From: yegor_sub1@visionsystems.de (Yegor Yefremov)
To: linux-arm-kernel@lists.infradead.org
Subject: [at91sam9g45] touch screen not detected by Angstrom Linux
Date: Wed, 30 Sep 2009 11:06:07 +0200 [thread overview]
Message-ID: <4AC31F7F.6090001@visionsystems.de> (raw)
Hello Nicolas,
I could successfully apply your touch screen drivers to 2.6.32-rc2:
2.6.30-at91-exp-0045-input-atmel_tsadcc-touchscreen-use-platform-paramet.patch
2.6.30-at91-exp-0046-at91-input-platform-parameters-for-atmel_tsadcc-in.patch
2.6.30-at91-exp-0047-at91-input-touchscreen-support-for-at91sam9g45ekes.patch
Here dmesg output for 2.6.32-rc2:
atmel_tsadcc atmel_tsadcc: Master clock is set at: 133333333 Hz
atmel_tsadcc atmel_tsadcc: Prescaler is set at: 221
input: atmel touch screen controller as /devices/platform/atmel_tsadcc/input/input1
Here dmesg output for 2.6.27 where touch screen is working under Angstrom Linux:
atmel_tsadcc atmel_tsadcc: Master clock is set at: 133333333 Hz
atmel_tsadcc atmel_tsadcc: Prescaler is set at: 221
input: atmel touch screen controller as /class/input/input1
The device is working if I read /dev/input/event1, but I'm not able to get it working under Angstrom Linux. Any ideas?
Regards,
Yegor
next reply other threads:[~2009-09-30 9:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-30 9:06 Yegor Yefremov [this message]
2009-09-30 9:50 ` [at91sam9g45] touch screen not detected by Angstrom Linux Nicolas Ferre
2009-10-01 8:36 ` Yegor Yefremov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AC31F7F.6090001@visionsystems.de \
--to=yegor_sub1@visionsystems.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).