From: Jiri.Pinkava@vscht.cz (Jiří Pinkava)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] n30: Add touchscreen support for Ace n35
Date: Mon, 4 Oct 2010 02:31:00 +0200 [thread overview]
Message-ID: <4CA92044.9010902@vscht.cz> (raw)
In-Reply-To: <4CA91FF7.7020908@vscht.cz>
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
---
arch/arm/mach-s3c2410/Kconfig | 1 +
arch/arm/mach-s3c2410/mach-n30.c | 13 +++++++++++++
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55..1d55349 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -100,6 +100,7 @@ config MACH_N30
select MACH_N35
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C2410_SETUP_TS
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
diff --git a/arch/arm/mach-s3c2410/mach-n30.c
b/arch/arm/mach-s3c2410/mach-n30.c
index ecc039a..be5235d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/mci.h>
#include <plat/s3c2410.h>
+#include <plat/ts.h>
#include <plat/udc.h>
static struct map_desc n30_iodesc[] __initdata = {
@@ -116,6 +117,13 @@ static struct s3c2410_udc_mach_info n30_udc_cfg
__initdata = {
.vbus_pin_inverted = 0,
};
+static struct s3c2410_ts_mach_info n30_ts_cfg __initdata = {
+ .delay = 16383,
+ .presc = 49,
+ .oversampling_shift = 3,
+ .cfg_gpio = s3c24xx_ts_cfg_gpio,
+};
+
static struct gpio_keys_button n30_buttons[] = {
{
.gpio = S3C2410_GPF(0),
@@ -391,6 +399,8 @@ static struct platform_device *n30_devices[]
__initdata = {
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
&n30_button_device,
&n30_blue_led,
&n30_warning_led,
@@ -404,6 +414,8 @@ static struct platform_device *n35_devices[]
__initdata = {
&s3c_device_rtc,
&s3c_device_usbgadget,
&s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
&n35_button_device,
&n35_blue_led,
&n35_warning_led,
@@ -566,6 +578,7 @@ static void __init n30_init(void)
WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
s3c24xx_fb_set_platdata(&n30_fb_info);
+ s3c24xx_ts_set_platdata(&n30_ts_cfg);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
s3c24xx_mci_set_platdata(&n30_mci_cfg);
s3c_i2c0_set_platdata(&n30_i2ccfg);
--
1.7.3.1
next prev parent reply other threads:[~2010-10-04 0:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-04 0:23 [PATCH 0/6] - Acer n35 fixes and features Jiří Pinkava
2010-10-04 0:24 ` [PATCH 1/6] n35: fix key codes and types Jiří Pinkava
2010-10-04 0:25 ` [PATCH 2/6] n35: Update GPIO documentation for Acer n35 Jiří Pinkava
2010-10-04 0:26 ` PATCH 3/6] n30: Clean up UARTs configuration Jiří Pinkava
2010-10-04 0:29 ` [PATCH 4/6] n30: Fix MMC power management Jiří Pinkava
2010-10-04 0:31 ` Jiří Pinkava [this message]
2010-10-04 0:32 ` [PATCH 6/6] n35: Add LCD backlight regulation Jiří Pinkava
2010-10-10 23:38 ` [PATCH 1/6] n35: fix key codes and types Ben Dooks
2010-10-13 7:49 ` Jiří Pinkava
2010-10-06 22:25 ` [PATCH 0/6] - Acer n35 fixes and features Ben Dooks
2010-10-10 23:43 ` Ben Dooks
2010-10-13 7:56 ` [PATCH 1/6] n35: fix key codes Jiri.Pinkava at vscht.cz
2010-10-13 7:56 ` [PATCH 2/6] n35: Update GPIO documentation for Acer n35 Jiri.Pinkava at vscht.cz
2010-10-13 7:56 ` [PATCH 3/6] n30: Clean up UARTs configuration Jiri.Pinkava at vscht.cz
2010-10-13 7:56 ` [PATCH 4/6] n30: Fix MMC power management on Acer n30 / n35 Jiri.Pinkava at vscht.cz
2010-10-13 7:56 ` [PATCH 5/6] n30: Add touchscreen support for " Jiri.Pinkava at vscht.cz
2010-10-13 7:56 ` [PATCH 6/6] n35: Add LCD backlight regulation on Acer n35 Jiri.Pinkava at vscht.cz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA92044.9010902@vscht.cz \
--to=jiri.pinkava@vscht.cz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).