From mboxrd@z Thu Jan  1 00:00:00 1970
From: ben@simtec.co.uk (Ben Dooks)
Date: Wed, 21 Jul 2010 01:38:28 +0100
Subject: [PATCH v3 5/7] ARM: S5PV210: macros for clock registers
	at	regs-clock.h
In-Reply-To: <1279517483-22751-6-git-send-email-myungjoo.ham@samsung.com>
References: <1279517483-22751-1-git-send-email-myungjoo.ham@samsung.com>	<1279517483-22751-2-git-send-email-myungjoo.ham@samsung.com>	<1279517483-22751-3-git-send-email-myungjoo.ham@samsung.com>	<1279517483-22751-4-git-send-email-myungjoo.ham@samsung.com>	<1279517483-22751-5-git-send-email-myungjoo.ham@samsung.com>
	<1279517483-22751-6-git-send-email-myungjoo.ham@samsung.com>
Message-ID: <4C464184.2000301@simtec.co.uk>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 07/19/10 06:31, MyungJoo Ham wrote:
> Previously, most of CLK_DIV/SRC register accessing mask and shift
> values were used at arch/arm/mach-s5pv210/clock.c only; thus we
> had not been using macros for these. However, as CPUFREQ uses
> those shift and mask values as well, we'd better define them at a single
> location, whose proper location would be regs-clock.h.
>
> Note that only the information about registers used by CPUFREQ are
> defined. However, we may need to define other registers later if we add
> other parts.
>
> Signed-off-by: MyungJoo Ham<myungjoo.ham@samsung.com>
> Signed-off-by: Kyungmin Park<kyungmin.park@samsung.com>
> ---
>   arch/arm/mach-s5pv210/include/mach/regs-clock.h |   45 +++++++++++++++++++++--
>   1 files changed, 42 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
> index 2a25ab4..a117ecc 100644
> --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
> +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
> @@ -66,11 +66,30 @@
>   #define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
>   #define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
>   #define S5P_CLK_OUT		S5P_CLKREG(0x500)
> +#define S5P_CLK_DIV_STAT0   S5P_CLKREG(0x1000)
> +#define S5P_CLK_DIV_STAT1   S5P_CLKREG(0x1004)
> +#define S5P_CLK_MUX_STAT0   S5P_CLKREG(0x1100)
> +#define S5P_CLK_MUX_STAT1   S5P_CLKREG(0x1104)
> +
> +#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
>
>   /* CLKSRC0 */
> -#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
> -#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
> -#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
> +#define S5P_CLKSRC0_APLL_MASK		(0x1<<  0)
> +#define S5P_CLKSRC0_APLL_SHIFT		(0)
> +#define S5P_CLKSRC0_MPLL_MASK		(0x1<<  4)
> +#define S5P_CLKSRC0_MPLL_SHIFT		(4)
> +#define S5P_CLKSRC0_EPLL_MASK		(0x1<<  8)
> +#define S5P_CLKSRC0_EPLL_SHIFT		(8)
> +#define S5P_CLKSRC0_VPLL_MASK		(0x1<<  12)
> +#define S5P_CLKSRC0_VPLL_SHIFT		(12)
> +#define S5P_CLKSRC0_MUX200_MASK		(0x1<<  16)
> +#define S5P_CLKSRC0_MUX200_SHIFT	(16)
> +#define S5P_CLKSRC0_MUX166_MASK		(0x1<<  20)
> +#define S5P_CLKSRC0_MUX166_SHIFT	(20)
> +#define S5P_CLKSRC0_MUX133_MASK		(0x1<<  24)
> +#define S5P_CLKSRC0_MUX133_SHIFT	(24)
> +#define S5P_CLKSRC0_ONENAND_MASK	(0x1<<  28)
> +#define S5P_CLKSRC0_ONENAND_SHIFT	(28)
>
>   /* CLKDIV0 */
>   #define S5P_CLKDIV0_APLL_SHIFT		(0)
> @@ -90,6 +109,26 @@
>   #define S5P_CLKDIV0_PCLK66_SHIFT	(28)
>   #define S5P_CLKDIV0_PCLK66_MASK		(0x7<<  S5P_CLKDIV0_PCLK66_SHIFT)
>
> +/* CLKSRC2 */
> +#define S5P_CLKSRC2_G3D_MASK		(0x3<<  0)
> +#define S5P_CLKSRC2_G3D_SHIFT		(0)
> +#define S5P_CLKSRC2_MFC_MASK		(0x3<<  4)
> +#define S5P_CLKSRC2_MFC_SHIFT		(4)
> +#define S5P_CLKSRC2_G2D_MASK		(0x3<<  8)
> +#define S5P_CLKSRC2_G2D_SHIFT		(8)
> +
> +/* CLKDIV2 */
> +#define S5P_CLKDIV2_G3D_MASK		(0xF<<  0)
> +#define S5P_CLKDIV2_G3D_SHIFT		(0)
> +#define S5P_CLKDIV2_MFC_MASK		(0xF<<  4)
> +#define S5P_CLKDIV2_MFC_SHIFT		(4)
> +#define S5P_CLKDIV2_G2D_MASK		(0xF<<  8)
> +#define S5P_CLKDIV2_G2D_SHIFT		(8)

do we actually need these defines, if we're adding clocks
we've not used header-based items if we can help it.

> +/* CLKDIV6 */
> +#define S5P_CLKDIV6_ONEDRAM_MASK	(0xf<<28)
> +#define S5P_CLKDIV6_ONEDRAM_SHIFT	(28)
> +
>   /* Registers related to power management */
>   #define S5P_PWR_CFG		S5P_CLKREG(0xC000)
>   #define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)


-- 
Ben Dooks, Design & Software Engineer, Simtec Electronics

http://www.simtec.co.uk/