* New Kirkwood board support
2010-10-28 18:34 New Kirkwood board support Nils Faerber
@ 2010-10-28 19:01 ` Uwe Kleine-König
2010-10-28 19:33 ` Nils Faerber
2010-10-28 19:36 ` Nils Faerber
0 siblings, 2 replies; 7+ messages in thread
From: Uwe Kleine-König @ 2010-10-28 19:01 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 28, 2010 at 08:34:45PM +0200, Nils Faerber wrote:
> Hello!
> Attached is a patch against 2.6.36 for a new Marvell Kirkwood based
> board - the TK71. For more information about the TK71 please look at the
> WarpComm project page at
> http://www.warpcomm.org/
>
> The patch is pretty much self contained and does not touch much else -
> though it does add a defconfig which might not be necessary (Nicolas
> pointed that out already) - in case this is not wanted I can drop that
> from the patch (or you can simply not commit that part).
>
> When looking at the patch please keep in mind that the TK71 is a SOM -
> system on module. This is e.g the reason why I have commted out the
> kirkwood_spi_init() - it is only necessary on baseboards that need SPI
> for something. Maybe at some time I will add KConfig options for
> different baseboard. For the time being I would like to keep such things
> in there so that baseboard makers faster get a clue how to en- or
> disable certain support.
>
> If you have comments about the patch you are welcome!
>
> I would very much like to see this finally go upstream.
>
> Thank you!
>
> Cheers
> nils
>
> --
> kernel concepts GbR Tel: +49-271-771091-12
> Sieghuetter Hauptweg 48 Fax: +49-271-771091-19
> D-57072 Siegen Mob: +49-176-21024535
> http://www.kernelconcepts.de
> From 2b5c0cb9c4317483936eb5b219e428dd270cff85 Mon Sep 17 00:00:00 2001
> From: Nils Faerber <nils.faerber@kernelconcepts.de>
> Date: Thu, 28 Oct 2010 20:18:02 +0200
> Subject: [PATCH 1/2] Add WarpComm TK71 board support
>
> ---
> arch/arm/configs/tk71_defconfig | 1700 +++++++++++++++++++++++++++++++++++
I'm sure we're not taking new defconfigs now. Can you add your machine
to an existing defconfig? Moreover it's not reduced. You need to do at
least:
make tk71_defconfig
make savedefconfig
mv defconfig arch/arm/configs/tk71_defconfig
> arch/arm/mach-kirkwood/Kconfig | 6 +
> arch/arm/mach-kirkwood/Makefile | 1 +
> arch/arm/mach-kirkwood/tk71-setup.c | 153 ++++
> 4 files changed, 1860 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/configs/tk71_defconfig
> create mode 100644 arch/arm/mach-kirkwood/tk71-setup.c
>
> diff --git a/arch/arm/configs/tk71_defconfig b/arch/arm/configs/tk71_defconfig
> new file mode 100644
> index 0000000..a41e452
> --- /dev/null
> +++ b/arch/arm/configs/tk71_defconfig
> @@ -0,0 +1,1700 @@
> +#
> +# Automatically generated make config: don't edit
> +# Linux kernel version: 2.6.36
> +# Thu Oct 28 19:51:12 2010
> +#
> +CONFIG_ARM=y
> +CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> +CONFIG_GENERIC_GPIO=y
> +# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
> +CONFIG_GENERIC_CLOCKEVENTS=y
> +CONFIG_HAVE_PROC_CPU=y
> +CONFIG_GENERIC_HARDIRQS=y
> +CONFIG_STACKTRACE_SUPPORT=y
> +CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> +CONFIG_LOCKDEP_SUPPORT=y
> +CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> +CONFIG_HARDIRQS_SW_RESEND=y
> +CONFIG_GENERIC_IRQ_PROBE=y
> +CONFIG_RWSEM_GENERIC_SPINLOCK=y
> +CONFIG_GENERIC_HWEIGHT=y
> +CONFIG_GENERIC_CALIBRATE_DELAY=y
> +CONFIG_NEED_DMA_MAP_STATE=y
> +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> +CONFIG_VECTORS_BASE=0xffff0000
> +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> +CONFIG_CONSTRUCTORS=y
> +
> +#
> +# General setup
> +#
> +CONFIG_EXPERIMENTAL=y
> +CONFIG_BROKEN_ON_SMP=y
> +CONFIG_INIT_ENV_ARG_LIMIT=32
> +CONFIG_CROSS_COMPILE=""
> +CONFIG_LOCALVERSION=""
> +CONFIG_LOCALVERSION_AUTO=y
> +CONFIG_HAVE_KERNEL_GZIP=y
> +CONFIG_HAVE_KERNEL_LZMA=y
> +CONFIG_HAVE_KERNEL_LZO=y
> +CONFIG_KERNEL_GZIP=y
> +# CONFIG_KERNEL_LZMA is not set
> +# CONFIG_KERNEL_LZO is not set
> +CONFIG_SWAP=y
> +CONFIG_SYSVIPC=y
> +CONFIG_SYSVIPC_SYSCTL=y
> +# CONFIG_POSIX_MQUEUE is not set
> +# CONFIG_BSD_PROCESS_ACCT is not set
> +# CONFIG_TASKSTATS is not set
> +# CONFIG_AUDIT is not set
> +
> +#
> +# RCU Subsystem
> +#
> +CONFIG_TREE_RCU=y
> +# CONFIG_TINY_RCU is not set
> +# CONFIG_RCU_TRACE is not set
> +CONFIG_RCU_FANOUT=32
> +# CONFIG_RCU_FANOUT_EXACT is not set
> +# CONFIG_TREE_RCU_TRACE is not set
> +CONFIG_IKCONFIG=y
> +CONFIG_IKCONFIG_PROC=y
> +CONFIG_LOG_BUF_SHIFT=15
> +# CONFIG_CGROUPS is not set
> +# CONFIG_SYSFS_DEPRECATED_V2 is not set
> +# CONFIG_RELAY is not set
> +CONFIG_NAMESPACES=y
> +# CONFIG_UTS_NS is not set
> +# CONFIG_IPC_NS is not set
> +# CONFIG_USER_NS is not set
> +# CONFIG_PID_NS is not set
> +# CONFIG_NET_NS is not set
> +# CONFIG_BLK_DEV_INITRD is not set
> +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> +CONFIG_SYSCTL=y
> +CONFIG_ANON_INODES=y
> +# CONFIG_EMBEDDED is not set
> +CONFIG_UID16=y
> +CONFIG_SYSCTL_SYSCALL=y
> +CONFIG_KALLSYMS=y
> +# CONFIG_KALLSYMS_EXTRA_PASS is not set
> +CONFIG_HOTPLUG=y
> +CONFIG_PRINTK=y
> +CONFIG_BUG=y
> +CONFIG_ELF_CORE=y
> +CONFIG_BASE_FULL=y
> +CONFIG_FUTEX=y
> +CONFIG_EPOLL=y
> +CONFIG_SIGNALFD=y
> +CONFIG_TIMERFD=y
> +CONFIG_EVENTFD=y
> +CONFIG_SHMEM=y
> +CONFIG_AIO=y
> +CONFIG_HAVE_PERF_EVENTS=y
> +CONFIG_PERF_USE_VMALLOC=y
> +
> +#
> +# Kernel Performance Events And Counters
> +#
> +# CONFIG_PERF_EVENTS is not set
> +# CONFIG_PERF_COUNTERS is not set
> +CONFIG_VM_EVENT_COUNTERS=y
> +CONFIG_PCI_QUIRKS=y
> +CONFIG_SLUB_DEBUG=y
> +CONFIG_COMPAT_BRK=y
> +# CONFIG_SLAB is not set
> +CONFIG_SLUB=y
> +# CONFIG_PROFILING is not set
> +CONFIG_HAVE_OPROFILE=y
> +# CONFIG_KPROBES is not set
> +CONFIG_HAVE_KPROBES=y
> +CONFIG_HAVE_KRETPROBES=y
> +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> +
> +#
> +# GCOV-based kernel profiling
> +#
> +CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> +CONFIG_SLABINFO=y
> +CONFIG_RT_MUTEXES=y
> +CONFIG_BASE_SMALL=0
> +CONFIG_MODULES=y
> +# CONFIG_MODULE_FORCE_LOAD is not set
> +CONFIG_MODULE_UNLOAD=y
> +# CONFIG_MODULE_FORCE_UNLOAD is not set
> +# CONFIG_MODVERSIONS is not set
> +# CONFIG_MODULE_SRCVERSION_ALL is not set
> +CONFIG_BLOCK=y
> +CONFIG_LBDAF=y
> +# CONFIG_BLK_DEV_BSG is not set
> +# CONFIG_BLK_DEV_INTEGRITY is not set
> +
> +#
> +# IO Schedulers
> +#
> +CONFIG_IOSCHED_NOOP=y
> +# CONFIG_IOSCHED_DEADLINE is not set
> +CONFIG_IOSCHED_CFQ=y
> +CONFIG_DEFAULT_CFQ=y
> +# CONFIG_DEFAULT_NOOP is not set
> +CONFIG_DEFAULT_IOSCHED="cfq"
> +# CONFIG_INLINE_SPIN_TRYLOCK is not set
> +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
> +# CONFIG_INLINE_SPIN_LOCK is not set
> +# CONFIG_INLINE_SPIN_LOCK_BH is not set
> +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
> +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_SPIN_UNLOCK=y
> +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
> +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
> +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
> +# CONFIG_INLINE_READ_TRYLOCK is not set
> +# CONFIG_INLINE_READ_LOCK is not set
> +# CONFIG_INLINE_READ_LOCK_BH is not set
> +# CONFIG_INLINE_READ_LOCK_IRQ is not set
> +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_READ_UNLOCK=y
> +# CONFIG_INLINE_READ_UNLOCK_BH is not set
> +CONFIG_INLINE_READ_UNLOCK_IRQ=y
> +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
> +# CONFIG_INLINE_WRITE_TRYLOCK is not set
> +# CONFIG_INLINE_WRITE_LOCK is not set
> +# CONFIG_INLINE_WRITE_LOCK_BH is not set
> +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
> +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
> +CONFIG_INLINE_WRITE_UNLOCK=y
