From: ryan@bluewatersys.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: ep93xx: add AC97 platform support
Date: Mon, 11 Oct 2010 08:39:25 +1300 [thread overview]
Message-ID: <4CB2166D.5080706@bluewatersys.com> (raw)
In-Reply-To: <d63475d15634d7ffa4c4167cbead782a5aa1cfc9.1286707213.git.mika.westerberg@iki.fi>
On 10/10/2010 11:54 PM, Mika Westerberg wrote:
> Add platform support for the EP93xx AC97 controller driver.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
> ---
> arch/arm/mach-ep93xx/core.c | 32 +++++++++++++++++++++++
> arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 +
> arch/arm/mach-ep93xx/include/mach/platform.h | 1 +
> 3 files changed, 34 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
> index 4cb55d3..6f514c4 100644
> --- a/arch/arm/mach-ep93xx/core.c
> +++ b/arch/arm/mach-ep93xx/core.c
> @@ -826,6 +826,38 @@ void ep93xx_i2s_release(void)
> }
> EXPORT_SYMBOL(ep93xx_i2s_release);
>
> +/*************************************************************************
> + * EP93xx AC97 audio peripheral handling
> + *************************************************************************/
> +static struct resource ep93xx_ac97_resources[] = {
> + {
> + .start = EP93XX_AAC_PHYS_BASE,
> + .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = IRQ_EP93XX_AACINTR,
> + .end = IRQ_EP93XX_AACINTR,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct platform_device ep93xx_ac97_device = {
> + .name = "ep93xx-ac97",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(ep93xx_ac97_resources),
> + .resource = ep93xx_ac97_resources,
> +};
> +
> +void __init ep93xx_register_ac97(void)
> +{
> + /*
> + * Make sure that the AC97 pins are not used by I2S.
> + */
> + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
> + platform_device_register(&ep93xx_ac97_device);
> +}
The other ep93xx device support functions do this with acquire/release
functions. However, it is quite unlikely that a board will ever need to
switch from i2s to ac97 audio at runtime. Will see what Hartley thinks.
~Ryan
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan at bluewatersys.com PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934
next prev parent reply other threads:[~2010-10-10 19:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-10 10:54 [PATCH 0/4] ASoC AC97 audio support for ep93xx Mika Westerberg
2010-10-10 10:54 ` [PATCH 1/4] ARM: ep93xx: DMA: fix channel_disable Mika Westerberg
2010-10-10 19:34 ` Ryan Mallon
2010-10-10 10:54 ` [PATCH 2/4] ASoC: add ep93xx AC97 audio driver Mika Westerberg
2010-10-11 9:47 ` Mark Brown
2010-10-11 10:07 ` Mika Westerberg
2010-10-11 10:43 ` Mark Brown
2010-10-11 12:17 ` Mika Westerberg
2010-10-10 10:54 ` [PATCH 3/4] ARM: ep93xx: add AC97 platform support Mika Westerberg
2010-10-10 19:39 ` Ryan Mallon [this message]
2010-10-11 7:47 ` Mika Westerberg
2010-10-10 10:54 ` [PATCH 4/4] ASoC: ep93xx: add Simplemachines Sim.One AC97 audio support Mika Westerberg
2010-10-11 0:22 ` [alsa-devel] " Jassi Brar
2010-10-11 7:38 ` Mika Westerberg
2010-10-11 7:46 ` Jassi Brar
2010-10-10 17:02 ` [PATCH 0/4] ASoC AC97 audio support for ep93xx Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CB2166D.5080706@bluewatersys.com \
--to=ryan@bluewatersys.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).