[PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[Heiko Stübner]

Resurrecting this series again after to much time.

Changed is the pll registration to follow the new system and getting the
external clocks from dt fixed-rate clocks.

Hopefully I did address all comments received for v2 in july.

Tested on both non-dt and dt s3c2416. As s3c2443 is working the same way it
should work, but is only compile tested.

Heiko Stuebner (5):
  clk: samsung: add pll_6552 variant for s3c2416
  clk: samsung: add plls used by the s3c2443
  dt-bindings: add binding for clock-controller of s3c2443 and following
  clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450
  ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

 .../bindings/clock/samsung,s3c2443-clock.txt       |   46 ++
 arch/arm/boot/dts/s3c2416-smdk2416.dts             |    9 +
 arch/arm/boot/dts/s3c2416.dtsi                     |   48 ++
 arch/arm/mach-s3c24xx/Kconfig                      |   14 +-
 arch/arm/mach-s3c24xx/Makefile                     |    5 +-
 arch/arm/mach-s3c24xx/clock-s3c2416.c              |  171 -----
 arch/arm/mach-s3c24xx/clock-s3c2443.c              |  212 ------
 arch/arm/mach-s3c24xx/common-s3c2443.c             |  675 --------------------
 arch/arm/mach-s3c24xx/common.c                     |   16 +-
 arch/arm/mach-s3c24xx/common.h                     |    6 +
 arch/arm/mach-s3c24xx/mach-s3c2416-dt.c            |   39 +-
 arch/arm/mach-s3c24xx/mach-smdk2416.c              |    9 +-
 arch/arm/mach-s3c24xx/mach-smdk2443.c              |    9 +-
 drivers/clk/samsung/Makefile                       |    1 +
 drivers/clk/samsung/clk-pll.c                      |   84 ++-
 drivers/clk/samsung/clk-pll.h                      |    3 +
 drivers/clk/samsung/clk-s3c2443.c                  |  417 ++++++++++++
 include/dt-bindings/clock/samsung,s3c2443-clock.h  |   92 +++
 18 files changed, 742 insertions(+), 1114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
 delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
 create mode 100644 drivers/clk/samsung/clk-s3c2443.c
 create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h

-- 
1.7.10.4

[PATCH v3 1/5] clk: samsung: add pll_6552 variant for s3c2416

[Heiko Stübner]

According to the manual s3c2416 and s3c2450 use a pll 6552 and 6553
and while the pll_6553 matches exactly the one already implemented
the pll_6552 differs to the one from the s3c64xx series.

The change is solely in the bit locations of the mdiv and pdiv values.
All calculations are the same for both implementatons and even the
proposed divider-values for specific frequencies in the manuals are
the same.

Therefore implement a variant that simply uses the changed bit
locations if necessary.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/samsung/clk-pll.c |   12 ++++++++++--
 drivers/clk/samsung/clk-pll.h |    1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 529e11d..c37d033 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -564,7 +564,9 @@ static const struct clk_ops samsung_pll46xx_clk_min_ops = {
 #define PLL6552_PDIV_MASK	0x3f
 #define PLL6552_SDIV_MASK	0x7
 #define PLL6552_MDIV_SHIFT	16
+#define PLL6552_MDIV_SHIFT_2416	14
 #define PLL6552_PDIV_SHIFT	8
+#define PLL6552_PDIV_SHIFT_2416	5
 #define PLL6552_SDIV_SHIFT	0
 
 static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
@@ -575,8 +577,13 @@ static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw,
 	u64 fvco = parent_rate;
 
 	pll_con = __raw_readl(pll->con_reg);
-	mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
-	pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	if (pll->type == pll_6552_s3c2416) {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK;
+	} else {
+		mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK;
+		pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK;
+	}
 	sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK;
 
 	fvco *= mdiv;
@@ -773,6 +780,7 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 			init.ops = &samsung_pll36xx_clk_ops;
 		break;
 	case pll_6552:
+	case pll_6552_s3c2416:
 		init.ops = &samsung_pll6552_clk_ops;
 		break;
 	case pll_6553:
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index 6c39030..ddf9029 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -24,6 +24,7 @@ enum samsung_pll_type {
 	pll_4650,
 	pll_4650c,
 	pll_6552,
+	pll_6552_s3c2416,
 	pll_6553,
 };
 
-- 
1.7.10.4

[PATCH v3 2/5] clk: samsung: add plls used by the s3c2443

[Heiko Stübner]

The s3c2443 uses different plls that are not present yet. Therefore
add the two needed types.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/samsung/clk-pll.c |   72 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/samsung/clk-pll.h |    2 ++
 2 files changed, 74 insertions(+)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index c37d033..461a6bf 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -59,6 +59,72 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
 }
 
 /*
+ * PLL2126 Clock Type
+ */
+
+#define PLL2126_MDIV_MASK	(0xff)
+#define PLL2126_PDIV_MASK	(0x3f)
+#define PLL2126_SDIV_MASK	(0x3)
+#define PLL2126_MDIV_SHIFT	(16)
+#define PLL2126_PDIV_SHIFT	(8)
+#define PLL2126_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK;
+	pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK;
+	sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK;
+
+	fvco *= (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll2126_clk_ops = {
+	.recalc_rate = samsung_pll2126_recalc_rate,
+};
+
+/*
+ * PLL3000 Clock Type
+ */
+
+#define PLL3000_MDIV_MASK	(0xff)
+#define PLL3000_PDIV_MASK	(0x3)
+#define PLL3000_SDIV_MASK	(0x3)
+#define PLL3000_MDIV_SHIFT	(16)
+#define PLL3000_PDIV_SHIFT	(8)
+#define PLL3000_SDIV_SHIFT	(0)
+
+static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct samsung_clk_pll *pll = to_clk_pll(hw);
+	u32 pll_con, mdiv, pdiv, sdiv;
+	u64 fvco = parent_rate;
+
+	pll_con = __raw_readl(pll->con_reg);
+	mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK;
+	pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK;
+	sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK;
+
+	fvco *= (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned long)fvco;
+}
+
+static const struct clk_ops samsung_pll3000_clk_ops = {
+	.recalc_rate = samsung_pll3000_recalc_rate,
+};
+
+/*
  * PLL35xx Clock Type
  */
 /* Maximum lock time can be 270 * PDIV cycles */
@@ -753,6 +819,12 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
 	}
 
 	switch (pll_clk->type) {
+	case pll_2126:
+		init.ops = &samsung_pll2126_clk_ops;
+		break;
+	case pll_3000:
+		init.ops = &samsung_pll3000_clk_ops;
+		break;
 	/* clk_ops for 35xx and 2550 are similar */
 	case pll_35xx:
 	case pll_2550:
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index ddf9029..5b64bdb 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -13,6 +13,8 @@
 #define __SAMSUNG_CLK_PLL_H
 
 enum samsung_pll_type {
+	pll_2126,
+	pll_3000,
 	pll_35xx,
 	pll_36xx,
 	pll_2550,
-- 
1.7.10.4

