[PATCH 1/3] ARM: dts: exynos4210: Add LCD related pinctrl entries

[tomasz.figa@gmail.com (Tomasz Figa)]

Hi Tushar, Sachin,

On Friday 07 of June 2013 16:37:13 Tushar Behera wrote:
> From: Sachin Kamat <sachin.kamat@linaro.org>
> 
> Adds pinctrl entries required by FIMD.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
> ---
>  arch/arm/boot/dts/exynos4210-pinctrl.dtsi |   75
> +++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 55a2efb..d241726
> 100644
> --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
> @@ -330,6 +330,81 @@
>  			samsung,pin-pud = <3>;
>  			samsung,pin-drv = <0>;
>  		};
> +
> +		pwm0_out: pwm0-out {
> +			samsung,pins = "gpd0-0";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		pwm1_out: pwm1-out {
> +			samsung,pins = "gpd0-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};

Hmm, these two seem to be unrelated. Rebase error? :)

> +		lcd_ctrl: lcd-ctrl {
> +			samsung,pins = "gpd0-0", "gpd0-1";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_sync: lcd-sync {
> +			samsung,pins = "gpf0-0", "gpf0-1";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_en: lcd-en {
> +			samsung,pins = "gpe3-4";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_clk: lcd-clk {
> +			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", 
"gpf0-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_data16: lcd-data-width16 {
> +			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", 
"gpf1-2",
> +					"gpf1-3", "gpf1-6", "gpf1-7", 
"gpf2-0",
> +					"gpf2-1", "gpf2-2", "gpf2-3", 
"gpf2-7",
> +					"gpf3-0", "gpf3-1", "gpf3-2", 
"gpf3-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_data18: lcd-data-width18 {
> +			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", 
"gpf1-1",
> +					"gpf1-2", "gpf1-3", "gpf1-6", 
"gpf1-7",
> +					"gpf2-0", "gpf2-1", "gpf2-2", 
"gpf2-3",
> +					"gpf2-6", "gpf2-7", "gpf3-0", 
"gpf3-1",
> +					"gpf3-2", "gpf3-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		lcd_data24: lcd-data-width24 {
> +			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", 
"gpf0-7",
> +					"gpf1-0", "gpf1-1", "gpf1-2", 
"gpf1-3",
> +					"gpf1-4", "gpf1-5", "gpf1-6", 
"gpf1-7",
> +					"gpf2-0", "gpf2-1", "gpf2-2", 
"gpf2-3",
> +					"gpf2-4", "gpf2-5", "gpf2-6", 
"gpf2-7",
> +					"gpf3-0", "gpf3-1", "gpf3-2", 
"gpf3-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
>  	};
> 
>  	pinctrl at 11000000 {

Otherwise looks good to me.

Best regards,
Tomasz