From mboxrd@z Thu Jan 1 00:00:00 1970 From: troy.kisky@boundarydevices.com (Troy Kisky) Date: Mon, 07 Jun 2010 14:15:47 -0700 Subject: [PATCH] mxc: Fix pad names for imx51 In-Reply-To: <20100607210448.GA2446@matterhorn.lan> References: <1275566746-6510-1-git-send-email-jason77.wang@gmail.com> <1275566746-6510-2-git-send-email-jason77.wang@gmail.com> <20100604085320.GB25357@pengutronix.de> <20100604105347.GA2982@matterhorn.lan> <20100604140959.GB2982@matterhorn.lan> <4C0D5996.9050906@boundarydevices.com> <20100607210448.GA2446@matterhorn.lan> Message-ID: <4C0D6183.1010501@boundarydevices.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Amit Kucheria wrote: > On 10 Jun 07, Troy Kisky wrote: > >>> On 10 Jun 04, Amit Kucheria wrote: >>> > > > >>> +#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) > > > >>> +#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, MX51_GPIO_PAD_CTRL) >>> +#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) >> Why all the stuttering? >> Isn't MX51_PAD_GPIO_1_9 or MX51_PAD_DISP2_DAT15 descriptive enough? >> > > Just following the convention use in the rest of imx devices. See the > following comment at the top of the file: > > /* > * The naming convention for the pad modes is MX51_PAD___ > * If or refers to a GPIO, it is named > * GPIO__ see also iomux-v3.h > */ > > We could use the short names for pads being used in their "native mode". > But as soon as we use the pad in a different mode, such as > PAD_CSPI1_SCLK__GPIO_4_27 above, we'd need a different naming convention. > > Regards, > Amit > I'm fine with MX51_PAD_CSPI1_SCLK__GPIO_4_27, but I don't care for MX51_PAD_GPIO_1_9__GPIO_1_9. How about changing the comment to /* * The naming convention for the pad modes is MX51_PAD_ * or MX51_PAD___ if padname != padmode. * If or refers to a GPIO, it is named * GPIO__ see also iomux-v3.h */