[PATCH] ARM: pxa: Fix pxa3xx-u2d crash when ULPI not used

[grinberg@compulab.co.il (Igor Grinberg)]

 On 09/03/10 23:35, Marek Vasut wrote:
> In case the pxa3xx-u2d driver isn't used, probing of ohci-pxa27x will cause an
> ugly kernel crash (NULL pointer dereference in pxa3xx_u2d_start_hc(), because
> struct u2d is NULL and clk_enable() call will crash the kernel, trying to access
> it).

ohci code checks for pxa3xx cpu and only then runs start/stop hc.
pxa3xx_ulpi.c is compiled if CONFIG_PXA3xx is selected.
The device <-> driver binding should not be a problem, so the
pxa3xx_u2d_probe() will run.
The only case, I see, when struct u2d does not exist is failure of the
probe function. If this is the case, we are having an abnormal execution
and if your patch is dealing with this issue, shouldn't you comment it as such?

> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> ---
>  arch/arm/mach-pxa/pxa3xx-ulpi.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
> index e57439e..ce7168b 100644
> --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
> +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
> @@ -252,6 +252,10 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host)
>  {
>  	int err = 0;
>  
> +	/* In case the PXA3xx ULPI isn't used, do nothing. */
> +	if (!u2d)
> +		return 0;
> +
>  	clk_enable(u2d->clk);
>  
>  	if (cpu_is_pxa310()) {
> @@ -264,6 +268,10 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host)
>  
>  void pxa3xx_u2d_stop_hc(struct usb_bus *host)
>  {
> +	/* In case the PXA3xx ULPI isn't used, do nothing. */
> +	if (!u2d)
> +		return;
> +
>  	if (cpu_is_pxa310())
>  		pxa310_stop_otg_hc();
>  

-- 
Regards,
Igor.