> +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
> +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
> +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
> +# CONFIG_MUTEX_SPIN_ON_OWNER is not set
> +CONFIG_FREEZER=y
> +
> +#
> +# System Type
> +#
> +CONFIG_MMU=y
> +# CONFIG_ARCH_AAEC2000 is not set
> +# CONFIG_ARCH_INTEGRATOR is not set
> +# CONFIG_ARCH_REALVIEW is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
> +# CONFIG_ARCH_AT91 is not set
> +# CONFIG_ARCH_BCMRING is not set
> +# CONFIG_ARCH_CLPS711X is not set
> +# CONFIG_ARCH_CNS3XXX is not set
> +# CONFIG_ARCH_GEMINI is not set
> +# CONFIG_ARCH_EBSA110 is not set
> +# CONFIG_ARCH_EP93XX is not set
> +# CONFIG_ARCH_FOOTBRIDGE is not set
> +# CONFIG_ARCH_MXC is not set
> +# CONFIG_ARCH_STMP3XXX is not set
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_H720X is not set
> +# CONFIG_ARCH_IOP13XX is not set
> +# CONFIG_ARCH_IOP32X is not set
> +# CONFIG_ARCH_IOP33X is not set
> +# CONFIG_ARCH_IXP23XX is not set
> +# CONFIG_ARCH_IXP2000 is not set
> +# CONFIG_ARCH_IXP4XX is not set
> +# CONFIG_ARCH_DOVE is not set
> +CONFIG_ARCH_KIRKWOOD=y
> +# CONFIG_ARCH_LOKI is not set
> +# CONFIG_ARCH_LPC32XX is not set
> +# CONFIG_ARCH_MV78XX0 is not set
> +# CONFIG_ARCH_ORION5X is not set
> +# CONFIG_ARCH_MMP is not set
> +# CONFIG_ARCH_KS8695 is not set
> +# CONFIG_ARCH_NS9XXX is not set
> +# CONFIG_ARCH_W90X900 is not set
> +# CONFIG_ARCH_NUC93X is not set
> +# CONFIG_ARCH_TEGRA is not set
> +# CONFIG_ARCH_PNX4008 is not set
> +# CONFIG_ARCH_PXA is not set
> +# CONFIG_ARCH_MSM is not set
> +# CONFIG_ARCH_SHMOBILE is not set
> +# CONFIG_ARCH_RPC is not set
> +# CONFIG_ARCH_SA1100 is not set
> +# CONFIG_ARCH_S3C2410 is not set
> +# CONFIG_ARCH_S3C64XX is not set
> +# CONFIG_ARCH_S5P6440 is not set
> +# CONFIG_ARCH_S5P6442 is not set
> +# CONFIG_ARCH_S5PC100 is not set
> +# CONFIG_ARCH_S5PV210 is not set
> +# CONFIG_ARCH_S5PV310 is not set
> +# CONFIG_ARCH_SHARK is not set
> +# CONFIG_ARCH_LH7A40X is not set
> +# CONFIG_ARCH_U300 is not set
> +# CONFIG_ARCH_U8500 is not set
> +# CONFIG_ARCH_NOMADIK is not set
> +# CONFIG_ARCH_DAVINCI is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_PLAT_SPEAR is not set
> +
> +#
> +# Marvell Kirkwood Implementations
> +#
> +# CONFIG_MACH_DB88F6281_BP is not set
> +# CONFIG_MACH_RD88F6192_NAS is not set
> +# CONFIG_MACH_RD88F6281 is not set
> +# CONFIG_MACH_MV88F6281GTW_GE is not set
> +# CONFIG_MACH_SHEEVAPLUG is not set
> +# CONFIG_MACH_ESATA_SHEEVAPLUG is not set
> +# CONFIG_MACH_GURUPLUG is not set
> +# CONFIG_MACH_TS219 is not set
> +# CONFIG_MACH_TS41X is not set
> +# CONFIG_MACH_OPENRD_BASE is not set
> +# CONFIG_MACH_OPENRD_CLIENT is not set
> +# CONFIG_MACH_OPENRD_ULTIMATE is not set
> +# CONFIG_MACH_NETSPACE_V2 is not set
> +CONFIG_MACH_TK71=y
> +# CONFIG_MACH_INETSPACE_V2 is not set
> +# CONFIG_MACH_NETSPACE_MAX_V2 is not set
> +# CONFIG_MACH_NET2BIG_V2 is not set
> +# CONFIG_MACH_NET5BIG_V2 is not set
> +# CONFIG_MACH_T5325 is not set
> +CONFIG_PLAT_ORION=y
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_FEROCEON=y
> +# CONFIG_CPU_FEROCEON_OLD_ID is not set
> +CONFIG_CPU_32v5=y
> +CONFIG_CPU_ABRT_EV5T=y
> +CONFIG_CPU_PABRT_LEGACY=y
> +CONFIG_CPU_CACHE_VIVT=y
> +CONFIG_CPU_COPY_FEROCEON=y
> +CONFIG_CPU_TLB_FEROCEON=y
> +CONFIG_CPU_CP15=y
> +CONFIG_CPU_CP15_MMU=y
> +
> +#
> +# Processor Features
> +#
> +CONFIG_ARM_THUMB=y
> +# CONFIG_CPU_ICACHE_DISABLE is not set
> +# CONFIG_CPU_DCACHE_DISABLE is not set
> +CONFIG_OUTER_CACHE=y
> +CONFIG_CACHE_FEROCEON_L2=y
> +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
> +CONFIG_ARM_L1_CACHE_SHIFT=5
> +
> +#
> +# Bus support
> +#
> +CONFIG_PCI=y
> +CONFIG_PCI_SYSCALL=y
> +# CONFIG_ARCH_SUPPORTS_MSI is not set
> +# CONFIG_PCI_STUB is not set
> +# CONFIG_PCI_IOV is not set
> +# CONFIG_PCCARD is not set
> +
> +#
> +# Kernel Features
> +#
> +CONFIG_TICK_ONESHOT=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> +CONFIG_VMSPLIT_3G=y
> +# CONFIG_VMSPLIT_2G is not set
> +# CONFIG_VMSPLIT_1G is not set
> +CONFIG_PAGE_OFFSET=0xC0000000
> +# CONFIG_PREEMPT_NONE is not set
> +CONFIG_PREEMPT_VOLUNTARY=y
> +# CONFIG_PREEMPT is not set
> +CONFIG_HZ=100
> +CONFIG_AEABI=y
> +# CONFIG_OABI_COMPAT is not set
> +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
> +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
> +# CONFIG_HIGHMEM is not set
> +# CONFIG_SPARSE_IRQ is not set
> +CONFIG_SELECT_MEMORY_MODEL=y
> +CONFIG_FLATMEM_MANUAL=y
> +CONFIG_FLATMEM=y
> +CONFIG_FLAT_NODE_MEM_MAP=y
> +CONFIG_HAVE_MEMBLOCK=y
> +CONFIG_PAGEFLAGS_EXTENDED=y
> +CONFIG_SPLIT_PTLOCK_CPUS=999999
> +# CONFIG_PHYS_ADDR_T_64BIT is not set
> +CONFIG_ZONE_DMA_FLAG=0
> +CONFIG_VIRT_TO_BUS=y
> +# CONFIG_KSM is not set
> +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> +CONFIG_FORCE_MAX_ZONEORDER=11
> +CONFIG_ALIGNMENT_TRAP=y
> +# CONFIG_UACCESS_WITH_MEMCPY is not set
> +# CONFIG_CC_STACKPROTECTOR is not set
> +# CONFIG_DEPRECATED_PARAM_STRUCT is not set
> +
> +#
> +# Boot options
> +#
> +CONFIG_ZBOOT_ROM_TEXT=0x0
> +CONFIG_ZBOOT_ROM_BSS=0x0
> +CONFIG_CMDLINE=""
> +# CONFIG_XIP_KERNEL is not set
> +# CONFIG_KEXEC is not set
> +# CONFIG_AUTO_ZRELADDR is not set
> +
> +#
> +# CPU Power Management
> +#
> +CONFIG_CPU_IDLE=y
> +CONFIG_CPU_IDLE_GOV_LADDER=y
> +CONFIG_CPU_IDLE_GOV_MENU=y
> +
> +#
> +# Floating point emulation
> +#
> +
> +#
> +# At least one emulation must be selected
> +#
> +# CONFIG_VFP is not set
> +
> +#
> +# Userspace binary formats
> +#
> +CONFIG_BINFMT_ELF=y
> +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> +CONFIG_HAVE_AOUT=y
> +# CONFIG_BINFMT_AOUT is not set
> +# CONFIG_BINFMT_MISC is not set
> +
> +#
> +# Power management options
> +#
> +CONFIG_PM=y
> +# CONFIG_PM_DEBUG is not set
> +CONFIG_PM_SLEEP=y
> +CONFIG_SUSPEND_NVS=y
> +CONFIG_SUSPEND=y
> +CONFIG_SUSPEND_FREEZER=y
> +# CONFIG_APM_EMULATION is not set
> +CONFIG_PM_RUNTIME=y
> +CONFIG_PM_OPS=y
> +CONFIG_ARCH_SUSPEND_POSSIBLE=y
> +CONFIG_NET=y
> +
> +#
> +# Networking options
> +#
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +# CONFIG_NET_KEY is not set
> +CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
> +# CONFIG_IP_ADVANCED_ROUTER is not set
> +CONFIG_IP_FIB_HASH=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +# CONFIG_IP_PNP_RARP is not set
> +# CONFIG_NET_IPIP is not set
> +# CONFIG_NET_IPGRE is not set
> +# CONFIG_IP_MROUTE is not set
> +# CONFIG_ARPD is not set
> +# CONFIG_SYN_COOKIES is not set
> +# CONFIG_INET_AH is not set
> +# CONFIG_INET_ESP is not set
> +# CONFIG_INET_IPCOMP is not set
> +# CONFIG_INET_XFRM_TUNNEL is not set
> +# CONFIG_INET_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
> +# CONFIG_INET_XFRM_MODE_TUNNEL is not set
> +# CONFIG_INET_XFRM_MODE_BEET is not set
> +CONFIG_INET_LRO=y
> +CONFIG_INET_DIAG=y
> +CONFIG_INET_TCP_DIAG=y
> +# CONFIG_TCP_CONG_ADVANCED is not set
> +CONFIG_TCP_CONG_CUBIC=y
> +CONFIG_DEFAULT_TCP_CONG="cubic"
> +# CONFIG_TCP_MD5SIG is not set
> +# CONFIG_IPV6 is not set
> +# CONFIG_NETWORK_SECMARK is not set
> +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> +# CONFIG_NETFILTER is not set
> +# CONFIG_IP_DCCP is not set
> +# CONFIG_IP_SCTP is not set
> +# CONFIG_RDS is not set
> +# CONFIG_TIPC is not set
> +# CONFIG_ATM is not set
> +# CONFIG_L2TP is not set
> +# CONFIG_BRIDGE is not set
> +# CONFIG_NET_DSA is not set
> +# CONFIG_VLAN_8021Q is not set
> +# CONFIG_DECNET is not set
> +# CONFIG_LLC2 is not set
> +# CONFIG_IPX is not set
> +# CONFIG_ATALK is not set
> +# CONFIG_X25 is not set
> +# CONFIG_LAPB is not set
> +# CONFIG_ECONET is not set
> +# CONFIG_WAN_ROUTER is not set
> +# CONFIG_PHONET is not set
