From: mcuelenaere@gmail.com (Maurus Cuelenaere)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: S3C2416: Add platform helpers for setup SDHCI
Date: Tue, 22 Jun 2010 15:19:28 +0200 [thread overview]
Message-ID: <4C20B860.80308@gmail.com> (raw)
In-Reply-To: <1277212585-25605-5-git-send-email-jekhor@gmail.com>
Op 22-06-10 15:16, Yauhen Kharuzhy schreef:
> Samsung S3C2416 has two SDHCI controllers compatible with other
> Samsung's SoCs (S3C64XX, S5PC100 etc...).
>
> Add required platform setup code that the devices can be used with
> sdhci-s3c driver.
>
> Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
> ---
> arch/arm/mach-s3c2416/Kconfig | 23 ++++++++++
> arch/arm/mach-s3c2416/Makefile | 5 ++
> arch/arm/mach-s3c2416/s3c2416.c | 5 ++
> arch/arm/mach-s3c2416/setup-sdhci-gpio.c | 60 +++++++++++++++++++++++++++
> arch/arm/mach-s3c2416/setup-sdhci.c | 62 ++++++++++++++++++++++++++++
> arch/arm/plat-samsung/include/plat/sdhci.h | 34 +++++++++++++++
> 6 files changed, 189 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> create mode 100644 arch/arm/mach-s3c2416/setup-sdhci.c
>
> diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
> index eafb0ed..e055c7f 100644
> --- a/arch/arm/mach-s3c2416/Kconfig
> +++ b/arch/arm/mach-s3c2416/Kconfig
> @@ -25,6 +25,17 @@ config S3C2416_DMA
> help
> Internal config node for S3C2416 DMA support
>
> +config S3C2416_SETUP_SDHCI
> + bool
> + select S3C2416_SETUP_SDHCI_GPIO
> + help
> + Internal helper functions for S3C2416 based SDHCI systems
> +
> +config S3C2416_SETUP_SDHCI_GPIO
> + bool
> + help
> + Common setup code for SDHCI gpio.
> +
> menu "S3C2416 Machines"
>
> config MACH_SMDK2416
> @@ -36,7 +47,19 @@ config MACH_SMDK2416
> select S3C_DEV_HSMMC1
> select S3C_DEV_NAND
> select S3C_DEV_USB_HOST
> + select S3C2416_SETUP_SDHCI
> help
> Say Y here if you are using an SMDK2416
>
> +config MACH_HANLIN_V3C
> + bool "Hanlin eReader V3C"
> + select CPU_S3C2416
> + select S3C_DEV_HSMMC
> + select S3C_DEV_HSMMC1
> + select S3C_DEV_NAND
> + select S3C_DEV_USB_HOST
> + select S3C2416_SETUP_SDHCI
> + help
> + Say Y here if you are using an Jinke's Hanlin V3C eReader
> +
>
This seems to be unrelated to the patch?
> endmenu
> diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
> index 6c12c7b..678e148 100644
> --- a/arch/arm/mach-s3c2416/Makefile
> +++ b/arch/arm/mach-s3c2416/Makefile
> @@ -14,6 +14,11 @@ obj-$(CONFIG_CPU_S3C2416) += irq.o
>
> #obj-$(CONFIG_S3C2416_DMA) += dma.o
>
> +# Device setup
> +obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
> +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> +
> # Machine support
>
> obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
> +obj-$(CONFIG_MACH_HANLIN_V3C) += mach-v3c.o
> diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
> index 355ab62..06eacf8 100644
> --- a/arch/arm/mach-s3c2416/s3c2416.c
> +++ b/arch/arm/mach-s3c2416/s3c2416.c
> @@ -53,6 +53,7 @@
> #include <plat/s3c2416.h>
> #include <plat/devs.h>
> #include <plat/cpu.h>
> +#include <plat/sdhci.h>
>
> #include <plat/iic-core.h>
>
> @@ -115,6 +116,10 @@ void __init s3c2416_map_io(void)
> s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
> s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
>
> + /* initialize device information early */
> + s3c2416_default_sdhci0();
> + s3c2416_default_sdhci1();
> +
> iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
> }
>
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c b/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> new file mode 100644
> index 0000000..ebdab15
> --- /dev/null
> +++ b/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> @@ -0,0 +1,60 @@
> +/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c
> + *
> + * Copyright 2010 Promwad Innovation Company
> + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
> + *
> + * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
> + *
> + * Based on mach-s3c64xx/setup-sdhci-gpio.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +
> +#include <mach/gpio.h>
> +#include <mach/regs-gpio.h>
> +#include <plat/gpio-cfg.h>
> +
> +/* Note: hsmmc1 and hsmmc0 are swapped versus datasheet */
> +
> +void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
> +{
> + unsigned int gpio;
> + unsigned int end;
> +
> + end = S3C2410_GPE(7 + width);
> +
> + /* Set all the necessary GPE pins to special-function 0 */
> + for (gpio = S3C2410_GPE(5); gpio < end; gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> + }
> +}
> +
> +void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
> +{
> + unsigned int gpio;
> + unsigned int end;
> +
> + end = S3C2410_GPL(0 + width);
> +
> + /* Set all the necessary GPG pins to special-function 0 */
> + for (gpio = S3C2410_GPL(0); gpio < end; gpio++) {
> + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
> + }
> +
> + s3c_gpio_cfgpin(S3C2410_GPL(8), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S3C2410_GPL(8), S3C_GPIO_PULL_NONE);
