From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Chen-Yu Tsai <wens@csie.org>,
Samuel Holland <samuel@sholland.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Nick Alilovic <nickalilovic@gmail.com>
Subject: Re: [PATCH v2 2/2] arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes
Date: Fri, 09 Feb 2024 13:22:36 +0100 [thread overview]
Message-ID: <4894722.31r3eYUQgx@jernej-laptop> (raw)
In-Reply-To: <20240209115759.3582869-3-andre.przywara@arm.com>
Dne petek, 09. februar 2024 ob 12:57:59 CET je Andre Przywara napisal(a):
> In contrast to other devices using Allwinner SoCs, the Transpeed 8K618-T
> TV box uses a mainline supported WiFi chip: it's Broadcom 4335 compatible,
> packaged by Murata.
>
> Add the required DT nodes to let DT users know about the SDIO device.
> There is an otherwise empty MMC device node, to receive the MAC address,
> that firmware might want to write in there.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> .../sun50i-h618-transpeed-8k618-t.dts | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> index 8ea1fd41aebaa..7ec4098e707bf 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
> @@ -16,6 +16,7 @@ / {
>
> aliases {
> serial0 = &uart0;
> + ethernet1 = &sdio_wifi;
Ah, this is not sorted alphabetically. I can fix this while applying.
Best regards,
Jernej
> };
>
> chosen {
> @@ -39,6 +40,15 @@ reg_vcc3v3: vcc3v3 {
> regulator-max-microvolt = <3300000>;
> regulator-always-on;
> };
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rtc CLK_OSC32K_FANOUT>;
> + clock-names = "ext_clock";
> + pinctrl-0 = <&x32clk_fanout_pin>;
> + pinctrl-names = "default";
> + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
> + };
> };
>
> &ehci0 {
> @@ -60,6 +70,19 @@ &mmc0 {
> status = "okay";
> };
>
> +&mmc1 {
> + vmmc-supply = <®_dldo1>;
> + vqmmc-supply = <®_aldo1>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +
> + sdio_wifi: wifi@1 {
> + reg = <1>;
> + };
> +};
> +
> &mmc2 {
> vmmc-supply = <®_dldo1>;
> vqmmc-supply = <®_aldo1>;
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-09 12:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-09 11:57 [PATCH v2 0/2] arm64: dts: allwinner: Add Transpeed WiFi nodes Andre Przywara
2024-02-09 11:57 ` [PATCH v2 1/2] arm64: dts: allwinner: h616: Add 32K fanout pin Andre Przywara
2024-02-09 12:21 ` Jernej Škrabec
2024-02-09 11:57 ` [PATCH v2 2/2] arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes Andre Przywara
2024-02-09 12:21 ` Jernej Škrabec
2024-02-09 12:22 ` Jernej Škrabec [this message]
2024-02-11 20:16 ` [PATCH v2 0/2] arm64: dts: allwinner: Add Transpeed " Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4894722.31r3eYUQgx@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=nickalilovic@gmail.com \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox