From mboxrd@z Thu Jan  1 00:00:00 1970
From: augulis.darius@gmail.com (Darius Augulis)
Date: Thu, 08 Jul 2010 20:08:35 +0300
Subject: S3C2416 fixes (gpiolib, SDHCI, compilation without FB device)
In-Reply-To: <000201cb1e6e$8b3f7a20$a1be6e60$%szyprowski@samsung.com>
References: <1277212585-25605-1-git-send-email-jekhor@gmail.com>
	<4C248B23.7060905@gmail.com>
	<000001cb1687$638b2310$2aa16930$%szyprowski@samsung.com>
	<4C3361BC.2040204@gmail.com>
	<000201cb1e6e$8b3f7a20$a1be6e60$%szyprowski@samsung.com>
Message-ID: <4C360613.1000506@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 07/08/2010 10:23 AM, Marek Szyprowski wrote:
> Hello,
>
> On Tuesday, July 06, 2010 7:03 PM Darius Augulis wrote:
>
>> On 06/28/2010 09:01 AM, Marek Szyprowski wrote:
>>> Hello,
>>>
>>> On Friday, June 25, 2010 12:56 PM Darius Augulis wrote:
>>>
>>>> On 06/22/2010 04:16 PM, Yauhen Kharuzhy wrote:
>>>>> This patch series fixes SDHCI on S3C2416. I got SD card working with
>> this
>>>> patches
>>>>> and with patches for GPIO card detection support by Marek Szyprowski.
>>>>>
>>>>
>>>> Unfortunately I did not get SD card working with these patches. I'm
>>>> using custom board, not SMDK2416, but SD slot connection and schematics
>>>> are the same like in SMDK2416. I've tried to debug a bit this problem
>>>> and this is what I got: kernel do detection of card insert/remove,
>>>> driver prints messages:
>>>>
>>>> s3c-sdhci s3c-sdhci.1: card inserted.
>>>> s3c-sdhci s3c-sdhci.1: card removed.
>>>>
>>>> Then I put some printk in s3c-sdhci driver and MMC core and found that
>>>> mmc_rescan() is called only once at startup and no more when
>>>> inserting/removing SD card. Also mmc_rescan() stops at that point where
>>>> mmc_power_up() is called and does not return. And mmc_power_up() stops
>>>> where mmc_delay(10) is called and does not return too.
>>>> Every time when inserting/removing SD card only functions
>>>> sdhci_tasklet_card() and mmc_detect_change() are called, and nothing
>>>> happens. Kernel doesn't detect the card inserted.
>>>> Maybe this info could help to debug where the problem is - in my custom
>>>> board or in your patches?
>>>
>>> Have you tried with polled card detection method (SDHCI_CD_NONE)? If it
>>> doesn't work I suspect something with the hardware. Checking with mmc
>> debug
>>> enabled might also help figuring this issue out.
>>
>> yes, I've tried that, but didn't get sd card working. I got schematics
>> from China manufacturer, SD card connection is the same like in
>> smdk2416. with mmc debug enabled I found that SD card is detected when
>> inserted or removed, but after detection card initialisation is not
>> performed.
>
> Does it work without my patches or with other Linux kernel? You can try to
> check the custom Linux 2.6.29 from
> git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git

I did try with and without your patches. First, I applied only s3c2416 
realated patches from Yauhen, then I've added your patches, but nothing 
changed.

>
> I would like to know whether my patches cause the problem or there is some
> kind of hardware issue with your board.
>
> Best regards
> --
> Marek Szyprowski
> Samsung Poland R&D Center
>