[PATCH v3 3/5] dt-bindings: add binding for clock-controller of s3c2443 and following

[Heiko Stübner]

Starting with the s3c2443 the s3c24xx series got a new clock tree
compared to the previous s3c24xx socs. This binding describes the
clock controller found in the s3c2443, s3c2416 and s3c2450 socs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 .../bindings/clock/samsung,s3c2443-clock.txt       |   46 ++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
new file mode 100644
index 0000000..a3eb4ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
@@ -0,0 +1,46 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c2443-clock.h header and can be used in device
+tree sources.
+
+Example: Clock controller node:
+
+	clocks: clock-controller at 4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial at 50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};
-- 
1.7.10.4

[PATCH v3 3/5] dt-bindings: add binding for clock-controller of s3c2443 and following

[Tomasz Figa]

Hi Heiko,

On Tuesday 03 of December 2013 16:23:09 Heiko St?bner wrote:
> Starting with the s3c2443 the s3c24xx series got a new clock tree
> compared to the previous s3c24xx socs. This binding describes the
> clock controller found in the s3c2443, s3c2416 and s3c2450 socs.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  .../bindings/clock/samsung,s3c2443-clock.txt       |   46 ++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
> new file mode 100644
> index 0000000..a3eb4ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
> @@ -0,0 +1,46 @@
> +* Samsung S3C2443 Clock Controller
> +
> +The S3C2443 clock controller generates and supplies clock to various controllers
> +within the SoC. The clock binding described here is applicable to all SoCs in
> +the s3c24x family starting with the s3c2443.
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> +  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
> +  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
> +  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. Some of the clocks are available only
> +on a particular SoC.
> +
> +All available clocks are defined as preprocessor macros in
> +dt-bindings/clock/samsung,s3c2443-clock.h header and can be used in device
> +tree sources.

I believe this driver needs some external clocks to be defined as fixed
rate clocks using generic bindings. It should be noted what clocks are
needed here in the documentation.

Otherwise the patch looks fine.

Best regards,
Tomasz

[PATCH v3 4/5] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450

[Heiko Stübner]

The three SoCs share a common clock tree which only differs in the
existence of some special clocks.

As with all parts common to these three SoCs the driver is named
after the s3c2443, as it was the first SoC introducing this structure
and there exists no other label to describe this s3c24xx epoch.

The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure. As an example the sclk_uart gate was never handled previously
and the div_uart was made to be the clock used by the serial driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/Kconfig                     |    6 +
 drivers/clk/samsung/Makefile                      |    1 +
 drivers/clk/samsung/clk-s3c2443.c                 |  417 +++++++++++++++++++++
 include/dt-bindings/clock/samsung,s3c2443-clock.h |   92 +++++
 4 files changed, 516 insertions(+)
 create mode 100644 drivers/clk/samsung/clk-s3c2443.c
 create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 8f1d327..2eeeb55 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -670,6 +670,12 @@ config S3C2443_COMMON
 	  Common code for the S3C2443 and similar processors, which includes
 	  the S3C2416 and S3C2450.
 
