public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: t.figa@samsung.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
Date: Mon, 09 Dec 2013 18:20:55 +0100	[thread overview]
Message-ID: <4578558.zGLnaeVPQ1@amdc1227> (raw)
In-Reply-To: <201312031619.58062.heiko@sntech.de>

Hi Heiko,

On Tuesday 03 of December 2013 16:19:57 Heiko St?bner wrote:
> Resurrecting this series again after to much time.
> 
> Changed is the pll registration to follow the new system and getting the
> external clocks from dt fixed-rate clocks.
> 
> Hopefully I did address all comments received for v2 in july.
> 
> Tested on both non-dt and dt s3c2416. As s3c2443 is working the same way it
> should work, but is only compile tested.
> 
> Heiko Stuebner (5):
>   clk: samsung: add pll_6552 variant for s3c2416
>   clk: samsung: add plls used by the s3c2443
>   dt-bindings: add binding for clock-controller of s3c2443 and following
>   clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450
>   ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
> 
>  .../bindings/clock/samsung,s3c2443-clock.txt       |   46 ++
>  arch/arm/boot/dts/s3c2416-smdk2416.dts             |    9 +
>  arch/arm/boot/dts/s3c2416.dtsi                     |   48 ++
>  arch/arm/mach-s3c24xx/Kconfig                      |   14 +-
>  arch/arm/mach-s3c24xx/Makefile                     |    5 +-
>  arch/arm/mach-s3c24xx/clock-s3c2416.c              |  171 -----
>  arch/arm/mach-s3c24xx/clock-s3c2443.c              |  212 ------
>  arch/arm/mach-s3c24xx/common-s3c2443.c             |  675 --------------------
>  arch/arm/mach-s3c24xx/common.c                     |   16 +-
>  arch/arm/mach-s3c24xx/common.h                     |    6 +
>  arch/arm/mach-s3c24xx/mach-s3c2416-dt.c            |   39 +-
>  arch/arm/mach-s3c24xx/mach-smdk2416.c              |    9 +-
>  arch/arm/mach-s3c24xx/mach-smdk2443.c              |    9 +-
>  drivers/clk/samsung/Makefile                       |    1 +
>  drivers/clk/samsung/clk-pll.c                      |   84 ++-
>  drivers/clk/samsung/clk-pll.h                      |    3 +
>  drivers/clk/samsung/clk-s3c2443.c                  |  417 ++++++++++++
>  include/dt-bindings/clock/samsung,s3c2443-clock.h  |   92 +++
>  18 files changed, 742 insertions(+), 1114 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
>  delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
>  create mode 100644 drivers/clk/samsung/clk-s3c2443.c
>  create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h

Thanks for you great work on S3C24xx.

Except for my (minor) comments on patches 3 and 5:

Acked-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz

      parent reply	other threads:[~2013-12-09 17:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-03 15:19 [PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-03 15:20 ` [PATCH v3 1/5] clk: samsung: add pll_6552 variant for s3c2416 Heiko Stübner
2013-12-03 15:21 ` [PATCH v3 2/5] clk: samsung: add plls used by the s3c2443 Heiko Stübner
2013-12-03 15:23 ` [PATCH v3 3/5] dt-bindings: add binding for clock-controller of s3c2443 and following Heiko Stübner
2013-12-09 17:03   ` Tomasz Figa
2013-12-03 15:23 ` [PATCH v3 4/5] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450 Heiko Stübner
2013-12-03 15:24 ` [PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework Heiko Stübner
2013-12-09 17:19   ` Tomasz Figa
2013-12-10 10:57     ` Heiko Stübner
2013-12-09 17:20 ` Tomasz Figa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4578558.zGLnaeVPQ1@amdc1227 \
    --to=t.figa@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox