linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/6 v2] OMAP4: Fix cpu detection
Date: Thu, 10 Dec 2009 14:14:46 -0600	[thread overview]
Message-ID: <4B2156B6.8090403@ti.com> (raw)
In-Reply-To: <1260426156-1820-1-git-send-email-santosh.shilimkar@ti.com>

Shilimkar, Santosh had written, on 12/10/2009 12:22 AM, the following:
> This patch fixes the OMAP4430 cpu detection. The IC rev detection is
> done with hawkeye and rev. Note that rev does not map directly to
> defined processor revision numbers as ES1.0 uses value 0.It also fixes
> the SCM base address to read the correct ID_CODE register.
> 
> Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated
> instead of always being true
> 
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> ---
>  arch/arm/mach-omap2/id.c              |   27 ++++++++++++++++++++++++++-
>  arch/arm/plat-omap/common.c           |    2 +-
>  arch/arm/plat-omap/include/plat/cpu.h |    9 ++++++---
>  3 files changed, 33 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
> index f48a4b2..3641ba0 100644
> --- a/arch/arm/mach-omap2/id.c
> +++ b/arch/arm/mach-omap2/id.c
> @@ -246,6 +246,31 @@ void __init omap3_check_revision(void)
>  	}
>  }
>  
> +void __init omap4_check_revision(void)
> +{
> +	u32 idcode;
> +	u16 hawkeye;
> +	u8 rev;
> +	char *rev_name = "ES1.0";
should'nt you decide this inside the rev check path?

> +
> +	/*
> +	 * The IC rev detection is done with hawkeye and rev.
> +	 * Note that rev does not map directly to defined processor
> +	 * revision numbers as ES1.0 uses value 0.
> +	 */
> +	idcode = read_tap_reg(OMAP_TAP_IDCODE);
> +	hawkeye = (idcode >> 12) & 0xffff;
> +	rev = (idcode >> 28) & 0xff;
> +
> +	if ((hawkeye == 0xb852) && (rev == 0x0)) {
> +		omap_revision = OMAP4430_REV_ES1_0;
> +		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
wondering about the >>16 part.

> +		return;
> +	}
> +
> +	pr_err("Unknown OMAP4 CPU id\n");
> +}
> +
>  #define OMAP3_SHOW_FEATURE(feat)		\
>  	if (omap3_has_ ##feat())		\
>  		printk(#feat" ");
> @@ -336,7 +361,7 @@ void __init omap2_check_revision(void)
>  		omap3_check_features();
>  		omap3_cpuinfo();
>  	} else if (cpu_is_omap44xx()) {
> -		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
> +		omap4_check_revision();
>  		return;
>  	} else {
>  		pr_err("OMAP revision unknown, please fix!\n");
> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
> index cc050b3..3473a80 100644
> --- a/arch/arm/plat-omap/common.c
> +++ b/arch/arm/plat-omap/common.c
> @@ -280,7 +280,7 @@ void __init omap2_set_globals_343x(void)
>  #if defined(CONFIG_ARCH_OMAP4)
>  static struct omap_globals omap4_globals = {
>  	.class	= OMAP443X_CLASS,
> -	.tap	= OMAP2_L4_IO_ADDRESS(0x4830a000),
> +	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
>  	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
>  	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
>  	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
> diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
> index 2e17890..9359785 100644
> --- a/arch/arm/plat-omap/include/plat/cpu.h
> +++ b/arch/arm/plat-omap/include/plat/cpu.h
> @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15)
>  IS_OMAP_CLASS(16xx, 0x16)
>  IS_OMAP_CLASS(24xx, 0x24)
>  IS_OMAP_CLASS(34xx, 0x34)
> +IS_OMAP_CLASS(44xx, 0x44)
>  
>  IS_OMAP_SUBCLASS(242x, 0x242)
>  IS_OMAP_SUBCLASS(243x, 0x243)
>  IS_OMAP_SUBCLASS(343x, 0x343)
>  IS_OMAP_SUBCLASS(363x, 0x363)
> +IS_OMAP_SUBCLASS(443x, 0x443)
>  
>  #define cpu_is_omap7xx()		0
>  #define cpu_is_omap15xx()		0
> @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517)
>  # if defined(CONFIG_ARCH_OMAP4)
>  # undef cpu_is_omap44xx
>  # undef cpu_is_omap443x
> -# define cpu_is_omap44xx()		1
> -# define cpu_is_omap443x()		1
> +# define cpu_is_omap44xx()		is_omap44xx()
> +# define cpu_is_omap443x()		is_omap443x()
>  # endif
>  
>  /* Macros to detect if we have OMAP1 or OMAP2 */
> @@ -443,7 +445,8 @@ IS_OMAP_TYPE(3517, 0x3517)
>  #define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 12))
>  #define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 12))
>  
> -#define OMAP443X_CLASS		0x44300034
> +#define OMAP443X_CLASS		0x44300044
> +#define OMAP4430_REV_ES1_0	0x44300044
>  
>  /*
>   * omap_chip bits
neat.. thanks..

-- 
Regards,
Nishanth Menon

  parent reply	other threads:[~2009-12-10 20:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-10  6:22 [PATCH 1/6 v2] OMAP4: Fix cpu detection Santosh Shilimkar
2009-12-10  6:22 ` [PATCH 6/6 v2] OMAP4: Sync up omap4430 defconfig Santosh Shilimkar
2009-12-10 20:14 ` Nishanth Menon [this message]
2009-12-11  4:43   ` [PATCH 1/6 v2] OMAP4: Fix cpu detection Shilimkar, Santosh
2009-12-11 16:37     ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B2156B6.8090403@ti.com \
    --to=nm@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).