+config S3C2443_COMMON_CLK
+	bool
+	help
+	  Temporary symbol to build the clock driver based on the common clock
+	  framework.
+
 config S3C2443_DMA
 	bool
 	help
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 8eb4799..4c892c6 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
 obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
 obj-$(CONFIG_SOC_EXYNOS5440)	+= clk-exynos5440.o
 obj-$(CONFIG_ARCH_EXYNOS)	+= clk-exynos-audss.o
+obj-$(CONFIG_S3C2443_COMMON_CLK)+= clk-s3c2443.o
 obj-$(CONFIG_ARCH_S3C64XX)	+= clk-s3c64xx.o
diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c
new file mode 100644
index 0000000..d325f38
--- /dev/null
+++ b/drivers/clk/samsung/clk-s3c2443.c
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for S3C2443 and following SoCs.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/samsung,s3c2443-clock.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/* S3C2416 clock controller register offsets */
+#define LOCKCON0	0x00
+#define LOCKCON1	0x04
+#define MPLLCON		0x10
+#define EPLLCON		0x18
+#define EPLLCON_K	0x1C
+#define CLKSRC		0x20
+#define CLKDIV0		0x24
+#define CLKDIV1		0x28
+#define CLKDIV2		0x2C
+#define HCLKCON		0x30
+#define PCLKCON		0x34
+#define SCLKCON		0x38
+
+/* the soc types */
+enum supported_socs {
+	S3C2416,
+	S3C2443,
+	S3C2450,
+};
+
+/* list of PLLs to be registered */
+enum s3c2443_plls {
+	mpll, epll,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static unsigned long s3c2443_clk_regs[] __initdata = {
+	LOCKCON0,
+	LOCKCON1,
+	MPLLCON,
+	EPLLCON,
+	EPLLCON_K,
+	CLKSRC,
+	CLKDIV0,
+	CLKDIV1,
+	CLKDIV2,
+	PCLKCON,
+	HCLKCON,
+	SCLKCON,
+};
+
+PNAME(epllref_p) = { "mpllref", "mpllref", "xti", "ext" };
+PNAME(esysclk_p) = { "epllref", "epll" };
+PNAME(mpllref_p) = { "xti", "mdivclk" };
+PNAME(msysclk_p) = { "mpllref", "mpll" };
+PNAME(armclk_p) = { "armdiv" , "hclk" };
+PNAME(i2s0_p) = { "div_i2s0", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_mux_clock s3c2443_common_muxes[] __initdata = {
+	MUX(0, "epllref", epllref_p, CLKSRC, 7, 2),
+	MUX(ESYSCLK, "esysclk", esysclk_p, CLKSRC, 6, 1),
+	MUX(0, "mpllref", mpllref_p, CLKSRC, 3, 1),
+	MUX_A(MSYSCLK, "msysclk", msysclk_p, CLKSRC, 4, 1, "msysclk"),
+	MUX_A(ARMCLK, "armclk", armclk_p, CLKDIV0, 13, 1, "armclk"),
+	MUX(0, "mux_i2s0", i2s0_p, CLKSRC, 14, 2),
+};
+
+static struct clk_div_table hclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 3, .div = 4 },
+	{ .div = 0 },
+};
+
+static struct clk_div_table mdivclk_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 3 },
+	{ .val = 2, .div = 5 },
+	{ .val = 3, .div = 7 },
+	{ .val = 4, .div = 9 },
+	{ .val = 5, .div = 11 },
+	{ .val = 6, .div = 13 },
+	{ .val = 7, .div = 15 },
+	{ .div = 0 },
+};
+
+struct samsung_div_clock s3c2443_common_dividers[] __initdata = {
+	DIV_T(0, "mdivclk", "xti", CLKDIV0, 6, 3, mdivclk_d),
+	DIV(0, "prediv", "msysclk", CLKDIV0, 4, 2),
+	DIV_T(HCLK, "hclk", "prediv", CLKDIV0, 0, 2, hclk_d),
+	DIV(PCLK, "pclk", "hclk", CLKDIV0, 2, 1),
+	DIV(0, "div_hsspi0_epll", "esysclk", CLKDIV1, 24, 2),
+	DIV(0, "div_fimd", "esysclk", CLKDIV1, 16, 8),
+	DIV(0, "div_i2s0", "esysclk", CLKDIV1, 12, 4),
+	DIV(0, "div_uart", "esysclk", CLKDIV1, 8, 4),
+	DIV(0, "div_hsmmc1", "esysclk", CLKDIV1, 6, 2),
+	DIV(0, "div_usbhost", "esysclk", CLKDIV1, 4, 2),
+};
+
+struct samsung_gate_clock s3c2443_common_gates[] __initdata = {
+	GATE(SCLK_HSMMC_EXT, "sclk_hsmmcext", "ext", SCLKCON, 13, 0, 0),
+	GATE(SCLK_HSMMC1, "sclk_hsmmc1", "div_hsmmc1", SCLKCON, 12, 0, 0),
+	GATE(SCLK_FIMD, "sclk_fimd", "div_fimd", SCLKCON, 10, 0, 0),
+	GATE(SCLK_I2S0, "sclk_i2s0", "mux_i2s0", SCLKCON, 9, 0, 0),
+	GATE(SCLK_UART, "sclk_uart", "div_uart", SCLKCON, 8, 0, 0),
+	GATE(SCLK_USBH, "sclk_usbhost", "div_usbhost", SCLKCON, 1, 0, 0),
+	GATE(HCLK_DRAM, "dram", "hclk", HCLKCON, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_SSMC, "ssmc", "hclk", HCLKCON, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_HSMMC1, "hsmmc1", "hclk", HCLKCON, 16, 0, 0),
+	GATE(HCLK_USBD, "usb-device", "hclk", HCLKCON, 12, 0, 0),
+	GATE(HCLK_USBH, "usb-host", "hclk", HCLKCON, 11, 0, 0),
+	GATE(HCLK_LCD, "lcd", "hclk", HCLKCON, 9, 0, 0),
+	GATE(HCLK_DMA5, "dma5", "hclk", HCLKCON, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA4, "dma4", "hclk", HCLKCON, 4, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA3, "dma3", "hclk", HCLKCON, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA2, "dma2", "hclk", HCLKCON, 2, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA1, "dma1", "hclk", HCLKCON, 1, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA0, "dma0", "hclk", HCLKCON, 0, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_GPIO, "gpio", "pclk", PCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_RTC, "rtc", "pclk", PCLKCON, 12, 0, 0),
+	GATE(PCLK_WDT, "wdt", "pclk", PCLKCON, 11, 0, 0),
+	GATE(PCLK_PWM, "pwm", "pclk", PCLKCON, 10, 0, 0),
+	GATE(PCLK_I2S0, "i2s0", "pclk", PCLKCON, 9, 0, 0),
+	GATE(PCLK_AC97, "ac97", "pclk", PCLKCON, 8, 0, 0),
+	GATE(PCLK_ADC, "adc", "pclk", PCLKCON, 7, 0, 0),
+	GATE(PCLK_SPI0, "spi0", "pclk", PCLKCON, 6, 0, 0),
+	GATE(PCLK_I2C0, "i2c0", "pclk", PCLKCON, 4, 0, 0),
+	GATE(PCLK_UART3, "uart3", "pclk", PCLKCON, 3, 0, 0),
+	GATE(PCLK_UART2, "uart2", "pclk", PCLKCON, 2, 0, 0),
+	GATE(PCLK_UART1, "uart1", "pclk", PCLKCON, 1, 0, 0),
+	GATE(PCLK_UART0, "uart0", "pclk", PCLKCON, 0, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_common_aliases[] __initdata = {
+	ALIAS(HCLK, NULL, "hclk"),
