From: "Pandey, Radhey Shyam" <radheys@amd.com>
To: Ajay Neeli <ajay.neeli@amd.com>,
git@amd.com, andi.shyti@kernel.org,
linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: michal.simek@amd.com, srinivas.goud@amd.com, radhey.shyam.pandey@amd.com
Subject: Re: [PATCH v4] i2c: cadence: Add shutdown handler
Date: Tue, 9 Jun 2026 10:42:50 +0530 [thread overview]
Message-ID: <443b6385-b4c0-4811-b62a-b68998cc6ee2@amd.com> (raw)
In-Reply-To: <20260430053050.3590173-1-ajay.neeli@amd.com>
> During system reboot or kexec, in-flight I2C transfers can cause
> spurious interrupts or leave the bus in an undefined state. Add a
> shutdown handler that marks the adapter suspended and resets the
> controller, ensuring a clean handoff.
>
> Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Thanks!
> ---
> Link: https://lore.kernel.org/linux-i2c/20250730122907.18909-1-ajay.neeli@amd.com/
>
> Changes v3->v4:
> - Replaced disable_irq() with cdns_i2c_master_reset() to avoid
> potential deadlocks during shutdown
> - Added pm_runtime_status_suspended() check to skip register access
> when clocks are disabled
>
> Changes v2->v3:
> Corrected a typo that caused a build error in v2
>
> Changes in v1->v2:
> Disable interrupts
> ---
> drivers/i2c/busses/i2c-cadence.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> index 0fb728ade92e..da8770182a18 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -1635,6 +1635,25 @@ static void cdns_i2c_remove(struct platform_device *pdev)
> reset_control_assert(id->reset);
> }
>
> +/**
> + * cdns_i2c_shutdown - Prepare I2C controller for system shutdown
> + * @pdev: Handle to the platform device structure
> + *
> + * Mark the adapter as suspended and reset the controller to ensure a clean
> + * handoff during system reboot or kexec.
> + */
> +static void cdns_i2c_shutdown(struct platform_device *pdev)
> +{
> + struct cdns_i2c *id = platform_get_drvdata(pdev);
> +
> + /* Mark the adapter as suspended to prevent further I2C transfers */
> + i2c_mark_adapter_suspended(&id->adap);
> +
> + /* Reset the controller state if active - clocks are disabled when suspended */
> + if (!pm_runtime_status_suspended(&pdev->dev))
> + cdns_i2c_master_reset(&id->adap);
> +}
> +
> static struct platform_driver cdns_i2c_drv = {
> .driver = {
> .name = DRIVER_NAME,
> @@ -1643,6 +1662,7 @@ static struct platform_driver cdns_i2c_drv = {
> },
> .probe = cdns_i2c_probe,
> .remove = cdns_i2c_remove,
> + .shutdown = cdns_i2c_shutdown,
> };
>
> module_platform_driver(cdns_i2c_drv);
next prev parent reply other threads:[~2026-06-09 5:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-30 5:30 [PATCH v4] i2c: cadence: Add shutdown handler Ajay Neeli
2026-06-09 5:12 ` Pandey, Radhey Shyam [this message]
2026-06-09 6:39 ` Andi Shyti
2026-06-09 6:44 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=443b6385-b4c0-4811-b62a-b68998cc6ee2@amd.com \
--to=radheys@amd.com \
--cc=ajay.neeli@amd.com \
--cc=andi.shyti@kernel.org \
--cc=git@amd.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=radhey.shyam.pandey@amd.com \
--cc=srinivas.goud@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox