linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] ARM: rockchip: set correct stabilization thresholds in suspend
Date: Thu, 23 Jul 2015 10:29:34 +0200	[thread overview]
Message-ID: <4610448.RXXf22Qoxl@diego> (raw)

Currently the stabilization thresholds for the oscillator and external pmu
are statically set to 30ms based on a 32kHz clock rate. This leaves out the
case when we don't switch to the 32kHz clock when only entering the shallow
suspend mode where the logic keeps running.

So, set the correct threshold after we have determined if we switch to the
32kHz clock or stay with the 24MHz one.

Reported-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
changes since v1:
- 24MHz oriented threshold is only needed in shallow suspend, the deep
  suspend always switches to 32kHz and only leaves the 24MHz oscillator
  running if needed for stuff like usb wakeup

 arch/arm/mach-rockchip/pm.c | 11 ++++++++---
 arch/arm/mach-rockchip/pm.h |  4 ----
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index 892bace..04d3028 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -145,6 +145,10 @@ static void rk3288_slp_mode_set(int level)
 
 		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
 			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
+
+		/* 30ms on a 32kHz clock for osc and pmic stabilization */
+		regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 32 * 30);
+		regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30);
 	} else {
 		/*
 		 * arm off, logic normal
@@ -152,6 +156,10 @@ static void rk3288_slp_mode_set(int level)
 		 * wakeup will be error
 		 */
 		mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
+
+		/* 30ms on a 24MHz clock for osc and pmic stabilization */
+		regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 24000 * 30);
+		regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30);
 	}
 
 	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
@@ -262,9 +270,6 @@ static int rk3288_suspend_init(struct device_node *np)
 	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
 	       rk3288_bootram_sz);
 
-	regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, OSC_STABL_CNT_THRESH);
-	regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, PMU_STABL_CNT_THRESH);
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index b6494c2..8a55ee2 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -62,10 +62,6 @@ static inline void rockchip_suspend_init(void)
 /* PMU_WAKEUP_CFG1 bits */
 #define PMU_ARMINT_WAKEUP_EN		BIT(0)
 
-/* wait 30ms for OSC stable and 30ms for pmic stable */
-#define OSC_STABL_CNT_THRESH	(32 * 30)
-#define PMU_STABL_CNT_THRESH	(32 * 30)
-
 enum rk3288_pwr_mode_con {
 	PMU_PWR_MODE_EN = 0,
 	PMU_CLK_CORE_SRC_GATE_EN,
-- 
2.1.4

             reply	other threads:[~2015-07-23  8:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-23  8:29 Heiko Stübner [this message]
2015-07-23  8:30 ` [PATCH v2 2/2] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend Heiko Stübner
2015-07-24 23:09 ` [PATCH v2 1/2] ARM: rockchip: set correct stabilization thresholds in suspend Heiko Stübner
2015-07-31  2:57   ` Chris Zhong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4610448.RXXf22Qoxl@diego \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).