[PATCH 0/3] EP93xx: Add i2s audio support

[ryan@bluewatersys.com (Ryan Mallon)]

Mark Brown wrote:
> On Tue, Jun 08, 2010 at 10:01:09PM +1200, Ryan Mallon wrote:
>> Repost of the i2s audio series for ep93xx. Patch 2/3 is unchanged. The
>> core support has been modified to move setting of the SPOL and ORIDE
>> bits of the i2sclkdiv register, as well as the i2s pin strapping
>> configuration, to a new function called ep93xx_i2s_acquire which is
>> called from the audio board drivers.
> 
> I've now applied both patches.  There was a trivial fixup required for
> the clocks due to an add/add overlap with the SPI clock - I think it's
> OK but please check.

Stupid question, but where was it applied? I can't find it in any of the
branches at:
http://opensource.wolfsonmicro.com/cgi-bin/gitweb.cgi?p=linux-2.6-asoc.git;a=summary

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934