From mboxrd@z Thu Jan  1 00:00:00 1970
From: laurent.pinchart@ideasonboard.com (Laurent Pinchart)
Date: Sat, 09 Nov 2013 15:12:05 +0100
Subject: [PATCH 10/12] usb: r8a66597-hcd: Convert to clk_prepare/unprepare
In-Reply-To: <526F842E.1010607@renesas.com>
References: <1383000569-8916-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
 <1383000569-8916-11-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
 <526F842E.1010607@renesas.com>
Message-ID: <4726188.sxDyZ3Q5gt@avalon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi Greg,

On Tuesday 29 October 2013 18:47:26 Shimoda, Yoshihiro wrote:
> Hi Laurent-san,
> 
> (2013/10/29 7:49), Laurent Pinchart wrote:
> > Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
> > clk_disable_unprepare() to get ready for the migration to the common
> > clock framework.
> > 
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > Cc: linux-usb at vger.kernel.org
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> 
> Thank you for the patch.
> 
> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Could you please pick this patch up ?

> > ---
> > 
> >  drivers/usb/host/r8a66597-hcd.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/usb/host/r8a66597-hcd.c
> > b/drivers/usb/host/r8a66597-hcd.c index 2ad004a..a2fdd85 100644
> > --- a/drivers/usb/host/r8a66597-hcd.c
> > +++ b/drivers/usb/host/r8a66597-hcd.c
> > @@ -95,7 +95,7 @@ static int r8a66597_clock_enable(struct r8a66597
> > *r8a66597)> 
> >  	int i = 0;
> >  	
> >  	if (r8a66597->pdata->on_chip) {
> > 
> > -		clk_enable(r8a66597->clk);
> > +		clk_prepare_enable(r8a66597->clk);
> > 
> >  		do {
> >  		
> >  			r8a66597_write(r8a66597, SCKE, SYSCFG0);
> >  			tmp = r8a66597_read(r8a66597, SYSCFG0);
> > 
> > @@ -139,7 +139,7 @@ static void r8a66597_clock_disable(struct r8a66597
> > *r8a66597)> 
> >  	udelay(1);
> >  	
> >  	if (r8a66597->pdata->on_chip) {
> > 
> > -		clk_disable(r8a66597->clk);
> > +		clk_disable_unprepare(r8a66597->clk);
> > 
> >  	} else {
> >  	
> >  		r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
> >  		r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
-- 
Regards,

Laurent Pinchart