From mboxrd@z Thu Jan  1 00:00:00 1970
From: r.sricharan@ti.com (Sricharan R)
Date: Thu, 10 Mar 2011 09:56:20 +0530
Subject: [PATCH] omap2+: mux: Add macro for configuring static with
	omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE
	flag)
In-Reply-To: <20110309203200.GP26463@atomide.com>
References: <1299472552-22017-1-git-send-email-r.sricharan@ti.com>
	<20110308164033.GC26463@atomide.com>
	<b76e32aff88265d31cc1b7b2fc502a32@mail.gmail.com>
	<20110309203200.GP26463@atomide.com>
Message-ID: <48ce1c025ceaf65d610ce5eaa6ea99e4@mail.gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Tony,
>-----Original Message-----
>From: Tony Lindgren [mailto:tony at atomide.com]
>Sent: Thursday, March 10, 2011 2:02 AM
>To: Sricharan R
>Cc: linux-omap at vger.kernel.org; Benoit Cousson; Santosh Shilimkar;
>paul at pswan.com; linux-arm-kernel at lists.infradead.org
>Subject: [PATCH] omap2+: mux: Add macro for configuring static with
>omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE
flag)
>
>* Sricharan R <r.sricharan@ti.com> [110309 03:47]:
>>
>> Btw,I have fixed the comments on the below patches that
>> I sent for configuring the serial pads.
>>
>> 4430sdp:
>> http://marc.info/?l=linux-omap&m=129900334420003&w=2
>>
>> omap4panda:
>> http://marc.info/?l=linux-omap&m=129900338520082&w=2
>>
>> 3430sdp:
>> http://marc.info/?l=linux-omap&m=129619117726479&w=2
>>
>> Can you please check if they are ok?
>
>Look OK to me, but let's make things a bit easier to read
>and maintain with the following patch. Can you please
>update your patches to use this macro?
>
>Each line then just becomes something like:
>
>OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
>		OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
>
Ok thanks. I will update and send again.
>Regards,
>
>Tony
>
>
>From: Tony Lindgren <tony@atomide.com>
>Date: Wed, 9 Mar 2011 12:14:04 -0800
>Subject: [PATCH] omap2+: mux: Add macro for configuring static with
>omap_hwmod_mux_init
>
>Add macro for defining static pins in the board file.
>
>We can now start implementing pin multiplexing in the platform init
>code for devices that call omap_hwmod_mux_init. Currently that is
>only implemented for serial.c.
>
>Signed-off-by: Tony Lindgren <tony@atomide.com>
>
>--- a/arch/arm/mach-omap2/mux.h
>+++ b/arch/arm/mach-omap2/mux.h
>@@ -186,6 +186,12 @@ struct omap_device_pad {
>
> struct omap_hwmod_mux_info;
>
>+#define OMAP_MUX_STATIC(signal, mode)					\
>+{									\
>+	.name	= (signal),						\
>+	.enable	= (mode),						\
>+}
>+
> #if defined(CONFIG_OMAP_MUX)
>
> /**