ` [PATCH 1/3] arm64: add Rockchip architecture entry Heiko Stübner
2015-07-17 17:33 ` Olof Johansson
2015-07-16 22:34 ` [PATCH 2/3] arm64: defconfig: enable ARCH_ROCKCHIP Heiko Stübner
2015-07-17 17:38 ` Olof Johansson
2015-07-16 22:34 ` [PATCH 3/3] arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board Heiko Stübner
2015-07-17 17:35 ` Olof Johansson
2015-07-16 22:35 ` [GIT PULL 1/2] Rockchip soc changes for 4.3, part1 Heiko Stübner
2015-07-17 17:38 ` Olof Johansson
2015-07-16 22:36 ` Heiko Stübner [this message]
2015-07-17 17:38 ` [GIT PULL 2/2] Rockchip dts " Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43550625.L2USv7p8yj@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).