> +# CONFIG_IEEE802154 is not set
> +# CONFIG_NET_SCHED is not set
> +# CONFIG_DCB is not set
> +
> +#
> +# Network testing
> +#
> +# CONFIG_NET_PKTGEN is not set
> +# CONFIG_HAMRADIO is not set
> +# CONFIG_CAN is not set
> +# CONFIG_IRDA is not set
> +# CONFIG_BT is not set
> +# CONFIG_AF_RXRPC is not set
> +CONFIG_WIRELESS=y
> +# CONFIG_CFG80211 is not set
> +# CONFIG_LIB80211 is not set
> +
> +#
> +# CFG80211 needs to be enabled for MAC80211
> +#
> +
> +#
> +# Some wireless drivers require a rate control algorithm
> +#
> +# CONFIG_WIMAX is not set
> +# CONFIG_RFKILL is not set
> +# CONFIG_NET_9P is not set
> +# CONFIG_CAIF is not set
> +
> +#
> +# Device Drivers
> +#
> +
> +#
> +# Generic Driver Options
> +#
> +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> +CONFIG_DEVTMPFS=y
> +# CONFIG_DEVTMPFS_MOUNT is not set
> +CONFIG_STANDALONE=y
> +CONFIG_PREVENT_FIRMWARE_BUILD=y
> +CONFIG_FW_LOADER=y
> +CONFIG_FIRMWARE_IN_KERNEL=y
> +CONFIG_EXTRA_FIRMWARE=""
> +# CONFIG_SYS_HYPERVISOR is not set
> +# CONFIG_CONNECTOR is not set
> +CONFIG_MTD=y
> +# CONFIG_MTD_DEBUG is not set
> +# CONFIG_MTD_TESTS is not set
> +# CONFIG_MTD_CONCAT is not set
> +CONFIG_MTD_PARTITIONS=y
> +# CONFIG_MTD_REDBOOT_PARTS is not set
> +CONFIG_MTD_CMDLINE_PARTS=y
> +# CONFIG_MTD_AFS_PARTS is not set
> +# CONFIG_MTD_AR7_PARTS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +# CONFIG_SM_FTL is not set
> +# CONFIG_MTD_OOPS is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +CONFIG_MTD_CFI=y
> +CONFIG_MTD_JEDECPROBE=y
> +CONFIG_MTD_GEN_PROBE=y
> +CONFIG_MTD_CFI_ADV_OPTIONS=y
> +CONFIG_MTD_CFI_NOSWAP=y
> +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
> +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
> +CONFIG_MTD_CFI_GEOMETRY=y
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +CONFIG_MTD_CFI_I1=y
> +# CONFIG_MTD_CFI_I2 is not set
> +# CONFIG_MTD_CFI_I4 is not set
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_OTP is not set
> +# CONFIG_MTD_CFI_INTELEXT is not set
> +# CONFIG_MTD_CFI_AMDSTD is not set
> +# CONFIG_MTD_CFI_STAA is not set
> +CONFIG_MTD_CFI_UTIL=y
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_PHYSMAP is not set
> +# CONFIG_MTD_ARM_INTEGRATOR is not set
> +# CONFIG_MTD_IMPA7 is not set
> +# CONFIG_MTD_INTEL_VR_NOR is not set
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_PMC551 is not set
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +CONFIG_MTD_NAND_ECC=y
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +CONFIG_MTD_NAND=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_SM_COMMON is not set
> +# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> +# CONFIG_MTD_NAND_DENALI is not set
> +# CONFIG_MTD_NAND_GPIO is not set
> +CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_RICOH is not set
> +# CONFIG_MTD_NAND_DISKONCHIP is not set
> +# CONFIG_MTD_NAND_CAFE is not set
> +# CONFIG_MTD_NAND_NANDSIM is not set
> +# CONFIG_MTD_NAND_PLATFORM is not set
> +# CONFIG_MTD_ALAUDA is not set
> +CONFIG_MTD_NAND_ORION=y
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# LPDDR flash memory drivers
> +#
> +# CONFIG_MTD_LPDDR is not set
> +
> +#
> +# UBI - Unsorted block images
> +#
> +# CONFIG_MTD_UBI is not set
> +# CONFIG_PARPORT is not set
> +CONFIG_BLK_DEV=y
> +# CONFIG_BLK_CPQ_DA is not set
> +# CONFIG_BLK_CPQ_CISS_DA is not set
> +# CONFIG_BLK_DEV_DAC960 is not set
> +# CONFIG_BLK_DEV_UMEM is not set
> +# CONFIG_BLK_DEV_COW_COMMON is not set
> +CONFIG_BLK_DEV_LOOP=y
> +# CONFIG_BLK_DEV_CRYPTOLOOP is not set
> +
> +#
> +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
> +#
> +# CONFIG_BLK_DEV_NBD is not set
> +# CONFIG_BLK_DEV_SX8 is not set
> +# CONFIG_BLK_DEV_UB is not set
> +# CONFIG_BLK_DEV_RAM is not set
> +# CONFIG_CDROM_PKTCDVD is not set
> +# CONFIG_ATA_OVER_ETH is not set
> +# CONFIG_MG_DISK is not set
> +# CONFIG_MISC_DEVICES is not set
> +CONFIG_HAVE_IDE=y
> +# CONFIG_IDE is not set
> +
> +#
> +# SCSI device support
> +#
> +CONFIG_SCSI_MOD=y
> +# CONFIG_RAID_ATTRS is not set
> +CONFIG_SCSI=y
> +CONFIG_SCSI_DMA=y
> +# CONFIG_SCSI_TGT is not set
> +# CONFIG_SCSI_NETLINK is not set
> +CONFIG_SCSI_PROC_FS=y
> +
> +#
> +# SCSI support type (disk, tape, CD-ROM)
> +#
> +CONFIG_BLK_DEV_SD=y
> +# CONFIG_CHR_DEV_ST is not set
> +# CONFIG_CHR_DEV_OSST is not set
> +CONFIG_BLK_DEV_SR=y
> +CONFIG_BLK_DEV_SR_VENDOR=y
> +CONFIG_CHR_DEV_SG=y
> +# CONFIG_CHR_DEV_SCH is not set
> +# CONFIG_SCSI_MULTI_LUN is not set
> +# CONFIG_SCSI_CONSTANTS is not set
> +# CONFIG_SCSI_LOGGING is not set
> +# CONFIG_SCSI_SCAN_ASYNC is not set
> +CONFIG_SCSI_WAIT_SCAN=m
> +
> +#
> +# SCSI Transports
> +#
> +# CONFIG_SCSI_SPI_ATTRS is not set
> +# CONFIG_SCSI_FC_ATTRS is not set
> +# CONFIG_SCSI_ISCSI_ATTRS is not set
> +# CONFIG_SCSI_SAS_LIBSAS is not set
> +# CONFIG_SCSI_SRP_ATTRS is not set
> +# CONFIG_SCSI_LOWLEVEL is not set
> +# CONFIG_SCSI_DH is not set
> +# CONFIG_SCSI_OSD_INITIATOR is not set
> +CONFIG_ATA=y
> +# CONFIG_ATA_NONSTANDARD is not set
> +CONFIG_ATA_VERBOSE_ERROR=y
> +CONFIG_SATA_PMP=y
> +
> +#
> +# Controllers with non-SFF native interface
> +#
> +# CONFIG_SATA_AHCI is not set
> +# CONFIG_SATA_AHCI_PLATFORM is not set
> +# CONFIG_SATA_INIC162X is not set
> +# CONFIG_SATA_SIL24 is not set
> +CONFIG_ATA_SFF=y
> +
> +#
> +# SFF controllers with custom DMA interface
> +#
> +# CONFIG_PDC_ADMA is not set
> +# CONFIG_SATA_QSTOR is not set
> +# CONFIG_SATA_SX4 is not set
> +CONFIG_ATA_BMDMA=y
> +
> +#
> +# SATA SFF controllers with BMDMA
> +#
> +# CONFIG_ATA_PIIX is not set
> +CONFIG_SATA_MV=y
> +# CONFIG_SATA_NV is not set
> +# CONFIG_SATA_PROMISE is not set
> +# CONFIG_SATA_SIL is not set
> +# CONFIG_SATA_SIS is not set
> +# CONFIG_SATA_SVW is not set
> +# CONFIG_SATA_ULI is not set
> +# CONFIG_SATA_VIA is not set
> +# CONFIG_SATA_VITESSE is not set
> +
> +#
> +# PATA SFF controllers with BMDMA
> +#
> +# CONFIG_PATA_ALI is not set
> +# CONFIG_PATA_AMD is not set
> +# CONFIG_PATA_ARTOP is not set
> +# CONFIG_PATA_ATIIXP is not set
> +# CONFIG_PATA_ATP867X is not set
> +# CONFIG_PATA_CMD64X is not set
> +# CONFIG_PATA_CS5520 is not set
> +# CONFIG_PATA_CS5530 is not set
> +# CONFIG_PATA_CYPRESS is not set
> +# CONFIG_PATA_EFAR is not set
> +# CONFIG_PATA_HPT366 is not set
> +# CONFIG_PATA_HPT37X is not set
> +# CONFIG_PATA_HPT3X2N is not set
> +# CONFIG_PATA_HPT3X3 is not set
> +# CONFIG_PATA_IT8213 is not set
> +# CONFIG_PATA_IT821X is not set
> +# CONFIG_PATA_JMICRON is not set
> +# CONFIG_PATA_MARVELL is not set
> +# CONFIG_PATA_NETCELL is not set
> +# CONFIG_PATA_NINJA32 is not set
> +# CONFIG_PATA_NS87415 is not set
> +# CONFIG_PATA_OLDPIIX is not set
> +# CONFIG_PATA_OPTIDMA is not set
> +# CONFIG_PATA_PDC2027X is not set
> +# CONFIG_PATA_PDC_OLD is not set
> +# CONFIG_PATA_RADISYS is not set
> +# CONFIG_PATA_RDC is not set
> +# CONFIG_PATA_SC1200 is not set
> +# CONFIG_PATA_SCH is not set
> +# CONFIG_PATA_SERVERWORKS is not set
> +# CONFIG_PATA_SIL680 is not set
> +# CONFIG_PATA_SIS is not set
> +# CONFIG_PATA_TOSHIBA is not set
> +# CONFIG_PATA_TRIFLEX is not set
> +# CONFIG_PATA_VIA is not set
> +# CONFIG_PATA_WINBOND is not set
> +
> +#
> +# PIO-only SFF controllers
> +#
> +# CONFIG_PATA_CMD640_PCI is not set
> +# CONFIG_PATA_MPIIX is not set
> +# CONFIG_PATA_NS87410 is not set
> +# CONFIG_PATA_OPTI is not set
> +# CONFIG_PATA_RZ1000 is not set
> +
> +#
> +# Generic fallback / legacy drivers
> +#
> +# CONFIG_ATA_GENERIC is not set
> +# CONFIG_PATA_LEGACY is not set
> +# CONFIG_MD is not set
> +# CONFIG_FUSION is not set
> +
> +#
> +# IEEE 1394 (FireWire) support
> +#
> +
> +#
> +# You can enable one or both FireWire driver stacks.