+	ALIAS(HCLK_SSMC, NULL, "nand"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "uart"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "uart"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "uart"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "uart"),
+	ALIAS(PCLK_UART0, "s3c2440-uart.0", "clk_uart_baud2"),
+	ALIAS(PCLK_UART1, "s3c2440-uart.1", "clk_uart_baud2"),
+	ALIAS(PCLK_UART2, "s3c2440-uart.2", "clk_uart_baud2"),
+	ALIAS(PCLK_UART3, "s3c2440-uart.3", "clk_uart_baud2"),
+	ALIAS(SCLK_UART, NULL, "clk_uart_baud3"),
+	ALIAS(PCLK_PWM, NULL, "timers"),
+	ALIAS(PCLK_RTC, NULL, "rtc"),
+	ALIAS(PCLK_WDT, NULL, "watchdog"),
+	ALIAS(PCLK_ADC, NULL, "adc"),
+	ALIAS(PCLK_I2C0, "s3c2410-i2c.0", "i2c"),
+	ALIAS(HCLK_USBD, NULL, "usb-device"),
+	ALIAS(HCLK_USBH, NULL, "usb-host"),
+	ALIAS(SCLK_USBH, NULL, "usb-bus-host"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi"),
+	ALIAS(PCLK_SPI0, "s3c2443-spi.0", "spi_busclk0"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "hsmmc"),
+	ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
+	ALIAS(PCLK_I2S0, "samsung-i2s.0", "iis"),
+	ALIAS(SCLK_I2S0, NULL, "i2s-if"),
+	ALIAS(HCLK_LCD, NULL, "lcd"),
+	ALIAS(SCLK_FIMD, NULL, "sclk_fimd"),
+};
+
+/* S3C2416 specific clocks */
+
+static struct samsung_pll_clock s3c2416_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_6552_s3c2416, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_6553, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+PNAME(s3c2416_hsmmc0_p) = { "sclk_hsmmc0", "sclk_hsmmcext" };
+PNAME(s3c2416_hsmmc1_p) = { "sclk_hsmmc1", "sclk_hsmmcext" };
+PNAME(s3c2416_hsspi0_p) = { "hsspi0_epll", "hsspi0_mpll" };
+
+static struct clk_div_table armdiv_s3c2416_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 3, .div = 4 },
+	{ .val = 5, .div = 6 },
+	{ .val = 7, .div = 8 },
+	{ .div = 0 },
+};
+
+struct samsung_div_clock s3c2416_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 3, armdiv_s3c2416_d),
+	DIV(0, "div_hsspi0_mpll", "msysclk", CLKDIV2, 0, 4),
+	DIV(0, "div_hsmmc0", "esysclk", CLKDIV2, 6, 2),
+};
+
+struct samsung_mux_clock s3c2416_muxes[] __initdata = {
+	MUX(MUX_HSMMC0, "mux_hsmmc0", s3c2416_hsmmc0_p, CLKSRC, 16, 1),
+	MUX(MUX_HSMMC1, "mux_hsmmc1", s3c2416_hsmmc1_p, CLKSRC, 17, 1),
+	MUX(MUX_HSSPI0, "mux_hsspi0", s3c2416_hsspi0_p, CLKSRC, 18, 1),
+};
+
+struct samsung_gate_clock s3c2416_gates[] __initdata = {
+	GATE(0, "hsspi0_mpll", "div_hsspi0_mpll", SCLKCON, 19, 0, 0),
+	GATE(0, "hsspi0_epll", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(0, "sclk_hsmmc0", "div_hsmmc0", SCLKCON, 6, 0, 0),
+	GATE(HCLK_2D, "2d", "hclk", HCLKCON, 20, 0, 0),
+	GATE(HCLK_HSMMC0, "hsmmc0", "hclk", HCLKCON, 15, 0, 0),
+	GATE(HCLK_IROM, "irom", "hclk", HCLKCON, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_PCM, "pcm", "pclk", PCLKCON, 19, 0, 0),
+};
+
+struct samsung_clock_alias s3c2416_aliases[] __initdata = {
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
+	ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
+	ALIAS(MUX_HSMMC0, "s3c-sdhci.0", "mmc_busclk.2"),
+	ALIAS(MUX_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(MUX_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2443 specific clocks */
+
+static struct samsung_pll_clock s3c2443_pll_clks[] __initdata = {
+	[mpll] = PLL(pll_3000, 0, "mpll", "mpllref",
+						LOCKCON0, MPLLCON, NULL),
+	[epll] = PLL(pll_2126, 0, "epll", "epllref",
+						LOCKCON1, EPLLCON, NULL),
+};
+
+static struct clk_div_table armdiv_s3c2443_d[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 8, .div = 2 },
+	{ .val = 2, .div = 3 },
+	{ .val = 9, .div = 4 },
+	{ .val = 10, .div = 6 },
+	{ .val = 11, .div = 8 },
+	{ .val = 13, .div = 12 },
+	{ .val = 15, .div = 16 },
+	{ .div = 0 },
+};
+
+struct samsung_div_clock s3c2443_dividers[] __initdata = {
+	DIV_T(ARMDIV, "armdiv", "msysclk", CLKDIV0, 9, 4, armdiv_s3c2443_d),
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+};
+
+struct samsung_gate_clock s3c2443_gates[] __initdata = {
+	GATE(SCLK_HSSPI0, "sclk_hsspi0", "div_hsspi0_epll", SCLKCON, 14, 0, 0),
+	GATE(SCLK_CAM, "sclk_cam", "div_cam", SCLKCON, 11, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 15, 0, 0),
+	GATE(PCLK_SDI, "sdi", "pclk", PCLKCON, 5, 0, 0),
+};
+
+struct samsung_clock_alias s3c2443_aliases[] __initdata = {
+	ALIAS(SCLK_HSSPI0, "s3c2443-spi.0", "spi_busclk2"),
+	ALIAS(SCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.2"),
+	ALIAS(SCLK_CAM, NULL, "camif-upll"),
+	ALIAS(PCLK_SPI1, "s3c2410-spi.0", "spi"),
+	ALIAS(PCLK_SDI, NULL, "sdi"),
+	ALIAS(HCLK_CFC, NULL, "cfc"),
+	ALIAS(ARMDIV, NULL, "armdiv"),
+};
+
+/* S3C2450 specific clocks */
+
+PNAME(s3c2450_cam_p) = { "div_cam", "hclk" };
+PNAME(s3c2450_hsspi1_p) = { "hsspi1_epll", "hsspi1_mpll" };
+PNAME(i2s1_p) = { "div_i2s1", "ext_i2s", "epllref", "epllref" };
+
+struct samsung_div_clock s3c2450_dividers[] __initdata = {
+	DIV(0, "div_cam", "esysclk", CLKDIV1, 26, 4),
+	DIV(0, "div_hsspi1_epll", "esysclk", CLKDIV2, 24, 2),
+	DIV(0, "div_hsspi1_mpll", "msysclk", CLKDIV2, 16, 4),
+	DIV(0, "div_i2s1", "esysclk", CLKDIV2, 12, 4),
+};
+
+struct samsung_mux_clock s3c2450_muxes[] __initdata = {
+	MUX(0, "mux_cam", s3c2450_cam_p, CLKSRC, 20, 1),
+	MUX(MUX_HSSPI1, "mux_hsspi1", s3c2450_hsspi1_p, CLKSRC, 19, 1),
+	MUX(0, "mux_i2s1", i2s1_p, CLKSRC, 12, 2),
+};
+
+struct samsung_gate_clock s3c2450_gates[] __initdata = {
+	GATE(SCLK_I2S1, "sclk_i2s1", "div_i2s1", SCLKCON, 5, 0, 0),
+	GATE(HCLK_CFC, "cfc", "hclk", HCLKCON, 17, 0, 0),
+	GATE(HCLK_CAM, "cam", "hclk", HCLKCON, 8, 0, 0),
+	GATE(HCLK_DMA7, "dma7", "hclk", HCLKCON, 7, CLK_IGNORE_UNUSED, 0),
+	GATE(HCLK_DMA6, "dma6", "hclk", HCLKCON, 6, CLK_IGNORE_UNUSED, 0),
