From mboxrd@z Thu Jan 1 00:00:00 1970 From: mike@compulab.co.il (Mike Rapoport) Date: Thu, 15 Oct 2009 10:11:09 +0200 Subject: [PATCH] [ARM] pxa/cm-x300: fix mmc numbering (was >From d91f4e6f60747) In-Reply-To: <1255593996-5545-1-git-send-email-mike@compulab.co.il> References: <1255593996-5545-1-git-send-email-mike@compulab.co.il> Message-ID: <4AD6D91D.2050703@compulab.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Eric, Please discard the previous e-mail. Sorry for the noise... It would be really nice if it can go to 2.6.32 --- CM-X300 has libertas on mmc2 and SD card slot on mmc1. This patch fixes wrong MMC ports assignment. Signed-off-by: Igor Grinberg Signed-off-by: Mike Rapoport --- arch/arm/mach-pxa/cm-x300.c | 38 +++++++++++++++++++------------------- 1 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 52f6ad7..e6fbb0a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -53,10 +53,10 @@ #define CM_X300_ETH_PHYS 0x08000010 -#define GPIO82_MMC2_IRQ (82) -#define GPIO85_MMC2_WP (85) +#define GPIO82_MMC_IRQ (82) +#define GPIO85_MMC_WP (85) -#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -430,37 +430,37 @@ static inline void cm_x300_init_nand(void) {} #endif #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -/* The first MMC slot of CM-X300 is hardwired to Libertas card and has +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = GPIO82_MMC_IRQ, + .gpio_card_ro = GPIO85_MMC_WP, + .gpio_power = -1, +}; + +/* The second MMC slot of CM-X300 is hardwired to Libertas card and has no detection/ro pins */ -static int cm_x300_mci_init(struct device *dev, - irq_handler_t cm_x300_detect_int, - void *data) +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) { return 0; } -static void cm_x300_mci_exit(struct device *dev, void *data) +static void cm_x300_mci2_exit(struct device *dev, void *data) { } -static struct pxamci_platform_data cm_x300_mci_platform_data = { +static struct pxamci_platform_data cm_x300_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = cm_x300_mci_init, - .exit = cm_x300_mci_exit, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, }; -static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = GPIO82_MMC2_IRQ, - .gpio_card_ro = GPIO85_MMC2_WP, - .gpio_power = -1, -}; - static void __init cm_x300_init_mmc(void) { pxa_set_mci_info(&cm_x300_mci_platform_data); -- 1.6.0.6 -- Sincerely yours, Mike.