> + s3c_gpio_cfgpin(S3C2410_GPL(9), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S3C2410_GPL(9), S3C_GPIO_PULL_NONE);
> +}
> +
> +
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
> new file mode 100644
> index 0000000..345ddd1
> --- /dev/null
> +++ b/arch/arm/mach-s3c2416/setup-sdhci.c
> @@ -0,0 +1,62 @@
> +/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
> + *
> + * Copyright 2010 Promwad Innovation Company
> + * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
> + *
> + * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
> + *
> + * Based on mach-s3c64xx/setup-sdhci.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/host.h>
> +
> +#include <plat/regs-sdhci.h>
> +#include <plat/sdhci.h>
> +
> +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
> +
> +char *s3c2416_hsmmc_clksrcs[4] = {
> + [0] = "hsmmc",
> + [1] = "hsmmc",
> + [2] = "hsmmc-if",
> + /* [3] = "48m", - note not successfully used yet */
> +};
> +
> +void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
> + void __iomem *r,
> + struct mmc_ios *ios,
> + struct mmc_card *card)
> +{
> + u32 ctrl2, ctrl3;
> +
> + ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
> + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
> + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
> + S3C_SDHCI_CTRL2_ENFBCLKRX |
> + S3C_SDHCI_CTRL2_DFCNT_NONE |
> + S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
> +
> + if (ios->clock < 25 * 1000000)
> + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
> + S3C_SDHCI_CTRL3_FCSEL2 |
> + S3C_SDHCI_CTRL3_FCSEL1 |
> + S3C_SDHCI_CTRL3_FCSEL0);
> + else
> + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
> +
> + writel(ctrl2, r + S3C_SDHCI_CONTROL2);
> + writel(ctrl3, r + S3C_SDHCI_CONTROL3);
> +}
> +
> diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
> index 13f9fb2..d408140 100644
> --- a/arch/arm/plat-samsung/include/plat/sdhci.h
> +++ b/arch/arm/plat-samsung/include/plat/sdhci.h
> @@ -78,6 +78,8 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
> extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
> extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
> extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
> +extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
> +extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
>
> /* S3C6400 SDHCI setup */
>
> @@ -270,6 +272,38 @@ static inline void s5pv210_default_sdhci1(void) { }
> static inline void s5pv210_default_sdhci2(void) { }
> #endif /* CONFIG_S5PC100_SETUP_SDHCI */
>
> +/* S3C2416 SDHCI setup */
> +#ifdef CONFIG_S3C2416_SETUP_SDHCI
> +extern char *s3c2416_hsmmc_clksrcs[4];
> +
> +extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
> + void __iomem *r,
> + struct mmc_ios *ios,
> + struct mmc_card *card);
> +
> +#ifdef CONFIG_S3C_DEV_HSMMC
> +static inline void s3c2416_default_sdhci0(void)
> +{
> + s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
> + s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
> + s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
> +}
> +#else
> +static inline void s3c2416_default_sdhci0(void) { }
> +#endif /* CONFIG_S3C_DEV_HSMMC */
> +
> +#ifdef CONFIG_S3C_DEV_HSMMC1
> +static inline void s3c2416_default_sdhci1(void)
> +{
> + s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
> + s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
> + s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
> +}
> +#else
> +static inline void s3c2416_default_sdhci1(void) { }
> +#endif /* CONFIG_S3C_DEV_HSMMC1 */
> +
> +#endif /* CONFIG_S3C2416_SETUP_SDHCI */
>
>
>
>
--
Maurus Cuelenaere
next prev parent reply other threads:[~2010-06-22 13:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-22 13:16 S3C2416 fixes (gpiolib, SDHCI, compilation without FB device) Yauhen Kharuzhy
2010-06-22 13:16 ` [PATCH 1/4] ARM: S3C24XX: Fix gpiolib support for ports K..M Yauhen Kharuzhy
2010-06-22 13:16 ` [PATCH 2/4] ARM: S3C2416: Set name of the framebuffer device only if it present Yauhen Kharuzhy
2010-06-22 13:16 ` [PATCH 3/4] ARM: S3C2416: Add clock definition for HSMMC1 Yauhen Kharuzhy
2010-06-22 13:16 ` [PATCH 4/4] ARM: S3C2416: Add platform helpers for setup SDHCI Yauhen Kharuzhy
2010-06-22 13:19 ` Maurus Cuelenaere [this message]
2010-06-22 14:05 ` Yauhen Kharuzhy
2010-06-22 13:45 ` Darius Augulis
2010-06-22 14:19 ` Yauhen Kharuzhy
2010-06-22 13:40 ` [PATCH 1/4] ARM: S3C24XX: Fix gpiolib support for ports K..M Vasily Khoruzhick
2010-06-25 10:55 ` S3C2416 fixes (gpiolib, SDHCI, compilation without FB device) Darius Augulis
2010-06-28 6:01 ` Marek Szyprowski
2010-07-06 17:02 ` Darius Augulis
2010-07-08 7:23 ` Marek Szyprowski
2010-07-08 17:08 ` Darius Augulis
2010-10-18 12:30 ` Kukjin Kim
2010-10-18 13:00 ` Darius Augulis
2010-10-18 13:04 ` Kukjin Kim
2010-10-18 13:11 ` Darius Augulis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C20B860.80308@gmail.com \
--to=mcuelenaere@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).