From mboxrd@z Thu Jan  1 00:00:00 1970
From: yegor_sub1@visionsystems.de (Yegor Yefremov)
Date: Mon, 28 Sep 2009 12:34:46 +0200
Subject: [at91sam9g45] DMA driver for AC97 and MCI
In-Reply-To: <4ABCE36F.1000205@atmel.com>
References: <4ABCBD32.7080408@visionsystems.de> <4ABCE36F.1000205@atmel.com>
Message-ID: <4AC09146.4000608@visionsystems.de>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

>> I try to get sound and SD card working on at91sam9g45-ekes development
>> board using linux-next tree. As far as I understand AT_HDMAC is the
>> appropriate DMA driver for ARCH_AT91SAM9G45.
> 
> Correct.
> 
>> I resolved dependencies with this patch, so I could activate it for
>> my platform.
>>
>> --- a/drivers/dma/Kconfig
>> +++ b/drivers/dma/Kconfig
>> @@ -48,7 +48,7 @@ config DW_DMAC
>>
>>  config AT_HDMAC
>>         tristate "Atmel AHB DMA support"
>> -       depends on ARCH_AT91SAM9RL
>> +       depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
>>         select DMA_ENGINE
>>         help
>>           Support the Atmel AHB DMA controller.  This can be integrated in
> 
> Well, this patch was waiting for this other to reach mainline:
> http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5621/1
> 
> It is true that you will need it.
> 
>> Should this driver be also used for sound driver and MCI?
> 
> Sure. For sound, maybe we will have to conform to the dma cyclic API
> introduced by dw_dmac driver.
> 
> For MCI, here is a patch series that goes before the patch that will do
> the link between atmel_mci, at_hdmac and at91sam9g45.
> 
> http://lkml.org/lkml/2009/9/17/224
> 
> This last patch is not posted to the mailing list yet, I am waiting for
> the others to reach mainline.
> 
> I you are interested in it, you can have a preview here:
> ftp://ftp.linux4sam.org/devel/linux/2630_lnx4sam_patchset-tmp_20090828.tgz
> patch named :
> "at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and
> board" aka:
> 2630_lnx4sam_patchset-tmp/2.6.30-at91-exp-0033-at91-atmel-mci-inclusion-of-sd-mmc-driver-in-at91sa.patch

Thanks for the patches. I could get the stuff working. I applied 

2.6.30-at91-exp-0031-atmel-mci-change-use-of-dma-slave-interface.patch
2.6.30-at91-exp-0032-mmc-atmel-mci-New-MCI2-module-support-in-atmel-mci.patch
2.6.30-at91-exp-0033-at91-atmel-mci-inclusion-of-sd-mmc-driver-in-at91sa.patch

to Linus tree (2.6.32-rc2)

As to 2.6.30-at91-exp-0033-at91-atmel-mci-inclusion-of-sd-mmc-driver-in-at91sa.patch I've only changed
DW_DMA_SLAVE_WIDTH_32BIT to AT_DMA_SLAVE_WIDTH_32BIT

I couldn't apply 2.6.30-at91-exp-0032-mmc-atmel-mci-New-MCI2-module-support-in-atmel-mci.patch with quilt at once, so I had to make it manually. Here is applicable version: