From mboxrd@z Thu Jan  1 00:00:00 1970
From: smunnings@gabaedevelopment.com (Stephen Munnings)
Date: Mon, 31 Aug 2009 15:13:01 -0400
Subject: AT91SAM9260: How to output PCK0 clock on a GPIO pin
In-Reply-To: <8af7bfc16c944615552acda12c469e9f@colcan.ca>
References: <fb43ffa34296dae697dbadb98e53bdc1@colcan.ca>
	<4A9C0136.3080102@gabaedevelopment.com>
	<bb8f28f395b9416e1c2b1877be6f3baf@colcan.ca>
	<4A9C1A03.2050908@gabaedevelopment.com>
	<8af7bfc16c944615552acda12c469e9f@colcan.ca>
Message-ID: <4A9C20BD.1050707@gabaedevelopment.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Pedro I. Sanchez wrote:
> I presume I don't need any to modprobe any of these available gpio modules.
> Certainly the gpio user space interface via /sys/class/gpio works well.
>
> Any other suggestions?
>
> Thanks,
>
>   

No, sorry.
I have run out of suggestions that I can make remotely.
This is when I haul out the debugger, or otherwise start digging deep 
into what is not working here.
Can't really do that for you, sorry.    :)

Good Luck