linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jason77.wang@gmail.com (jason)
To: linux-arm-kernel@lists.infradead.org
Subject: [V2 1/3] mxc: Add support for the imx51 3-stack board
Date: Thu, 03 Jun 2010 22:39:42 +0800	[thread overview]
Message-ID: <4C07BEAE.7020205@gmail.com> (raw)
In-Reply-To: <20100603123908.GB3527@matterhorn.lan>

Amit Kucheria wrote:
> Two comments inline.
>
> On 10 Jun 03, Jason Wang wrote:
>   
>> 3-stack is a reference board from Freescale for their i.MX51 SoC.
>>
>> Add board definition, Kconfig and Makefile to enable Freescale 3-stack
>> board.
>>
>> Boot tested on a i.MX51 3-stack Rev2.0 board
>>
>> Signed-off-by: Jason Wang <jason77.wang@gmail.com>
>> ---
>>  arch/arm/mach-mx5/Kconfig                       |    5 +
>>  arch/arm/mach-mx5/Makefile                      |    2 +-
>>  arch/arm/mach-mx5/board-mx51_3ds.c              |  263 +++++++++++++++++++++++
>>  arch/arm/plat-mxc/include/mach/board-mx51_3ds.h |   70 ++++++
>>  arch/arm/plat-mxc/include/mach/iomux-mx51.h     |   10 +-
>>  5 files changed, 345 insertions(+), 5 deletions(-)
>>  create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c
>>  create mode 100644 arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>>
>>     
>>     
<snip>
>> diff --git a/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>> new file mode 100644
>> index 0000000..035f7bc
>> --- /dev/null
>> +++ b/arch/arm/plat-mxc/include/mach/board-mx51_3ds.h
>> @@ -0,0 +1,70 @@
>> +/*
>> + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
>> + *
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#ifndef __ASM_ARCH_MXC_BOARD_MX51_3DS_H__
>> +#define __ASM_ARCH_MXC_BOARD_MX51_3DS_H__
>> +
>> +/*
>> + * @file plat-mxc/include/mach/board-mx51_3ds.h
>> + *
>> + * @brief This file contains all the board level configuration options.
>>     
>
> Remove this @file, @brief.
>
>   
OK, i will fix it in V3.

Thanks,
Jason.
>> + * It currently hold the options defined for MX51 3Stack Platform.
>> + *
>> + */
>> +
>> +#define DEBUG_BOARD_BASE_ADDRESS MX51_CS5_BASE_ADDR
>>     
>
<snip>

  parent reply	other threads:[~2010-06-03 14:39 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-03 12:05 [V2 0/3]Add i.MX51 3-stack board support Jason Wang
2010-06-03 12:05 ` [V2 1/3] mxc: Add support for the imx51 3-stack board Jason Wang
2010-06-03 12:05   ` [V2 2/3] mxc/iomux: add GPIO bank offset for iomux v3 platforms Jason Wang
2010-06-03 12:05     ` [V2 3/3] mx51/keypad: add keypad support for i.MX51 platforms Jason Wang
2010-06-05  9:35       ` Alberto Panizzo
2010-06-05 14:13         ` jason
2010-06-06 18:11           ` Alberto Panizzo
2010-06-07 23:22             ` jason
2010-06-03 12:39   ` [V2 1/3] mxc: Add support for the imx51 3-stack board Amit Kucheria
2010-06-03 13:57     ` Sascha Hauer
2010-06-03 14:35       ` Amit Kucheria
2010-06-03 14:36       ` jason
2010-06-03 14:39     ` jason [this message]
2010-06-04  8:53   ` Sascha Hauer
2010-06-04  9:48     ` Alberto Panizzo
2010-06-04 15:22       ` Sascha Hauer
2010-06-04 10:53     ` Amit Kucheria
2010-06-04 14:09       ` [PATCH] mxc: Fix pad names for imx51 Amit Kucheria
2010-06-07 20:41         ` Troy Kisky
2010-06-07 21:04           ` Amit Kucheria
2010-06-07 21:15             ` Troy Kisky
2010-06-08  6:30               ` Sascha Hauer
2010-06-09 13:09                 ` Amit Kucheria
2010-06-10 11:49                   ` Sascha Hauer
2010-06-10 13:04                     ` jason
2010-06-10 13:59                       ` Sascha Hauer
2010-06-10 19:24                     ` Amit Kucheria
2010-06-04 12:50     ` [V2 1/3] mxc: Add support for the imx51 3-stack board jason

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C07BEAE.7020205@gmail.com \
    --to=jason77.wang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).