From: Heiko Stuebner <heiko@sntech.de>
To: arm@kernel.org
Cc: soc@kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Rockchip dts64 changes for 6.20 #2
Date: Mon, 26 Jan 2026 18:10:59 +0100 [thread overview]
Message-ID: <4851923.QJadu78ljV@diego> (raw)
Hi soc maintainers,
please find below and in the next mails some more Rockchip changes
for 6.20 .
Please pull.
Thanks
Heiko
The following changes since commit da0de806d8b46238ac3891a894806da4d1c26cdf:
arm64: dts: rockchip: Add the vdpu383 Video Decoder on rk3576 (2026-01-09 20:58:40 +0100)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git tags/v6.20-rockchip-dts64-2
for you to fetch changes up to 46c56b737161060dfa468f25ae699749047902a2:
arm64: dts: rockchip: Fix rk3588 PCIe range mappings (2026-01-22 19:41:40 +0100)
----------------------------------------------------------------
New boards: Anberic RG-DS game console, Radxa CM3J module + baseboard
for the Rpi CM4 IO board, QNAP TS133 from the RK3568 NAS series.
2 display outputs for the Lion board (old RK3368), TPS65185 pmic for the
PineNote and fixes for the PCIe ranges on both RK356x and RK3588.
These came quite late, so I wanted to give them the time till 6.20-rc1
and have them migrate to stable-kernels afterwards.
The rest is small stuff on a number of boards wrt gpios and compatibles.
----------------------------------------------------------------
Alexey Charkov (1):
arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576
Andreas Kemnade (1):
arm64: dts: rockchip: Add TPS65185 for PineNote
Chris Morgan (3):
dt-bindings: arm: rockchip: Add Anbernic RG-DS
dt-bindings: input: touchscreen: goodix: Add "panel" property
arm64: dts: rockchip: Add Anbernic RG-DS
FUKAUMI Naoki (4):
arm64: dts: rockchip: Make eeprom read-only for Radxa ROCK 3C/5A/5C
dt-bindings: arm: rockchip: Add Radxa CM3J on RPi CM4 IO Board
arm64: dts: rockchip: Add Radxa CM3J
arm64: dts: rockchip: Add Radxa CM3J on RPi CM4 IO Board
Heiko Stuebner (10):
arm64: dts: rockchip: Move SoC include to individual QNAP TSx33 boards
arm64: dts: rockchip: Fix the common combophy + SATA on QNAP TSx33 devices
arm64: dts: rockchip: Move copy-key to TSx33 board files
dt-bindings: arm: rockchip: add TS133 to RK356x-based QNAP NAS devices
arm64: dts: rockchip: Add TS133 variant of the QNAP NAS series
arm64: dts: rockchip: Use phandle for i2c_lvds_blc on rk3368-lion haikou
arm64: dts: rockchip: Add HDMI node to RK3368
arm64: dts: rockchip: Enable HDMI output on RK3368-Lion-Haikou
arm64: dts: rockchip: Enable pwm1 on rk3368-lion-haikou
arm64: dts: rockchip: Add the Video-Demo overlay for Lion Haikou
Jun Yan (1):
arm64: dts: rockchip: Do not enable hdmi_sound node on Pinebook Pro
Luis Garcia (1):
arm64: dts: rockchip: Fix imx258 variant on pinephone pro
Shawn Lin (4):
arm64: dts: rockchip: Fix SD card support for RK3576 EVB1
arm64: dts: rockchip: Fix SD card support for RK3576 Nanopi R76s
arm64: dts: rockchip: Fix rk356x PCIe range mappings
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
.../devicetree/bindings/arm/rockchip.yaml | 27 +-
.../bindings/input/touchscreen/goodix.yaml | 2 +
arch/arm64/boot/dts/rockchip/Makefile | 8 +
.../rockchip/rk3368-lion-haikou-video-demo.dtso | 170 +++
.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 38 +-
arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 5 +
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 43 +
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 -
.../boot/dts/rockchip/rk3399-pinephone-pro.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 49 +
arch/arm64/boot/dts/rockchip/rk3566-qnap-ts133.dts | 71 ++
arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 1 +
.../boot/dts/rockchip/rk3568-anbernic-rg-ds.dts | 1237 ++++++++++++++++++++
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts | 18 +-
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 18 +-
.../arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi | 21 +-
.../dts/rockchip/rk3568-radxa-cm3j-rpi-cm4.dts | 204 ++++
.../arm64/boot/dts/rockchip/rk3568-radxa-cm3j.dtsi | 558 +++++++++
arch/arm64/boot/dts/rockchip/rk3568.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts | 22 +
.../arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts | 23 +-
arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi | 7 +
arch/arm64/boot/dts/rockchip/rk3576.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 4 +-
arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi | 6 +-
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3588s-rock-5c.dts | 1 +
28 files changed, 2498 insertions(+), 50 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lion-haikou-video-demo.dtso
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-qnap-ts133.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-anbernic-rg-ds.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3j-rpi-cm4.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3j.dtsi
reply other threads:[~2026-01-26 17:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4851923.QJadu78ljV@diego \
--to=heiko@sntech.de \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox