From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 0/17] Add Analogix Core Display Port Driver
Date: Tue, 15 Dec 2015 01:06:30 +0100 [thread overview]
Message-ID: <4659407.pYb0RRCQQX@diego> (raw)
In-Reply-To: <1449470239-30667-1-git-send-email-ykk@rock-chips.com>
Hi Yakir,
Am Montag, 7. Dezember 2015, 14:37:19 schrieb Yakir Yang:
> The Samsung Exynos eDP controller and Rockchip RK3288 eDP controller
> share the same IP, so a lot of parts can be re-used. I split the common
> code into bridge directory, then rk3288 and exynos only need to keep
> some platform code. Cause I can't find the exact IP name of exynos dp
> controller, so I decide to name dp core driver with "analogix" which I
> find in rk3288 eDP TRM
so it looks like the hotplug works nicely now. I was able to test it
sucessfully on both a Jerry and a Minnie device without needing to force
hotplug :-) .
As I needed to adapt some patches when applying the lastest ones, I think it
would be good for a full send of the latest version as v11.
When going over the patches before sending, please also fix the indentation
issues in analogix_dp_core.h - both newly added elements to analogix_dp_device
use spaces between type and name, where the rest uses tabs.
[This should of course be fixed in the patches adding these lines :-) ]
Heiko
next prev parent reply other threads:[~2015-12-15 0:06 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-07 6:37 [PATCH v10 0/17] Add Analogix Core Display Port Driver Yakir Yang
2015-12-07 6:38 ` [PATCH v10 02/17] drm: bridge: analogix/dp: fix some obvious code style Yakir Yang
2015-12-07 6:38 ` [PATCH v10 03/17] drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count Yakir Yang
2015-12-07 6:38 ` [PATCH v10 04/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range Yakir Yang
2015-12-07 6:39 ` [PATCH v10 05/17] dt-bindings: add document for analogix display port driver Yakir Yang
2015-12-08 15:01 ` Rob Herring
2015-12-09 1:02 ` Yakir Yang
2015-12-07 6:39 ` [PATCH v10 06/17] ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver Yakir Yang
2015-12-07 6:39 ` [PATCH v10 07/17] drm: rockchip: dp: add rockchip platform dp driver Yakir Yang
2015-12-07 6:39 ` [PATCH v10 08/17] dt-bindings: add document for rockchip variant of analogix_dp Yakir Yang
2015-12-08 15:03 ` Rob Herring
2015-12-09 1:05 ` Yakir Yang
2015-12-07 6:39 ` [PATCH v10 09/17] phy: Add driver for rockchip Display Port PHY Yakir Yang
2015-12-07 6:39 ` [PATCH v10 10/17] dt-bindings: add document for rockchip dp phy Yakir Yang
2015-12-08 15:06 ` Rob Herring
2015-12-09 1:16 ` Yakir Yang
2015-12-07 6:40 ` [PATCH v10 11/17] drm: rockchip: vop: add bpc and color mode setting Yakir Yang
2015-12-07 6:40 ` [PATCH v10 12/17] drm: bridge: analogix/dp: add some rk3288 special registers setting Yakir Yang
2015-12-07 6:40 ` [PATCH v10 13/17] drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 Yakir Yang
2015-12-07 6:40 ` [PATCH v10 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-12-08 15:09 ` Rob Herring
2015-12-09 1:21 ` Yakir Yang
2015-12-07 6:40 ` [PATCH v10 15/17] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-12-07 6:40 ` [PATCH v10 16/17] drm: bridge: analogix/dp: add edid modes parse in get_modes method Yakir Yang
2015-12-07 6:41 ` [PATCH v10 17/17] drm: bridge: analogix/dp: expand the look time for waiting AUX CH reply Yakir Yang
[not found] ` <1449470312-30880-1-git-send-email-ykk@rock-chips.com>
2015-12-07 7:37 ` [PATCH v10 01/17] drm: bridge: analogix/dp: split exynos dp driver to bridge directory Yakir Yang
2015-12-08 15:33 ` [PATCH v10 0/17] Add Analogix Core Display Port Driver Heiko Stübner
[not found] ` <5667A4B6.4090708@rock-chips.com>
2015-12-09 14:51 ` Heiko Stübner
2015-12-09 2:06 ` [PATCH v10.1 05/17] dt-bindings: add document for analogix display port driver Yakir Yang
2015-12-09 2:07 ` [PATCH v10.1 08/17] dt-bindings: add document for rockchip variant of analogix_dp Yakir Yang
2015-12-09 2:07 ` [PATCH v10.1 10/17] dt-bindings: add document for rockchip dp phy Yakir Yang
2015-12-09 2:10 ` [PATCH v10.1 14/17] drm: bridge: analogix/dp: try force hpd after plug in lookup failed Yakir Yang
2015-12-09 4:25 ` Rob Herring
2015-12-09 5:55 ` Yakir Yang
2015-12-09 6:17 ` [PATCH v10.2 " Yakir Yang
2015-12-10 8:50 ` [PATCH v10.1 15/19] drm: bridge: analogix/dp: move hpd detect to connector detect function Yakir Yang
2015-12-10 8:52 ` [PATCH v10 18/19] drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time Yakir Yang
2015-12-10 8:55 ` [PATCH v10 19/19] drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time Yakir Yang
2015-12-15 0:06 ` Heiko Stübner [this message]
2015-12-16 0:50 ` [PATCH v10 0/17] Add Analogix Core Display Port Driver Yakir Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4659407.pYb0RRCQQX@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).