+	GATE(PCLK_I2S1, "i2s1", "pclk", PCLKCON, 17, 0, 0),
+	GATE(PCLK_I2C1, "i2c1", "pclk", PCLKCON, 16, 0, 0),
+	GATE(PCLK_SPI1, "spi1", "pclk", PCLKCON, 14, 0, 0),
+};
+
+struct samsung_clock_alias s3c2450_aliases[] __initdata = {
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi"),
+	ALIAS(PCLK_SPI1, "s3c2443-spi.1", "spi_busclk0"),
+	ALIAS(MUX_HSSPI1, "s3c2443-spi.1", "spi_busclk2"),
+	ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"),
+};
+
+/*
+ * fixed rate clocks generated outside the soc
+ * Only necessary until the devicetree-move is complete
+ */
+struct samsung_fixed_rate_clock s3c2443_common_frate_clks[] __initdata = {
+	FRATE(0, "xti", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_i2s", NULL, CLK_IS_ROOT, 0),
+	FRATE(0, "ext_uart", NULL, CLK_IS_ROOT, 0),
+};
+
+static void __init s3c2443_common_clk_register_fixed_ext(unsigned long xti_f)
+{
+	s3c2443_common_frate_clks[0].fixed_rate = xti_f;
+	samsung_clk_register_fixed_rate(s3c2443_common_frate_clks,
+				ARRAY_SIZE(s3c2443_common_frate_clks));
+}
+
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base)
+{
+	if (np) {
+		reg_base = of_iomap(np, 0);
+		if (!reg_base)
+			panic("%s: failed to map registers\n", __func__);
+	}
+
+	samsung_clk_init(np, reg_base, NR_CLKS,
+		s3c2443_clk_regs, ARRAY_SIZE(s3c2443_clk_regs), NULL, 0);
+
+	/* Register external clocks only in non-dt cases */
+	if (!np)
+		s3c2443_common_clk_register_fixed_ext(xti_f);
+
+	/* Register PLLs. */
+	if (current_soc == S3C2416 || current_soc == S3C2450)
+		samsung_clk_register_pll(s3c2416_pll_clks,
+				ARRAY_SIZE(s3c2416_pll_clks), reg_base);
+	else
+		samsung_clk_register_pll(s3c2443_pll_clks,
+				ARRAY_SIZE(s3c2443_pll_clks), reg_base);
+
+	/* Register common internal clocks. */
+	samsung_clk_register_mux(s3c2443_common_muxes,
+			ARRAY_SIZE(s3c2443_common_muxes));
+	samsung_clk_register_div(s3c2443_common_dividers,
+			ARRAY_SIZE(s3c2443_common_dividers));
+	samsung_clk_register_gate(s3c2443_common_gates,
+		ARRAY_SIZE(s3c2443_common_gates));
+	samsung_clk_register_alias(s3c2443_common_aliases,
+		ARRAY_SIZE(s3c2443_common_aliases));
+
+	/* Register SoC-specific clocks. */
+	switch (current_soc) {
+	case S3C2450:
+		samsung_clk_register_div(s3c2450_dividers,
+				ARRAY_SIZE(s3c2450_dividers));
+		samsung_clk_register_mux(s3c2450_muxes,
+				ARRAY_SIZE(s3c2450_muxes));
+		samsung_clk_register_gate(s3c2450_gates,
+				ARRAY_SIZE(s3c2450_gates));
+		samsung_clk_register_alias(s3c2450_aliases,
+				ARRAY_SIZE(s3c2450_aliases));
+		/* fall through, as s3c2450 extends the s3c2416 clocks */
+	case S3C2416:
+		samsung_clk_register_div(s3c2416_dividers,
+				ARRAY_SIZE(s3c2416_dividers));
+		samsung_clk_register_mux(s3c2416_muxes,
+				ARRAY_SIZE(s3c2416_muxes));
+		samsung_clk_register_gate(s3c2416_gates,
+				ARRAY_SIZE(s3c2416_gates));
+		samsung_clk_register_alias(s3c2416_aliases,
+				ARRAY_SIZE(s3c2416_aliases));
+		break;
+	case S3C2443:
+		samsung_clk_register_div(s3c2443_dividers,
+				ARRAY_SIZE(s3c2443_dividers));
+		samsung_clk_register_gate(s3c2443_gates,
+				ARRAY_SIZE(s3c2443_gates));
+		samsung_clk_register_alias(s3c2443_aliases,
+				ARRAY_SIZE(s3c2443_aliases));
+		break;
+	}
+}
+
+static void __init s3c2416_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2416, 0);
+}
+CLK_OF_DECLARE(s3c2416_clk, "samsung,s3c2416-clock", s3c2416_clk_init);
+
+static void __init s3c2443_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2443, 0);
+}
+CLK_OF_DECLARE(s3c2443_clk, "samsung,s3c2443-clock", s3c2443_clk_init);
+
+static void __init s3c2450_clk_init(struct device_node *np)
+{
+	s3c2443_common_clk_init(np, 0, S3C2450, 0);
+}
+CLK_OF_DECLARE(s3c2450_clk, "samsung,s3c2450-clock", s3c2450_clk_init);
diff --git a/include/dt-bindings/clock/samsung,s3c2443-clock.h b/include/dt-bindings/clock/samsung,s3c2443-clock.h
new file mode 100644
index 0000000..37e66b0
--- /dev/null
+++ b/include/dt-bindings/clock/samsung,s3c2443-clock.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2443 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+#define MSYSCLK			1
+#define ESYSCLK			2
+#define ARMDIV			3
+#define ARMCLK			4
+#define HCLK			5
+#define PCLK			6
+
+/* Special clocks */
+#define SCLK_HSSPI0		16
+#define SCLK_FIMD		17
+#define SCLK_I2S0		18
+#define SCLK_I2S1		19
+#define SCLK_HSMMC1		20
+#define SCLK_HSMMC_EXT		21
+#define SCLK_CAM		22
+#define SCLK_UART		23
+#define SCLK_USBH		24
+
+/* Muxes */
+#define MUX_HSSPI0		32
+#define MUX_HSSPI1		33
+#define MUX_HSMMC0		34
+#define MUX_HSMMC1		35
+
+/* hclk-gates */
+#define HCLK_DMA0		48
+#define HCLK_DMA1		49
+#define HCLK_DMA2		50
+#define HCLK_DMA3		51
+#define HCLK_DMA4		52
+#define HCLK_DMA5		53
+#define HCLK_DMA6		54
+#define HCLK_DMA7		55
+#define HCLK_CAM		56
+#define HCLK_LCD		57
+#define HCLK_USBH		58
+#define HCLK_USBD		59
+#define HCLK_IROM		60
+#define HCLK_HSMMC0		61
+#define HCLK_HSMMC1		62
+#define HCLK_CFC		63
+#define HCLK_SSMC		64
+#define HCLK_DRAM		65
+#define HCLK_2D			66
+
+/* pclk-gates */
+#define PCLK_UART0		72
+#define PCLK_UART1		73
+#define PCLK_UART2		74
+#define PCLK_UART3		75
+#define PCLK_I2C0		76
+#define PCLK_SDI		77
+#define PCLK_SPI0		78
+#define PCLK_ADC		79
+#define PCLK_AC97		80
+#define PCLK_I2S0		81
+#define PCLK_PWM		82
+#define PCLK_WDT		83
+#define PCLK_RTC		84
+#define PCLK_GPIO		85
+#define PCLK_SPI1		86
+#define PCLK_CHIPID		87
+#define PCLK_I2C1		88
+#define PCLK_I2S1		89
+#define PCLK_PCM		90
+
+/* Total number of clocks. */
+#define NR_CLKS			(PCLK_PCM + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
-- 
1.7.10.4

[PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[Heiko Stübner]

This converts the mentioned platforms to use the newly introduced driver
for the common clock framework for them.

With this the whole legacy clock structure can go away too.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/s3c2416-smdk2416.dts  |    9 +
 arch/arm/boot/dts/s3c2416.dtsi          |   48 +++
 arch/arm/mach-s3c24xx/Kconfig           |   14 +-
 arch/arm/mach-s3c24xx/Makefile          |    5 +-
 arch/arm/mach-s3c24xx/clock-s3c2416.c   |  171 --------
 arch/arm/mach-s3c24xx/clock-s3c2443.c   |  212 ----------
 arch/arm/mach-s3c24xx/common-s3c2443.c  |  675 -------------------------------
 arch/arm/mach-s3c24xx/common.c          |   16 +-
 arch/arm/mach-s3c24xx/common.h          |    6 +
 arch/arm/mach-s3c24xx/mach-s3c2416-dt.c |   39 +-
 arch/arm/mach-s3c24xx/mach-smdk2416.c   |    9 +-
 arch/arm/mach-s3c24xx/mach-smdk2443.c   |    9 +-
 12 files changed, 98 insertions(+), 1115 deletions(-)
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
 delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
 delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c

diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 59594cf..fefb699 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,6 +19,15 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial at 50000000 {
 		status = "okay";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index e6555bd..4bde5a2 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/samsung,s3c2443-clock.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,59 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clocks: clock-controller at 0x4c000000 {
+			compatible = "samsung,s3c2416-clock";
+			reg = <0x4c000000 0x40>;
+			#clock-cells = <1>;
+		};
+	};
+
 	pinctrl at 56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer at 51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial at 50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial at 50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial at 50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial at 5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +89,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +100,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog at 53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc at 57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c at 54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 2eeeb55..f2fe2ad 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -50,9 +50,9 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
-	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
+	select COMMON_CLK
+	select S3C2443_COMMON_CLK
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -85,9 +85,9 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
+	select COMMON_CLK
+	select S3C2443_COMMON_CLK
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -664,12 +664,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
 config S3C2443_COMMON_CLK
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 7f54e5b..ba0e547 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
@@ -36,7 +36,7 @@ obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
@@ -53,7 +53,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
 #
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
deleted file mode 100644
index d421a72..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
deleted file mode 100644
index 76cd31f..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
deleted file mode 100644
index 65d3eef..0000000
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma.4",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma.5",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
-	.name		= "spi",
-	.devname	= "s3c2443-spi.0",
-	.parent		= &clk_p,
-	.enable		= s3c2443_clkcon_enable_p,
-	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-	&hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks@init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 4adaa4b..d87e432 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -145,7 +145,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32450003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
 		.init_uarts	= s3c2416_init_uarts,
 		.init		= s3c2416_init,
 		.name		= name_s3c2416,
@@ -154,7 +153,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
 		.init_uarts	= s3c2443_init_uarts,
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
@@ -535,3 +533,17 @@ struct platform_device s3c2443_device_dma = {
 	},
 };
 #endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2416)
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2443)
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index e46c104..d7323f1 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -114,4 +114,10 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index f50454a..0a86953 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -18,59 +18,23 @@
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/regs-serial.h>
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
-				"s3c2440-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
-				"s3c2440-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
-				"s3c2440-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
-				"s3c2440-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
-				"s3c-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
-				"s3c-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
-				"s3c2440-i2c.0", NULL),
-	{},
-};
-
 static void __init s3c2416_dt_map_io(void)
 {
 	s3c24xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
 }
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				s3c2416_auxdata_lookup, NULL);
-
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
@@ -86,6 +50,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	 .init_time	= clocksource_of_init,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f88e672..3ec6d49 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -218,10 +218,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c2443_device_dma,
 };
 
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2416_map_io(void)
 {
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -256,6 +261,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2416_init_time,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index d9933fc..58da97b 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2443_init_time,
 	.restart	= s3c2443_restart,
 MACHINE_END
-- 
1.7.10.4

[PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[Tomasz Figa]