> +#
> +
> +#
> +# The newer stack is recommended.
> +#
> +# CONFIG_FIREWIRE is not set
> +# CONFIG_IEEE1394 is not set
> +# CONFIG_FIREWIRE_NOSY is not set
> +# CONFIG_I2O is not set
> +CONFIG_NETDEVICES=y
> +# CONFIG_DUMMY is not set
> +# CONFIG_BONDING is not set
> +# CONFIG_MACVLAN is not set
> +# CONFIG_EQUALIZER is not set
> +# CONFIG_TUN is not set
> +# CONFIG_VETH is not set
> +# CONFIG_ARCNET is not set
> +CONFIG_PHYLIB=y
> +
> +#
> +# MII PHY device drivers
> +#
> +CONFIG_MARVELL_PHY=y
> +# CONFIG_DAVICOM_PHY is not set
> +# CONFIG_QSEMI_PHY is not set
> +# CONFIG_LXT_PHY is not set
> +# CONFIG_CICADA_PHY is not set
> +# CONFIG_VITESSE_PHY is not set
> +# CONFIG_SMSC_PHY is not set
> +# CONFIG_BROADCOM_PHY is not set
> +# CONFIG_ICPLUS_PHY is not set
> +# CONFIG_REALTEK_PHY is not set
> +# CONFIG_NATIONAL_PHY is not set
> +# CONFIG_STE10XP is not set
> +# CONFIG_LSI_ET1011C_PHY is not set
> +# CONFIG_MICREL_PHY is not set
> +# CONFIG_FIXED_PHY is not set
> +# CONFIG_MDIO_BITBANG is not set
> +# CONFIG_NET_ETHERNET is not set
> +CONFIG_NETDEV_1000=y
> +# CONFIG_ACENIC is not set
> +# CONFIG_DL2K is not set
> +# CONFIG_E1000 is not set
> +# CONFIG_E1000E is not set
> +# CONFIG_IP1000 is not set
> +# CONFIG_IGB is not set
> +# CONFIG_IGBVF is not set
> +# CONFIG_NS83820 is not set
> +# CONFIG_HAMACHI is not set
> +# CONFIG_YELLOWFIN is not set
> +# CONFIG_R8169 is not set
> +# CONFIG_SIS190 is not set
> +# CONFIG_SKGE is not set
> +# CONFIG_SKY2 is not set
> +# CONFIG_VIA_VELOCITY is not set
> +# CONFIG_TIGON3 is not set
> +# CONFIG_BNX2 is not set
> +# CONFIG_CNIC is not set
> +CONFIG_MV643XX_ETH=y
> +# CONFIG_QLA3XXX is not set
> +# CONFIG_ATL1 is not set
> +# CONFIG_ATL1E is not set
> +# CONFIG_ATL1C is not set
> +# CONFIG_JME is not set
> +# CONFIG_NETDEV_10000 is not set
> +# CONFIG_TR is not set
> +CONFIG_WLAN=y
> +# CONFIG_ATMEL is not set
> +# CONFIG_PRISM54 is not set
> +# CONFIG_USB_ZD1201 is not set
> +# CONFIG_HOSTAP is not set
> +
> +#
> +# Enable WiMAX (Networking options) to see the WiMAX drivers
> +#
> +
> +#
> +# USB Network Adapters
> +#
> +# CONFIG_USB_CATC is not set
> +# CONFIG_USB_KAWETH is not set
> +# CONFIG_USB_PEGASUS is not set
> +# CONFIG_USB_RTL8150 is not set
> +# CONFIG_USB_USBNET is not set
> +# CONFIG_USB_IPHETH is not set
> +# CONFIG_WAN is not set
> +
> +#
> +# CAIF transport drivers
> +#
> +# CONFIG_FDDI is not set
> +# CONFIG_HIPPI is not set
> +# CONFIG_PPP is not set
> +# CONFIG_SLIP is not set
> +# CONFIG_NET_FC is not set
> +# CONFIG_NETCONSOLE is not set
> +# CONFIG_NETPOLL is not set
> +# CONFIG_NET_POLL_CONTROLLER is not set
> +# CONFIG_VMXNET3 is not set
> +# CONFIG_ISDN is not set
> +# CONFIG_PHONE is not set
> +
> +#
> +# Input device support
> +#
> +CONFIG_INPUT=y
> +# CONFIG_INPUT_FF_MEMLESS is not set
> +# CONFIG_INPUT_POLLDEV is not set
> +# CONFIG_INPUT_SPARSEKMAP is not set
> +
> +#
> +# Userland interfaces
> +#
> +CONFIG_INPUT_MOUSEDEV=y
> +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> +# CONFIG_INPUT_JOYDEV is not set
> +# CONFIG_INPUT_EVDEV is not set
> +# CONFIG_INPUT_EVBUG is not set
> +
> +#
> +# Input Device Drivers
> +#
> +# CONFIG_INPUT_KEYBOARD is not set
> +# CONFIG_INPUT_MOUSE is not set
> +# CONFIG_INPUT_JOYSTICK is not set
> +# CONFIG_INPUT_TABLET is not set
> +# CONFIG_INPUT_TOUCHSCREEN is not set
> +# CONFIG_INPUT_MISC is not set
> +
> +#
> +# Hardware I/O ports
> +#
> +# CONFIG_SERIO is not set
> +# CONFIG_GAMEPORT is not set
> +
> +#
> +# Character devices
> +#
> +CONFIG_VT=y
> +CONFIG_CONSOLE_TRANSLATIONS=y
> +CONFIG_VT_CONSOLE=y
> +CONFIG_HW_CONSOLE=y
> +# CONFIG_VT_HW_CONSOLE_BINDING is not set
> +# CONFIG_DEVKMEM is not set
> +# CONFIG_SERIAL_NONSTANDARD is not set
> +# CONFIG_N_GSM is not set
> +# CONFIG_NOZOMI is not set
> +
> +#
> +# Serial drivers
> +#
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> +CONFIG_SERIAL_8250_PCI=y
> +CONFIG_SERIAL_8250_NR_UARTS=4
> +CONFIG_SERIAL_8250_RUNTIME_UARTS=2
> +# CONFIG_SERIAL_8250_EXTENDED is not set
> +
> +#
> +# Non-8250 serial port support
> +#
> +# CONFIG_SERIAL_MFD_HSU is not set
> +CONFIG_SERIAL_CORE=y
> +CONFIG_SERIAL_CORE_CONSOLE=y
> +# CONFIG_SERIAL_JSM is not set
> +# CONFIG_SERIAL_TIMBERDALE is not set
> +# CONFIG_SERIAL_ALTERA_JTAGUART is not set
> +# CONFIG_SERIAL_ALTERA_UART is not set
> +CONFIG_UNIX98_PTYS=y
> +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> +CONFIG_LEGACY_PTYS=y
> +CONFIG_LEGACY_PTY_COUNT=16
> +# CONFIG_IPMI_HANDLER is not set
> +CONFIG_HW_RANDOM=y
> +# CONFIG_HW_RANDOM_TIMERIOMEM is not set
> +# CONFIG_R3964 is not set
> +# CONFIG_APPLICOM is not set
> +# CONFIG_RAW_DRIVER is not set
> +# CONFIG_TCG_TPM is not set
> +CONFIG_DEVPORT=y
> +# CONFIG_RAMOOPS is not set
> +CONFIG_I2C=y
> +CONFIG_I2C_BOARDINFO=y
> +CONFIG_I2C_COMPAT=y
> +CONFIG_I2C_CHARDEV=y
> +# CONFIG_I2C_MUX is not set
> +CONFIG_I2C_HELPER_AUTO=y
> +
> +#
> +# I2C Hardware Bus support
> +#
> +
> +#
> +# PC SMBus host controller drivers
> +#
> +# CONFIG_I2C_ALI1535 is not set
> +# CONFIG_I2C_ALI1563 is not set
> +# CONFIG_I2C_ALI15X3 is not set
> +# CONFIG_I2C_AMD756 is not set
> +# CONFIG_I2C_AMD8111 is not set
> +# CONFIG_I2C_I801 is not set
> +# CONFIG_I2C_ISCH is not set
> +# CONFIG_I2C_PIIX4 is not set
> +# CONFIG_I2C_NFORCE2 is not set
> +# CONFIG_I2C_SIS5595 is not set
> +# CONFIG_I2C_SIS630 is not set
> +# CONFIG_I2C_SIS96X is not set
> +# CONFIG_I2C_VIA is not set
> +# CONFIG_I2C_VIAPRO is not set
> +
> +#
> +# I2C system bus drivers (mostly embedded / system-on-chip)
> +#
> +# CONFIG_I2C_GPIO is not set
> +CONFIG_I2C_MV64XXX=y
> +# CONFIG_I2C_OCORES is not set
> +# CONFIG_I2C_PCA_PLATFORM is not set
> +# CONFIG_I2C_SIMTEC is not set
> +# CONFIG_I2C_XILINX is not set
> +
> +#
> +# External I2C/SMBus adapter drivers
> +#
> +# CONFIG_I2C_PARPORT_LIGHT is not set
> +# CONFIG_I2C_TAOS_EVM is not set
> +# CONFIG_I2C_TINY_USB is not set
> +
> +#
> +# Other I2C/SMBus bus drivers
> +#
> +# CONFIG_I2C_STUB is not set
> +# CONFIG_I2C_DEBUG_CORE is not set
> +# CONFIG_I2C_DEBUG_ALGO is not set
> +# CONFIG_I2C_DEBUG_BUS is not set
> +# CONFIG_SPI is not set
> +
> +#
> +# PPS support
> +#
> +# CONFIG_PPS is not set
> +CONFIG_ARCH_REQUIRE_GPIOLIB=y
> +CONFIG_GPIOLIB=y
> +CONFIG_GPIO_SYSFS=y
> +
> +#
> +# Memory mapped GPIO expanders:
> +#
> +# CONFIG_GPIO_IT8761E is not set
> +# CONFIG_GPIO_SCH is not set
> +
> +#
> +# I2C GPIO expanders:
> +#
> +# CONFIG_GPIO_MAX7300 is not set
> +# CONFIG_GPIO_MAX732X is not set
> +# CONFIG_GPIO_PCA953X is not set
> +# CONFIG_GPIO_PCF857X is not set
> +# CONFIG_GPIO_SX150X is not set
> +# CONFIG_GPIO_ADP5588 is not set
> +
> +#
> +# PCI GPIO expanders:
> +#
> +# CONFIG_GPIO_CS5535 is not set
> +# CONFIG_GPIO_BT8XX is not set
> +# CONFIG_GPIO_LANGWELL is not set
> +# CONFIG_GPIO_RDC321X is not set
> +
> +#
> +# SPI GPIO expanders:
> +#
> +
> +#
> +# AC97 GPIO expanders:
> +#
> +
> +#
> +# MODULbus GPIO expanders:
> +#
> +# CONFIG_W1 is not set
> +# CONFIG_POWER_SUPPLY is not set
> +# CONFIG_HWMON is not set
> +# CONFIG_THERMAL is not set
> +CONFIG_WATCHDOG=y
> +# CONFIG_WATCHDOG_NOWAYOUT is not set
> +
> +#
> +# Watchdog Device Drivers
> +#
> +# CONFIG_SOFT_WATCHDOG is not set
> +CONFIG_ORION_WATCHDOG=y
> +# CONFIG_MAX63XX_WATCHDOG is not set
> +# CONFIG_ALIM7101_WDT is not set
> +
> +#
> +# PCI-based Watchdog Cards
> +#
> +# CONFIG_PCIPCWATCHDOG is not set
> +# CONFIG_WDTPCI is not set
> +
> +#
> +# USB-based Watchdog Cards
> +#
> +# CONFIG_USBPCWATCHDOG is not set
> +CONFIG_SSB_POSSIBLE=y
> +
> +#
> +# Sonics Silicon Backplane
> +#
> +# CONFIG_SSB is not set
> +CONFIG_MFD_SUPPORT=y
> +# CONFIG_MFD_CORE is not set
> +# CONFIG_MFD_88PM860X is not set
> +# CONFIG_MFD_SM501 is not set
> +# CONFIG_MFD_ASIC3 is not set
> +# CONFIG_HTC_EGPIO is not set
> +# CONFIG_HTC_PASIC3 is not set
> +# CONFIG_HTC_I2CPLD is not set
> +# CONFIG_TPS65010 is not set
> +# CONFIG_TPS6507X is not set
> +# CONFIG_TWL4030_CORE is not set
> +# CONFIG_MFD_STMPE is not set
> +# CONFIG_MFD_TC35892 is not set
> +# CONFIG_MFD_TMIO is not set
> +# CONFIG_MFD_TC6393XB is not set
> +# CONFIG_PMIC_DA903X is not set
> +# CONFIG_PMIC_ADP5520 is not set
> +# CONFIG_MFD_MAX8925 is not set
> +# CONFIG_MFD_MAX8998 is not set
> +# CONFIG_MFD_WM8400 is not set
> +# CONFIG_MFD_WM831X is not set
> +# CONFIG_MFD_WM8350_I2C is not set
> +# CONFIG_MFD_WM8994 is not set
> +# CONFIG_MFD_PCF50633 is not set
> +# CONFIG_ABX500_CORE is not set
> +# CONFIG_MFD_TIMBERDALE is not set
> +# CONFIG_LPC_SCH is not set
> +# CONFIG_MFD_RDC321X is not set
> +# CONFIG_MFD_JANZ_CMODIO is not set
> +# CONFIG_MFD_TPS6586X is not set
> +# CONFIG_REGULATOR is not set
> +# CONFIG_MEDIA_SUPPORT is not set
> +
> +#
> +# Graphics support
> +#
> +CONFIG_VGA_ARB=y
> +CONFIG_VGA_ARB_MAX_GPUS=16
> +# CONFIG_DRM is not set
> +# CONFIG_VGASTATE is not set
> +# CONFIG_VIDEO_OUTPUT_CONTROL is not set
> +# CONFIG_FB is not set
> +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> +
> +#
> +# Display device support
> +#
> +# CONFIG_DISPLAY_SUPPORT is not set
> +
> +#
> +# Console display driver support
> +#
> +CONFIG_DUMMY_CONSOLE=y
> +CONFIG_FONT_8x16=y
> +# CONFIG_SOUND is not set
> +# CONFIG_HID_SUPPORT is not set
> +CONFIG_USB_SUPPORT=y
> +CONFIG_USB_ARCH_HAS_HCD=y
> +CONFIG_USB_ARCH_HAS_OHCI=y
> +CONFIG_USB_ARCH_HAS_EHCI=y
> +CONFIG_USB=y
> +# CONFIG_USB_DEBUG is not set
> +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
> +
> +#
> +# Miscellaneous USB options
> +#
> +CONFIG_USB_DEVICEFS=y
> +CONFIG_USB_DEVICE_CLASS=y
> +# CONFIG_USB_DYNAMIC_MINORS is not set
> +# CONFIG_USB_SUSPEND is not set
> +# CONFIG_USB_MON is not set
> +# CONFIG_USB_WUSB is not set
> +# CONFIG_USB_WUSB_CBAF is not set
> +
> +#
> +# USB Host Controller Drivers
> +#
> +# CONFIG_USB_C67X00_HCD is not set
> +# CONFIG_USB_XHCI_HCD is not set
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_ROOT_HUB_TT=y
> +CONFIG_USB_EHCI_TT_NEWSCHED=y
> +# CONFIG_USB_OXU210HP_HCD is not set
> +# CONFIG_USB_ISP116X_HCD is not set
> +# CONFIG_USB_ISP1760_HCD is not set
> +# CONFIG_USB_ISP1362_HCD is not set
> +# CONFIG_USB_OHCI_HCD is not set
> +# CONFIG_USB_UHCI_HCD is not set
> +# CONFIG_USB_SL811_HCD is not set
> +# CONFIG_USB_R8A66597_HCD is not set
> +# CONFIG_USB_WHCI_HCD is not set
> +# CONFIG_USB_HWA_HCD is not set
> +# CONFIG_USB_MUSB_HDRC is not set
> +
> +#
> +# USB Device Class drivers
> +#
> +# CONFIG_USB_ACM is not set
> +# CONFIG_USB_PRINTER is not set
> +# CONFIG_USB_WDM is not set
> +# CONFIG_USB_TMC is not set
> +
> +#
> +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> +#
> +
> +#
> +# also be needed; see USB_STORAGE Help for more info
> +#
> +CONFIG_USB_STORAGE=y
> +# CONFIG_USB_STORAGE_DEBUG is not set
> +# CONFIG_USB_STORAGE_DATAFAB is not set
> +# CONFIG_USB_STORAGE_FREECOM is not set
> +# CONFIG_USB_STORAGE_ISD200 is not set
> +# CONFIG_USB_STORAGE_USBAT is not set
> +# CONFIG_USB_STORAGE_SDDR09 is not set
> +# CONFIG_USB_STORAGE_SDDR55 is not set
> +# CONFIG_USB_STORAGE_JUMPSHOT is not set
> +# CONFIG_USB_STORAGE_ALAUDA is not set
> +# CONFIG_USB_STORAGE_ONETOUCH is not set
> +# CONFIG_USB_STORAGE_KARMA is not set
> +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> +CONFIG_USB_LIBUSUAL=y
> +
> +#
> +# USB Imaging devices
> +#
> +# CONFIG_USB_MDC800 is not set
> +# CONFIG_USB_MICROTEK is not set
> +
> +#
> +# USB port drivers
> +#
> +# CONFIG_USB_SERIAL is not set
> +
> +#
> +# USB Miscellaneous drivers
> +#
> +# CONFIG_USB_EMI62 is not set
> +# CONFIG_USB_EMI26 is not set
> +# CONFIG_USB_ADUTUX is not set
> +# CONFIG_USB_SEVSEG is not set
> +# CONFIG_USB_RIO500 is not set
> +# CONFIG_USB_LEGOTOWER is not set
> +# CONFIG_USB_LCD is not set
> +# CONFIG_USB_LED is not set
> +# CONFIG_USB_CYPRESS_CY7C63 is not set
> +# CONFIG_USB_CYTHERM is not set
> +# CONFIG_USB_IDMOUSE is not set
> +# CONFIG_USB_FTDI_ELAN is not set
> +# CONFIG_USB_APPLEDISPLAY is not set
> +CONFIG_USB_SISUSBVGA=m
> +CONFIG_USB_SISUSBVGA_CON=y
> +# CONFIG_USB_LD is not set
> +# CONFIG_USB_TRANCEVIBRATOR is not set
> +# CONFIG_USB_IOWARRIOR is not set
> +# CONFIG_USB_TEST is not set
> +# CONFIG_USB_ISIGHTFW is not set
> +# CONFIG_USB_GADGET is not set
> +
> +#
> +# OTG and related infrastructure
> +#
> +# CONFIG_USB_GPIO_VBUS is not set
> +# CONFIG_USB_ULPI is not set
> +# CONFIG_NOP_USB_XCEIV is not set
> +# CONFIG_UWB is not set
> +CONFIG_MMC=y
> +# CONFIG_MMC_DEBUG is not set
> +# CONFIG_MMC_UNSAFE_RESUME is not set
> +
> +#
> +# MMC/SD/SDIO Card Drivers
> +#
> +CONFIG_MMC_BLOCK=y
> +CONFIG_MMC_BLOCK_BOUNCE=y
> +# CONFIG_SDIO_UART is not set
> +# CONFIG_MMC_TEST is not set
> +
> +#
> +# MMC/SD/SDIO Host Controller Drivers
> +#
> +# CONFIG_MMC_SDHCI is not set
> +# CONFIG_MMC_TIFM_SD is not set
> +CONFIG_MMC_MVSDIO=y
> +# CONFIG_MMC_CB710 is not set
> +# CONFIG_MMC_VIA_SDMMC is not set
> +# CONFIG_MEMSTICK is not set
> +CONFIG_NEW_LEDS=y
> +CONFIG_LEDS_CLASS=y
> +
> +#
> +# LED drivers
> +#
> +# CONFIG_LEDS_PCA9532 is not set
> +CONFIG_LEDS_GPIO=y
> +CONFIG_LEDS_GPIO_PLATFORM=y
> +# CONFIG_LEDS_LP3944 is not set
> +# CONFIG_LEDS_PCA955X is not set
> +# CONFIG_LEDS_BD2802 is not set
> +# CONFIG_LEDS_LT3593 is not set
> +CONFIG_LEDS_TRIGGERS=y
> +
> +#
> +# LED Triggers
> +#
> +CONFIG_LEDS_TRIGGER_TIMER=y
> +CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> +# CONFIG_LEDS_TRIGGER_GPIO is not set
> +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
> +
> +#
> +# iptables trigger is under Netfilter config (LED target)
> +#
> +# CONFIG_ACCESSIBILITY is not set
> +# CONFIG_INFINIBAND is not set
> +CONFIG_RTC_LIB=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_HCTOSYS=y
> +CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> +# CONFIG_RTC_DEBUG is not set
> +
> +#
> +# RTC interfaces
> +#
> +CONFIG_RTC_INTF_SYSFS=y
> +CONFIG_RTC_INTF_PROC=y
> +CONFIG_RTC_INTF_DEV=y
> +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> +# CONFIG_RTC_DRV_TEST is not set
> +
> +#
> +# I2C RTC drivers
> +#
> +# CONFIG_RTC_DRV_DS1307 is not set
> +# CONFIG_RTC_DRV_DS1374 is not set
> +# CONFIG_RTC_DRV_DS1672 is not set
> +# CONFIG_RTC_DRV_DS3232 is not set
> +# CONFIG_RTC_DRV_MAX6900 is not set
> +# CONFIG_RTC_DRV_RS5C372 is not set
> +# CONFIG_RTC_DRV_ISL1208 is not set
> +# CONFIG_RTC_DRV_ISL12022 is not set
> +# CONFIG_RTC_DRV_X1205 is not set
> +# CONFIG_RTC_DRV_PCF8563 is not set
> +# CONFIG_RTC_DRV_PCF8583 is not set
> +# CONFIG_RTC_DRV_M41T80 is not set
> +# CONFIG_RTC_DRV_BQ32K is not set
> +# CONFIG_RTC_DRV_S35390A is not set
> +# CONFIG_RTC_DRV_FM3130 is not set
> +# CONFIG_RTC_DRV_RX8581 is not set
> +# CONFIG_RTC_DRV_RX8025 is not set
> +
> +#
> +# SPI RTC drivers
> +#
> +
> +#
> +# Platform RTC drivers
> +#
> +# CONFIG_RTC_DRV_CMOS is not set
> +# CONFIG_RTC_DRV_DS1286 is not set
> +# CONFIG_RTC_DRV_DS1511 is not set
> +# CONFIG_RTC_DRV_DS1553 is not set
> +# CONFIG_RTC_DRV_DS1742 is not set
> +# CONFIG_RTC_DRV_STK17TA8 is not set
> +# CONFIG_RTC_DRV_M48T86 is not set
> +# CONFIG_RTC_DRV_M48T35 is not set
> +# CONFIG_RTC_DRV_M48T59 is not set
> +# CONFIG_RTC_DRV_MSM6242 is not set
> +# CONFIG_RTC_DRV_BQ4802 is not set
> +# CONFIG_RTC_DRV_RP5C01 is not set
> +# CONFIG_RTC_DRV_V3020 is not set
> +
> +#
> +# on-CPU RTC drivers
> +#
> +CONFIG_RTC_DRV_MV=y
> +CONFIG_DMADEVICES=y
> +# CONFIG_DMADEVICES_DEBUG is not set
> +
> +#
> +# DMA Devices
> +#
> +CONFIG_MV_XOR=y
> +# CONFIG_TIMB_DMA is not set
> +CONFIG_DMA_ENGINE=y
> +
> +#
> +# DMA Clients
> +#
> +# CONFIG_NET_DMA is not set
> +# CONFIG_ASYNC_TX_DMA is not set
> +# CONFIG_DMATEST is not set
> +# CONFIG_AUXDISPLAY is not set
> +# CONFIG_UIO is not set
> +# CONFIG_STAGING is not set
> +
> +#
> +# File systems
> +#
> +CONFIG_EXT2_FS=y
> +# CONFIG_EXT2_FS_XATTR is not set
> +# CONFIG_EXT2_FS_XIP is not set
> +CONFIG_EXT3_FS=y
> +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> +# CONFIG_EXT3_FS_XATTR is not set
> +# CONFIG_EXT4_FS is not set
> +CONFIG_JBD=y
> +# CONFIG_REISERFS_FS is not set
> +# CONFIG_JFS_FS is not set
> +CONFIG_FS_POSIX_ACL=y
> +# CONFIG_XFS_FS is not set
> +# CONFIG_GFS2_FS is not set
> +# CONFIG_OCFS2_FS is not set
> +# CONFIG_BTRFS_FS is not set
> +# CONFIG_NILFS2_FS is not set
> +CONFIG_FILE_LOCKING=y
> +CONFIG_FSNOTIFY=y
> +CONFIG_DNOTIFY=y
> +CONFIG_INOTIFY_USER=y
> +# CONFIG_QUOTA is not set
> +# CONFIG_AUTOFS_FS is not set
> +# CONFIG_AUTOFS4_FS is not set
> +# CONFIG_FUSE_FS is not set
> +
> +#
> +# Caches
> +#
> +CONFIG_FSCACHE=y
> +# CONFIG_FSCACHE_STATS is not set
> +# CONFIG_FSCACHE_HISTOGRAM is not set
> +# CONFIG_FSCACHE_DEBUG is not set
> +# CONFIG_FSCACHE_OBJECT_LIST is not set
> +# CONFIG_CACHEFILES is not set
> +
> +#
> +# CD-ROM/DVD Filesystems
> +#
> +CONFIG_ISO9660_FS=y
> +CONFIG_JOLIET=y
> +CONFIG_ZISOFS=y
> +CONFIG_UDF_FS=y
> +CONFIG_UDF_NLS=y
> +
> +#
> +# DOS/FAT/NT Filesystems
> +#
> +CONFIG_FAT_FS=y
> +# CONFIG_MSDOS_FS is not set
> +CONFIG_VFAT_FS=y
> +CONFIG_FAT_DEFAULT_CODEPAGE=850
> +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> +# CONFIG_NTFS_FS is not set
> +
> +#
> +# Pseudo filesystems
> +#
> +CONFIG_PROC_FS=y
> +CONFIG_PROC_SYSCTL=y
> +CONFIG_PROC_PAGE_MONITOR=y
> +CONFIG_SYSFS=y
> +CONFIG_TMPFS=y
> +# CONFIG_TMPFS_POSIX_ACL is not set
> +# CONFIG_HUGETLB_PAGE is not set
> +# CONFIG_CONFIGFS_FS is not set
> +CONFIG_MISC_FILESYSTEMS=y
> +# CONFIG_ADFS_FS is not set
> +# CONFIG_AFFS_FS is not set
> +# CONFIG_HFS_FS is not set
> +# CONFIG_HFSPLUS_FS is not set
> +# CONFIG_BEFS_FS is not set
> +# CONFIG_BFS_FS is not set
> +# CONFIG_EFS_FS is not set
> +CONFIG_JFFS2_FS=y
> +CONFIG_JFFS2_FS_DEBUG=0
> +CONFIG_JFFS2_FS_WRITEBUFFER=y
> +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> +CONFIG_JFFS2_SUMMARY=y
> +CONFIG_JFFS2_FS_XATTR=y
> +CONFIG_JFFS2_FS_POSIX_ACL=y
> +CONFIG_JFFS2_FS_SECURITY=y
> +CONFIG_JFFS2_COMPRESSION_OPTIONS=y
> +CONFIG_JFFS2_ZLIB=y
> +CONFIG_JFFS2_LZO=y
> +CONFIG_JFFS2_RTIME=y
> +# CONFIG_JFFS2_RUBIN is not set
> +# CONFIG_JFFS2_CMODE_NONE is not set
> +# CONFIG_JFFS2_CMODE_PRIORITY is not set
> +# CONFIG_JFFS2_CMODE_SIZE is not set
> +CONFIG_JFFS2_CMODE_FAVOURLZO=y
> +# CONFIG_LOGFS is not set
> +# CONFIG_CRAMFS is not set
> +# CONFIG_SQUASHFS is not set
> +# CONFIG_VXFS_FS is not set
> +# CONFIG_MINIX_FS is not set
> +# CONFIG_OMFS_FS is not set
> +# CONFIG_HPFS_FS is not set
> +# CONFIG_QNX4FS_FS is not set
> +# CONFIG_ROMFS_FS is not set
> +# CONFIG_SYSV_FS is not set
> +# CONFIG_UFS_FS is not set
> +CONFIG_NETWORK_FILESYSTEMS=y
> +CONFIG_NFS_FS=y
> +CONFIG_NFS_V3=y
> +# CONFIG_NFS_V3_ACL is not set
> +# CONFIG_NFS_V4 is not set
> +CONFIG_ROOT_NFS=y
> +# CONFIG_NFS_FSCACHE is not set
> +CONFIG_NFSD=y
> +CONFIG_NFSD_V2_ACL=y
> +CONFIG_NFSD_V3=y
> +CONFIG_NFSD_V3_ACL=y
> +# CONFIG_NFSD_V4 is not set
> +CONFIG_LOCKD=y
> +CONFIG_LOCKD_V4=y
> +CONFIG_EXPORTFS=y
> +CONFIG_NFS_ACL_SUPPORT=y
> +CONFIG_NFS_COMMON=y
> +CONFIG_SUNRPC=y
> +# CONFIG_RPCSEC_GSS_KRB5 is not set
> +# CONFIG_RPCSEC_GSS_SPKM3 is not set
> +# CONFIG_SMB_FS is not set
> +# CONFIG_CEPH_FS is not set
> +# CONFIG_CIFS is not set
> +# CONFIG_NCP_FS is not set
> +# CONFIG_CODA_FS is not set
> +# CONFIG_AFS_FS is not set
> +
> +#
> +# Partition Types
> +#
> +# CONFIG_PARTITION_ADVANCED is not set
> +CONFIG_MSDOS_PARTITION=y
> +CONFIG_NLS=y
> +CONFIG_NLS_DEFAULT="iso8859-1"
> +CONFIG_NLS_CODEPAGE_437=y
> +# CONFIG_NLS_CODEPAGE_737 is not set
> +# CONFIG_NLS_CODEPAGE_775 is not set
> +CONFIG_NLS_CODEPAGE_850=y
> +# CONFIG_NLS_CODEPAGE_852 is not set
> +# CONFIG_NLS_CODEPAGE_855 is not set
> +# CONFIG_NLS_CODEPAGE_857 is not set
> +# CONFIG_NLS_CODEPAGE_860 is not set
> +# CONFIG_NLS_CODEPAGE_861 is not set
> +# CONFIG_NLS_CODEPAGE_862 is not set
> +# CONFIG_NLS_CODEPAGE_863 is not set
> +# CONFIG_NLS_CODEPAGE_864 is not set
> +# CONFIG_NLS_CODEPAGE_865 is not set
> +# CONFIG_NLS_CODEPAGE_866 is not set
> +# CONFIG_NLS_CODEPAGE_869 is not set
> +# CONFIG_NLS_CODEPAGE_936 is not set
> +# CONFIG_NLS_CODEPAGE_950 is not set
> +# CONFIG_NLS_CODEPAGE_932 is not set
> +# CONFIG_NLS_CODEPAGE_949 is not set
> +# CONFIG_NLS_CODEPAGE_874 is not set
> +# CONFIG_NLS_ISO8859_8 is not set
> +# CONFIG_NLS_CODEPAGE_1250 is not set
> +# CONFIG_NLS_CODEPAGE_1251 is not set
> +# CONFIG_NLS_ASCII is not set
> +CONFIG_NLS_ISO8859_1=y
> +# CONFIG_NLS_ISO8859_2 is not set
> +# CONFIG_NLS_ISO8859_3 is not set
> +# CONFIG_NLS_ISO8859_4 is not set
> +# CONFIG_NLS_ISO8859_5 is not set
> +# CONFIG_NLS_ISO8859_6 is not set
> +# CONFIG_NLS_ISO8859_7 is not set
> +# CONFIG_NLS_ISO8859_9 is not set
> +# CONFIG_NLS_ISO8859_13 is not set
> +# CONFIG_NLS_ISO8859_14 is not set
> +# CONFIG_NLS_ISO8859_15 is not set
> +# CONFIG_NLS_KOI8_R is not set
> +# CONFIG_NLS_KOI8_U is not set
> +# CONFIG_NLS_UTF8 is not set
> +# CONFIG_DLM is not set
> +
> +#
> +# Kernel hacking
> +#
> +CONFIG_PRINTK_TIME=y
> +# CONFIG_ENABLE_WARN_DEPRECATED is not set
> +# CONFIG_ENABLE_MUST_CHECK is not set
> +CONFIG_FRAME_WARN=1024
> +CONFIG_MAGIC_SYSRQ=y
> +# CONFIG_STRIP_ASM_SYMS is not set
> +# CONFIG_UNUSED_SYMBOLS is not set
> +# CONFIG_DEBUG_FS is not set
> +# CONFIG_HEADERS_CHECK is not set
> +# CONFIG_DEBUG_KERNEL is not set
> +# CONFIG_HARDLOCKUP_DETECTOR is not set
> +# CONFIG_SLUB_DEBUG_ON is not set
> +# CONFIG_SLUB_STATS is not set
> +CONFIG_DEBUG_BUGVERBOSE=y
> +CONFIG_DEBUG_MEMORY_INIT=y
> +CONFIG_FRAME_POINTER=y
> +# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> +# CONFIG_SYSCTL_SYSCALL_CHECK is not set
> +CONFIG_HAVE_FUNCTION_TRACER=y
> +CONFIG_TRACING_SUPPORT=y
> +# CONFIG_FTRACE is not set
> +# CONFIG_ATOMIC64_SELFTEST is not set
> +# CONFIG_SAMPLES is not set
> +CONFIG_HAVE_ARCH_KGDB=y
> +# CONFIG_ARM_UNWIND is not set
> +# CONFIG_DEBUG_USER is not set
> +# CONFIG_OC_ETM is not set
> +
> +#
> +# Security options
> +#
> +# CONFIG_KEYS is not set
> +# CONFIG_SECURITY is not set
> +# CONFIG_SECURITYFS is not set
> +CONFIG_DEFAULT_SECURITY_DAC=y
> +CONFIG_DEFAULT_SECURITY=""
> +CONFIG_CRYPTO=y
> +
> +#
> +# Crypto core or helper
> +#
> +CONFIG_CRYPTO_ALGAPI=y
> +CONFIG_CRYPTO_ALGAPI2=y
> +CONFIG_CRYPTO_AEAD2=y
> +CONFIG_CRYPTO_BLKCIPHER=y
> +CONFIG_CRYPTO_BLKCIPHER2=y
> +CONFIG_CRYPTO_HASH=y
> +CONFIG_CRYPTO_HASH2=y
> +CONFIG_CRYPTO_RNG2=y
> +CONFIG_CRYPTO_PCOMP2=y
> +CONFIG_CRYPTO_MANAGER=y
> +CONFIG_CRYPTO_MANAGER2=y
> +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> +# CONFIG_CRYPTO_GF128MUL is not set
> +# CONFIG_CRYPTO_NULL is not set
> +CONFIG_CRYPTO_WORKQUEUE=y
> +# CONFIG_CRYPTO_CRYPTD is not set
> +# CONFIG_CRYPTO_AUTHENC is not set
> +CONFIG_CRYPTO_TEST=m
> +
> +#
> +# Authenticated Encryption with Associated Data
> +#
> +# CONFIG_CRYPTO_CCM is not set
> +# CONFIG_CRYPTO_GCM is not set
> +# CONFIG_CRYPTO_SEQIV is not set
> +
> +#
> +# Block modes
> +#
> +CONFIG_CRYPTO_CBC=y
> +# CONFIG_CRYPTO_CTR is not set
> +# CONFIG_CRYPTO_CTS is not set
> +CONFIG_CRYPTO_ECB=y
> +# CONFIG_CRYPTO_LRW is not set
> +# CONFIG_CRYPTO_PCBC is not set
> +# CONFIG_CRYPTO_XTS is not set
> +
> +#
> +# Hash modes
> +#
> +CONFIG_CRYPTO_HMAC=y
> +# CONFIG_CRYPTO_XCBC is not set
> +# CONFIG_CRYPTO_VMAC is not set
> +
> +#
> +# Digest
> +#
> +# CONFIG_CRYPTO_CRC32C is not set
> +# CONFIG_CRYPTO_GHASH is not set
> +# CONFIG_CRYPTO_MD4 is not set
> +# CONFIG_CRYPTO_MD5 is not set
> +# CONFIG_CRYPTO_MICHAEL_MIC is not set
> +# CONFIG_CRYPTO_RMD128 is not set
> +# CONFIG_CRYPTO_RMD160 is not set
> +# CONFIG_CRYPTO_RMD256 is not set
> +# CONFIG_CRYPTO_RMD320 is not set
> +CONFIG_CRYPTO_SHA1=y
> +# CONFIG_CRYPTO_SHA256 is not set
> +# CONFIG_CRYPTO_SHA512 is not set
> +# CONFIG_CRYPTO_TGR192 is not set
> +# CONFIG_CRYPTO_WP512 is not set
> +
> +#
> +# Ciphers
> +#
> +CONFIG_CRYPTO_AES=y
> +# CONFIG_CRYPTO_ANUBIS is not set
> +# CONFIG_CRYPTO_ARC4 is not set
> +# CONFIG_CRYPTO_BLOWFISH is not set
> +# CONFIG_CRYPTO_CAMELLIA is not set
> +# CONFIG_CRYPTO_CAST5 is not set
> +# CONFIG_CRYPTO_CAST6 is not set
> +# CONFIG_CRYPTO_DES is not set
> +# CONFIG_CRYPTO_FCRYPT is not set
> +# CONFIG_CRYPTO_KHAZAD is not set
> +# CONFIG_CRYPTO_SALSA20 is not set
> +# CONFIG_CRYPTO_SEED is not set
> +# CONFIG_CRYPTO_SERPENT is not set
> +# CONFIG_CRYPTO_TEA is not set
> +# CONFIG_CRYPTO_TWOFISH is not set
> +
> +#
> +# Compression
> +#
> +# CONFIG_CRYPTO_DEFLATE is not set
> +# CONFIG_CRYPTO_ZLIB is not set
> +# CONFIG_CRYPTO_LZO is not set
> +
> +#
> +# Random Number Generation
> +#
> +# CONFIG_CRYPTO_ANSI_CPRNG is not set
> +CONFIG_CRYPTO_HW=y
> +CONFIG_CRYPTO_DEV_MV_CESA=y
> +# CONFIG_CRYPTO_DEV_HIFN_795X is not set
> +# CONFIG_BINARY_PRINTF is not set
> +
> +#
> +# Library routines
> +#
> +CONFIG_BITREVERSE=y
> +CONFIG_GENERIC_FIND_LAST_BIT=y
> +# CONFIG_CRC_CCITT is not set
> +# CONFIG_CRC16 is not set
> +# CONFIG_CRC_T10DIF is not set
> +CONFIG_CRC_ITU_T=y
> +CONFIG_CRC32=y
> +# CONFIG_CRC7 is not set
> +# CONFIG_LIBCRC32C is not set
> +CONFIG_ZLIB_INFLATE=y
> +CONFIG_ZLIB_DEFLATE=y
> +CONFIG_LZO_COMPRESS=y
> +CONFIG_LZO_DECOMPRESS=y
> +CONFIG_HAS_IOMEM=y
> +CONFIG_HAS_IOPORT=y
> +CONFIG_HAS_DMA=y
> +CONFIG_NLATTR=y
> +CONFIG_GENERIC_ATOMIC64=y
> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> index cc25501..324b004 100644
> --- a/arch/arm/mach-kirkwood/Kconfig
> +++ b/arch/arm/mach-kirkwood/Kconfig
> @@ -88,6 +88,12 @@ config MACH_NETSPACE_V2
> Say 'Y' here if you want your kernel to support the
> LaCie Network Space v2 NAS.
>
> +config MACH_TK71
> + bool "TK71 88F6281 based Q7 form factor board"
> + help
> + Say 'Y' here if you want your kernel to support the
> + TK71 88F6281 based Q7 form factor board.
> +
> config MACH_INETSPACE_V2
> bool "LaCie Internet Space v2 NAS Board"
> help
> diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
> index 295d7ba..f3a3c55 100644
> --- a/arch/arm/mach-kirkwood/Makefile
> +++ b/arch/arm/mach-kirkwood/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
> obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
> obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
> obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
> +obj-$(CONFIG_MACH_TK71) += tk71-setup.o
> obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
> obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
> obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o
> diff --git a/arch/arm/mach-kirkwood/tk71-setup.c b/arch/arm/mach-kirkwood/tk71-setup.c
> new file mode 100644
> index 0000000..57e3470
> --- /dev/null
> +++ b/arch/arm/mach-kirkwood/tk71-setup.c
> @@ -0,0 +1,153 @@
> +/*
> + * arch/arm/mach-kirkwood/tk71-setup.c
> + * based on
> + * arch/arm/mach-kirkwood/rd88f6281-setup.c
> + *
> + * TK71 Kirkwood based Q7 formfactor board
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/ata_platform.h>
> +#include <linux/mv643xx_eth.h>
> +#include <linux/gpio.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <mach/kirkwood.h>
> +#include <plat/mvsdio.h>
> +#include <plat/orion_nand.h>
> +#include "common.h"
> +#include "mpp.h"
> +
> +static struct mtd_partition tk71_nand_parts[] = {
> + {
> + .name = "u-boot",
> + .offset = 0,
> + .size = 0x80000
> + }, {
> + .name = "u-boot-env",
> + .offset = MTDPART_OFS_NXTBLK,
> + .size = 0x80000
> + }, {
> + .name = "kernel",
> + .offset = MTDPART_OFS_NXTBLK,
> + .size = 0x300000
> + }, {
> + .name = "root",
> + .offset = MTDPART_OFS_NXTBLK,
> + .size = MTDPART_SIZ_FULL
> + },
> +};
> +
> +static struct mv643xx_eth_platform_data tk71_ge00_data = {
> + .phy_addr = MV643XX_ETH_PHY_ADDR(8),
> + /* in case a hardcoded MAC address is needed uncomment next line */
> + /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2b}, */
> +};
> +
> +static struct mv643xx_eth_platform_data tk71_ge01_data = {
> + .phy_addr = MV643XX_ETH_PHY_ADDR(/*24*/ 28),
> + /* in case a hardcoded MAC address is needed uncomment next line */
> + /* .mac_addr = {0x00, 0x0c, 0xc6, 0x76, 0x76, 0x2c}, */
> +};
> +
> +static struct mv_sata_platform_data tk71_sata_data = {
> + .n_ports = 2,
> +};
> +
> +static struct mvsdio_platform_data tk71_mvsdio_data = {
> + .gpio_card_detect = 29,
> +};
> +
> +static unsigned int tk71_mpp_config[] __initdata = {
> +#if 0
> + MPP0_SPI_SCn, /* SPI - currently unused */
> + MPP1_SPI_MOSI,
> + MPP2_SPI_SCK,
> + MPP3_SPI_MISO,
> +#endif
> + MPP7_PEX_RST_OUTn, /* PCIe #reset */
> + MPP8_TW0_SDA, /* I2C */
> + MPP9_TW0_SCK, /* I2C */
> + MPP20_GE1_TXD0, /* second GigE */
> + MPP21_GE1_TXD1,
> + MPP22_GE1_TXD2,
> + MPP23_GE1_TXD3,
> + MPP24_GE1_RXD0,
> + MPP25_GE1_RXD1,
> + MPP26_GE1_RXD2,
> + MPP27_GE1_RXD3,
> + MPP28_GPIO, /* PHY2 RESET */
> + MPP29_GPIO, /* SDIO_CD# */
> + MPP30_GE1_RXCTL,
> + MPP31_GE1_RXCLK,
> + MPP32_GE1_TCLKOUT,
> + MPP33_GE1_TXCTL,
> + MPP34_GPIO, /* SDIO_PWR# */
> + 0
> +};
> +
> +static void __init tk71_init(void)
> +{
> + /*
> + * Basic setup. Needs to be called early.
> + */
> + kirkwood_init();
> +
> + kirkwood_mpp_conf(tk71_mpp_config);
> +
> + kirkwood_uart0_init();
> +
> + kirkwood_nand_init(ARRAY_AND_SIZE(tk71_nand_parts), 25);
> +
> + /* kirkwood_spi_init(); */ /* if you want to use SPI, uncomment this and MPP setup above*/
> +
> + kirkwood_i2c_init();
> +
> + /* eth0 */
> + kirkwood_ge00_init(&tk71_ge00_data);
> +
> + /* eth1 */
> + if (gpio_request(28, "PHY2 reset") != 0 ||
> + gpio_direction_input(28) != 0) // high-z
I don't know if it's usually in mach-kirkwood to write it this way, but
I think it can be done in a more readable way.
> + printk(KERN_ERR "can't deassert GPIO 28 (PHY2 reset)\n");
pr_err maybe?
> + else
> + kirkwood_ge01_init(&tk71_ge01_data);
> +
> + kirkwood_sata_init(&tk71_sata_data);
> +
> + kirkwood_ehci_init();
> +
> + if (gpio_request(34, "SDIO Power Enable") != 0 ||
> + gpio_direction_output(34, 0) != 0) /* low active */
> + printk(KERN_ERR "can't set up GPIO 34 (SDIO Power Enable)\n");
> + kirkwood_sdio_init(&tk71_mvsdio_data);
> +}
> +
> +static int __init tk71_pci_init(void)
> +{
> + if (machine_is_tk71())
> + kirkwood_pcie_init(KW_PCIE0);
> +
> + return 0;
> +}
> +subsys_initcall(tk71_pci_init);
> +
> +MACHINE_START(TK71, "TK71 Kirkwood based Q7 formfactor board")
> + /* Maintainer: Nils Faerber <nils.faerber@kernelconcepts.de> */
> + .phys_io = KIRKWOOD_REGS_PHYS_BASE,
> + .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
These fields don't exist anymore.
> + .boot_params = 0x00000100,
> + .init_machine = tk71_init,
> + .map_io = kirkwood_map_io,
> + .init_irq = kirkwood_init_irq,
> + .timer = &kirkwood_timer,
> +MACHINE_END
> --
> 1.7.0.4
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | http://www.pengutronix.de/ |
^ permalink raw reply [flat|nested] 7+ messages in thread