From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 0/3] clk: Add regmap support for clk mulitplexer
Date: Tue, 07 Jul 2015 12:37:40 +0200 [thread overview]
Message-ID: <4747793.LCMeNNmSbd@ubix> (raw)
In-Reply-To: <1434464615-9080-1-git-send-email-matthias.bgg@gmail.com>
On Tuesday, June 16, 2015 04:23:32 PM Matthias Brugger wrote:
> This patch set adds regmap support for the simple clock multiplexer,
> the divider clock and the clock gate.
> Regmap use, apart from a pointer to the regmap struct, needs an
> offset value to know where in the regmap it has to read/write.
> We add both fields to the corresponding structs.
>
> The driver will distinguish between a clock which is based on regmap or not
> through a flag specified in the clock hardware struct.
> The approach does not break the existing clock framework API but adds
> new functions for registering regmap clocks. Unregistering the clocks is
> independent of the use of regmap or not, so that no new functions were
> implemented.
>
> As an example user of the regmap clock multiplexer, it was implemented on
> the mt8135. When accepted it will also be applied to the other Mediatek
> SoCs. Other possible user are Qualcomm SoCs which up to now implement their
> own regmap based clock multiplexer.
>
> This patch set is based on linux next.
> To get the mt8135 eval board up and running, we need to enable the clock
> support [1] and use the two clocks for the uart port [2].
>
> Any comments welcome.
>
> [1] https://patchwork.kernel.org/patch/6261141/
> [2] https://patchwork.kernel.org/patch/6261151/
>
Hi Mike, hi Stephen,
Any comments on this patch set?
Regrads,
Matthias
> Changes for v4:
> - fix style issues
> - use __clk_get_flags
> - delete #ifdef CONFIG_REGMAP
>
> Changes for v3:
> - rebase against linux-next
> - provide regmap access to all three clock types in a unified way
>
> Changes for v2:
> - use regmap_update_bits instead of read-write
> - fix flag check
> - add union in struct clk_mux
> - fix typo in commit message
>
> ---
>
> Matthias Brugger (3):
> clk: Add regmap support
> clk: mediatek: Add support for clk-mux using regmap
> clk: mediatek: Use regmap clk-mux for mt8135
>
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-divider.c | 68 ++++++++++++++++++++++------
> drivers/clk/clk-gate.c | 57 +++++++++++++++++++-----
> drivers/clk/clk-io.c | 48 ++++++++++++++++++++
> drivers/clk/clk-io.h | 22 +++++++++
> drivers/clk/clk-mux.c | 94
> ++++++++++++++++++++++++++++++++------- drivers/clk/mediatek/clk-mt8135.c |
> 21 +++------
> drivers/clk/mediatek/clk-mtk.c | 37 +++++++++++++++
> drivers/clk/mediatek/clk-mtk.h | 26 +++++++++++
> include/linux/clk-provider.h | 54 ++++++++++++++++++++--
> 10 files changed, 370 insertions(+), 58 deletions(-)
> create mode 100644 drivers/clk/clk-io.c
> create mode 100644 drivers/clk/clk-io.h
prev parent reply other threads:[~2015-07-07 10:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 14:23 [PATCH v4 0/3] clk: Add regmap support for clk mulitplexer Matthias Brugger
2015-06-16 14:23 ` [PATCH v4 1/3] clk: Add regmap support Matthias Brugger
2015-06-19 16:01 ` Joachim Eastwood
2015-06-19 18:10 ` Heiko Stuebner
2015-06-16 14:23 ` [PATCH v4 2/3] clk: mediatek: Add support for clk-mux using regmap Matthias Brugger
2015-06-16 14:23 ` [PATCH v4 3/3] clk: mediatek: Use regmap clk-mux for mt8135 Matthias Brugger
2015-07-07 10:37 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4747793.LCMeNNmSbd@ubix \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).