Hi Heiko,

On Tuesday 03 of December 2013 16:24:11 Heiko St?bner wrote:
> This converts the mentioned platforms to use the newly introduced driver
> for the common clock framework for them.
> 
> With this the whole legacy clock structure can go away too.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm/boot/dts/s3c2416-smdk2416.dts  |    9 +
>  arch/arm/boot/dts/s3c2416.dtsi          |   48 +++
>  arch/arm/mach-s3c24xx/Kconfig           |   14 +-
>  arch/arm/mach-s3c24xx/Makefile          |    5 +-
>  arch/arm/mach-s3c24xx/clock-s3c2416.c   |  171 --------
>  arch/arm/mach-s3c24xx/clock-s3c2443.c   |  212 ----------
>  arch/arm/mach-s3c24xx/common-s3c2443.c  |  675 -------------------------------
>  arch/arm/mach-s3c24xx/common.c          |   16 +-
>  arch/arm/mach-s3c24xx/common.h          |    6 +
>  arch/arm/mach-s3c24xx/mach-s3c2416-dt.c |   39 +-
>  arch/arm/mach-s3c24xx/mach-smdk2416.c   |    9 +-
>  arch/arm/mach-s3c24xx/mach-smdk2443.c   |    9 +-
>  12 files changed, 98 insertions(+), 1115 deletions(-)
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
>  delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c

I would split this patch into one adding necessary definitions to DTS
files, then one migrating the platform to CCF. Until the driver gets
selected by respective Kconfig options, the entries in device tree should
not have any impact on the system, but you get rid of one patch doing
changes across two different trees.

Ideally this should be also done in one more step, allowing both clock
frameworks to coexist first and then removing the legacy code as the last
step to allow the new code to get more testing. However for this platform,
which isn't really very active nowadays, it might be fine to skip this.

> diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
> index 59594cf..fefb699 100644
> --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
> +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
> @@ -19,6 +19,15 @@
>  		reg =  <0x30000000 0x4000000>;
>  	};
>  
> +	clocks {
> +		xti: xti {
> +			compatible = "fixed-clock";
> +			clock-frequency = <12000000>;
> +			clock-output-names = "xti";
> +			#clock-cells = <0>;
> +		};
> +	};
> +
>  	serial at 50000000 {
>  		status = "okay";
>  		pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
> index e6555bd..4bde5a2 100644
> --- a/arch/arm/boot/dts/s3c2416.dtsi
> +++ b/arch/arm/boot/dts/s3c2416.dtsi
> @@ -8,6 +8,7 @@
>   * published by the Free Software Foundation.
>   */
>  
> +#include <dt-bindings/clock/samsung,s3c2443-clock.h>
>  #include "s3c24xx.dtsi"
>  #include "s3c2416-pinctrl.dtsi"
>  
> @@ -28,26 +29,59 @@
>  		compatible = "samsung,s3c2416-irq";
>  	};
>  
> +	clocks {

Don't you need compatible = "simple-bus" here for the subnodes to be
instantiated?

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		clocks: clock-controller at 0x4c000000 {

Why is this in a subnode? Clock controller is a part of the SoC, so IMHO
it should be on the same level as other peripherals.

> +			compatible = "samsung,s3c2416-clock";
> +			reg = <0x4c000000 0x40>;
> +			#clock-cells = <1>;
> +		};
> +	};
> +
[snip]
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 2eeeb55..f2fe2ad 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -50,9 +50,9 @@ config CPU_S3C2416
>  	select CPU_ARM926T
>  	select CPU_LLSERIAL_S3C2440
>  	select S3C2416_PM if PM
> -	select S3C2443_COMMON
>  	select S3C2443_DMA if S3C24XX_DMA
> -	select SAMSUNG_CLKSRC
> +	select COMMON_CLK
> +	select S3C2443_COMMON_CLK

Please keep selected symbols sorted alphabetically.

>  	help
>  	  Support for the S3C2416 SoC from the S3C24XX line
>  
> @@ -85,9 +85,9 @@ config CPU_S3C2443
>  	bool "SAMSUNG S3C2443"
>  	select CPU_ARM920T
>  	select CPU_LLSERIAL_S3C2440
> -	select S3C2443_COMMON
>  	select S3C2443_DMA if S3C24XX_DMA
> -	select SAMSUNG_CLKSRC
> +	select COMMON_CLK
> +	select S3C2443_COMMON_CLK

Ditto.

>  	help
>  	  Support for the S3C2443 SoC from the S3C24XX line
>  
> @@ -664,12 +664,6 @@ endif	# CPU_S3C2442
>  
>  if CPU_S3C2443 || CPU_S3C2416
>  
> -config S3C2443_COMMON
> -	bool
> -	help
> -	  Common code for the S3C2443 and similar processors, which includes
> -	  the S3C2416 and S3C2450.
> -
>  config S3C2443_COMMON_CLK
>  	bool
>  	help
[snip]
> diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
> index 4adaa4b..d87e432 100644
> --- a/arch/arm/mach-s3c24xx/common.c
> +++ b/arch/arm/mach-s3c24xx/common.c
> @@ -145,7 +145,6 @@ static struct cpu_table cpu_ids[] __initdata = {
>  		.idcode		= 0x32450003,
>  		.idmask		= 0xffffffff,
>  		.map_io		= s3c2416_map_io,
> -		.init_clocks	= s3c2416_init_clocks,
>  		.init_uarts	= s3c2416_init_uarts,
>  		.init		= s3c2416_init,
>  		.name		= name_s3c2416,
> @@ -154,7 +153,6 @@ static struct cpu_table cpu_ids[] __initdata = {
>  		.idcode		= 0x32443001,
>  		.idmask		= 0xffffffff,
>  		.map_io		= s3c2443_map_io,
> -		.init_clocks	= s3c2443_init_clocks,
>  		.init_uarts	= s3c2443_init_uarts,
>  		.init		= s3c2443_init,
>  		.name		= name_s3c2443,
> @@ -535,3 +533,17 @@ struct platform_device s3c2443_device_dma = {
>  	},
>  };
>  #endif
> +
> +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2416)

Isn't CONFIG_COMMON_CLK be selected by CPU_S3C2416?

> +void __init s3c2416_init_clocks(int xtal)
> +{
> +	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
> +}
> +#endif
> +
> +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2443)

Ditto.

