From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: rentao.bupt@gmail.com, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Stephen Boyd <swboyd@chromium.org>,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org, taoren@fb.com
Subject: Re: [PATCH v2] usb: gadget: aspeed: improve vhub port irq handling
Date: Wed, 11 Mar 2020 12:31:22 +1100 [thread overview]
Message-ID: <481e9b7d40c51505518a34ddc2515d3200dbf158.camel@kernel.crashing.org> (raw)
In-Reply-To: <20200305234746.1002-1-rentao.bupt@gmail.com>
On Thu, 2020-03-05 at 15:47 -0800, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> This patch evaluates vhub ports' irq mask before going through per-port
> irq handling one by one, which helps to speed up irq handling in case
> there is no port interrupt.
>
> Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
> ---
> Changes in v2:
> - use "for_each_set_bit" to speed up port irq handling.
>
> drivers/usb/gadget/udc/aspeed-vhub/core.c | 11 ++++++++---
> drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 8 +++-----
> 2 files changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> index f8d35dd60c34..af2dbd405361 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
> @@ -134,11 +134,14 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
> }
>
> /* Handle device interrupts */
> - for (i = 0; i < vhub->max_ports; i++) {
> - u32 dev_mask = VHUB_IRQ_DEVICE1 << i;
> + if (istat & vhub->port_irq_mask) {
> + int offset = VHUB_IRQ_DEV1_BIT;
> + int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
>
> - if (istat & dev_mask)
> + for_each_set_bit_from(offset, (unsigned long *)&istat, size)
That type cast is very bad. It will not work on big endian for example
(yes this driver isn't used on big endian today but still).
Please assign istat to an unsigned long (or make it unsigned long to
begin with).
> + i = offset - VHUB_IRQ_DEV1_BIT;
> ast_vhub_dev_irq(&vhub->ports[i].dev);
> + }
> }
>
> /* Handle top-level vHub EP0 interrupts */
> @@ -332,6 +335,8 @@ static int ast_vhub_probe(struct platform_device *pdev)
>
> spin_lock_init(&vhub->lock);
> vhub->pdev = pdev;
> + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1,
> + VHUB_IRQ_DEV1_BIT);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> vhub->regs = devm_ioremap_resource(&pdev->dev, res);
> diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> index fac79ef6d669..23a1ac91f8d2 100644
> --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
> @@ -51,14 +51,11 @@
> #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0)
>
> /* IER & ISR */
> +#define VHUB_IRQ_DEV1_BIT 9
> #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18)
> #define VHUB_IRQ_EP_POOL_NAK (1 << 17)
> #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16)
> -#define VHUB_IRQ_DEVICE5 (1 << 13)
> -#define VHUB_IRQ_DEVICE4 (1 << 12)
> -#define VHUB_IRQ_DEVICE3 (1 << 11)
> -#define VHUB_IRQ_DEVICE2 (1 << 10)
> -#define VHUB_IRQ_DEVICE1 (1 << 9)
> +#define VHUB_IRQ_DEVICE1 (1 << (VHUB_IRQ_DEV1_BIT))
> #define VHUB_IRQ_BUS_RESUME (1 << 8)
> #define VHUB_IRQ_BUS_SUSPEND (1 << 7)
> #define VHUB_IRQ_BUS_RESET (1 << 6)
> @@ -402,6 +399,7 @@ struct ast_vhub {
> /* Per-port info */
> struct ast_vhub_port *ports;
> u32 max_ports;
> + u32 port_irq_mask;
>
> /* Generic EP data structures */
> struct ast_vhub_ep *epns;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-11 1:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 23:47 [PATCH v2] usb: gadget: aspeed: improve vhub port irq handling rentao.bupt
2020-03-11 1:31 ` Benjamin Herrenschmidt [this message]
2020-03-12 0:09 ` Tao Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481e9b7d40c51505518a34ddc2515d3200dbf158.camel@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=andrew@aj.id.au \
--cc=balbi@kernel.org \
--cc=chunfeng.yun@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=rentao.bupt@gmail.com \
--cc=swboyd@chromium.org \
--cc=taoren@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox