From mboxrd@z Thu Jan 1 00:00:00 1970 From: mcuelenaere@gmail.com (Maurus Cuelenaere) Date: Mon, 05 Jul 2010 13:39:40 +0200 Subject: [PATCH] ARM: S5P: Add PMU device In-Reply-To: <1278294411-5104-1-git-send-email-jy0922.shim@samsung.com> References: <1278294411-5104-1-git-send-email-jy0922.shim@samsung.com> Message-ID: <4C31C47C.1050905@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Op 05-07-10 03:46, Joonyoung Shim schreef: > This patch adds an initcall for the s5p platforms so that they register > their PMU IRQs with the PMU framework in the Kernel. > > Signed-off-by: Joonyoung Shim > --- > arch/arm/mach-s5p6442/include/mach/irqs.h | 2 +- > arch/arm/mach-s5pc100/include/mach/irqs.h | 1 + > arch/arm/mach-s5pv210/include/mach/irqs.h | 1 + > arch/arm/plat-s5p/Makefile | 1 + > arch/arm/plat-s5p/dev-pmu.c | 37 +++++++++++++++++++++++++++++ > 5 files changed, 41 insertions(+), 1 deletions(-) > create mode 100644 arch/arm/plat-s5p/dev-pmu.c Wouldn't it be better if this was in plat-samsung? I can see that the S3C6410 datasheet mentions a PMU_IRQ_ENABLE bit in SYS_OTHERS so I suspect that it has the same functionality (even though there's no mention of which interrupt this is). -- Maurus Cuelenaere