> +void __init s3c2443_init_clocks(int xtal)
> +{
> +	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
> +}
> +#endif
> diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
> index e46c104..d7323f1 100644
> --- a/arch/arm/mach-s3c24xx/common.h
> +++ b/arch/arm/mach-s3c24xx/common.h
> @@ -114,4 +114,10 @@ extern struct platform_device s3c2412_device_dma;
>  extern struct platform_device s3c2440_device_dma;
>  extern struct platform_device s3c2443_device_dma;
>  
> +#ifdef CONFIG_S3C2443_COMMON_CLK
> +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
> +				    int current_soc,
> +				    void __iomem *reg_base);
> +#endif
> +
>  #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
> diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> index f50454a..0a86953 100644
> --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> @@ -18,59 +18,23 @@
>  #include <linux/clocksource.h>
>  #include <linux/irqchip.h>
>  #include <linux/of_platform.h>
> -#include <linux/serial_core.h>
>  
>  #include <asm/mach/arch.h>
>  #include <mach/map.h>
>  
>  #include <plat/cpu.h>
>  #include <plat/pm.h>
> -#include <plat/regs-serial.h>
>  
>  #include "common.h"
>  
> -/*
> - * The following lookup table is used to override device names when devices
> - * are registered from device tree. This is temporarily added to enable
> - * device tree support addition for the S3C2416 architecture.
> - *
> - * For drivers that require platform data to be provided from the machine
> - * file, a platform data pointer can also be supplied along with the
> - * devices names. Usually, the platform data elements that cannot be parsed
> - * from the device tree by the drivers (example: function pointers) are
> - * supplied. But it should be noted that this is a temporary mechanism and
> - * at some point, the drivers should be capable of parsing all the platform
> - * data from the device tree.
> - */
> -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
> -	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
> -				"s3c2440-uart.0", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
> -				"s3c2440-uart.1", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
> -				"s3c2440-uart.2", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
> -				"s3c2440-uart.3", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
> -				"s3c-sdhci.0", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
> -				"s3c-sdhci.1", NULL),
> -	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
> -				"s3c2440-i2c.0", NULL),
> -	{},
> -};
> -
>  static void __init s3c2416_dt_map_io(void)
>  {
>  	s3c24xx_init_io(NULL, 0);
> -	s3c24xx_init_clocks(12000000);
>  }
>  
>  static void __init s3c2416_dt_machine_init(void)
>  {
> -	of_platform_populate(NULL, of_default_bus_match_table,
> -				s3c2416_auxdata_lookup, NULL);
> -
> +	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
>  	s3c_pm_init();
>  }
>  
> @@ -86,6 +50,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
>  	.map_io		= s3c2416_dt_map_io,
>  	.init_irq	= irqchip_init,
>  	.init_machine	= s3c2416_dt_machine_init,
> -	 .init_time	= clocksource_of_init,

Should it really be a part of this patch?

Otherwise the patch looks fine.

Best regards,
Tomasz

[PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[Heiko Stübner]

Hi Tomasz,

Am Montag, 9. Dezember 2013, 18:19:16 schrieb Tomasz Figa:
> > diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> > b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index f50454a..0a86953 100644
> > --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
> > +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c

[...]

> > @@ -86,6 +50,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416
> > (Flattened Device Tree)")
> > 
> >  	.map_io		= s3c2416_dt_map_io,
> >  	.init_irq	= irqchip_init,
> >  	.init_machine	= s3c2416_dt_machine_init,
> > 
> > -	 .init_time	= clocksource_of_init,
> 
> Should it really be a part of this patch?

Yes it is needed as part of the conversion, as somebody has to call 
of_clk_init(), which the init_time default-handler does.

The only other option would be to introduce a new local init_time callback, 
calling of_clk_init and clocksource_of_init, only to remove it again in an 
additional patch.


Heiko

[PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework

[Tomasz Figa]

Hi Heiko,

On Tuesday 03 of December 2013 16:19:57 Heiko St?bner wrote:
> Resurrecting this series again after to much time.
> 
> Changed is the pll registration to follow the new system and getting the
> external clocks from dt fixed-rate clocks.
> 
> Hopefully I did address all comments received for v2 in july.
> 
> Tested on both non-dt and dt s3c2416. As s3c2443 is working the same way it
> should work, but is only compile tested.
> 
> Heiko Stuebner (5):
>   clk: samsung: add pll_6552 variant for s3c2416
>   clk: samsung: add plls used by the s3c2443
>   dt-bindings: add binding for clock-controller of s3c2443 and following
>   clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450
>   ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework
> 
>  .../bindings/clock/samsung,s3c2443-clock.txt       |   46 ++
>  arch/arm/boot/dts/s3c2416-smdk2416.dts             |    9 +
>  arch/arm/boot/dts/s3c2416.dtsi                     |   48 ++
>  arch/arm/mach-s3c24xx/Kconfig                      |   14 +-
>  arch/arm/mach-s3c24xx/Makefile                     |    5 +-
>  arch/arm/mach-s3c24xx/clock-s3c2416.c              |  171 -----
>  arch/arm/mach-s3c24xx/clock-s3c2443.c              |  212 ------
>  arch/arm/mach-s3c24xx/common-s3c2443.c             |  675 --------------------
>  arch/arm/mach-s3c24xx/common.c                     |   16 +-
>  arch/arm/mach-s3c24xx/common.h                     |    6 +
>  arch/arm/mach-s3c24xx/mach-s3c2416-dt.c            |   39 +-
>  arch/arm/mach-s3c24xx/mach-smdk2416.c              |    9 +-
>  arch/arm/mach-s3c24xx/mach-smdk2443.c              |    9 +-
>  drivers/clk/samsung/Makefile                       |    1 +
>  drivers/clk/samsung/clk-pll.c                      |   84 ++-
>  drivers/clk/samsung/clk-pll.h                      |    3 +
>  drivers/clk/samsung/clk-s3c2443.c                  |  417 ++++++++++++
>  include/dt-bindings/clock/samsung,s3c2443-clock.h  |   92 +++
>  18 files changed, 742 insertions(+), 1114 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2416.c
>  delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2443.c
>  delete mode 100644 arch/arm/mach-s3c24xx/common-s3c2443.c
>  create mode 100644 drivers/clk/samsung/clk-s3c2443.c
>  create mode 100644 include/dt-bindings/clock/samsung,s3c2443-clock.h

Thanks for you great work on S3C24xx.

Except for my (minor) comments on patches 3 and 5:

Acked-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz