[PATCH 4/7] i2c/pxa2xx: add support for shared IRQ handler

[bigeasy@linutronix.de (Sebastian Andrzej Siewior)]

Haojian Zhuang wrote:
>> diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
>> index dc66fde..7647361 100644
>> --- a/drivers/i2c/busses/i2c-pxa.c
>> +++ b/drivers/i2c/busses/i2c-pxa.c
>> @@ -905,11 +905,17 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
>>        writel(icr, _ICR(i2c));
>>  }
>>
>> +#define VALID_INT_SOURCE       (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
>> +                               ISR_SAD | ISR_BED)
>>  static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
>>  {
>>        struct pxa_i2c *i2c = dev_id;
>>        u32 isr = readl(_ISR(i2c));
>>
>> +       isr &= VALID_INT_SOURCE;
>> +       if (!isr)
>> +               return IRQ_NONE;
>> +
> 
> If you return at here, the valid interrupt status event won't be
> cleared in IRQ handler. So I2C interrupt handler will be triggered at
> next time.

The point here is that I have a shared handler and I have to know if my
i2c device issued an interrupt or another device. If I return here then it
was not my i2c device bot some other device hanging on the same interrupt
line.
I can't simply test for !isr (without VALID_INT_SOURCE) because some bits
in this register have nothing todo with the interrupt status as it.

Sebastian