[PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI

[nicolas.ferre@atmel.com (Nicolas Ferre)]

Le 25/11/2010 11:11, Yauhen Kharuzhy :
> The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte
> transfers, but at91_mci driver doesn't use them and handles all SDIO
> transfers as ordinary MMC block transfers. This causes problems for
> multiple-block SDIO transfers (in particular for 256-bytes blocks).
> 
> Fix this situation by check opcode for SDIO CMD53 and set transfer
> type in AT91_MCI_CMDR register properly.
> 
> This patch was tested with libertas SDIO driver: problem with TX
> timeouts on big packets was eliminated.
> 
> Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
>  arch/arm/mach-at91/include/mach/at91_mci.h |    2 ++
>  drivers/mmc/host/at91_mci.c                |   13 +++++++++----
>  2 files changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
> index 57f8ee1..27ac6f5 100644
> --- a/arch/arm/mach-at91/include/mach/at91_mci.h
> +++ b/arch/arm/mach-at91/include/mach/at91_mci.h
> @@ -74,6 +74,8 @@
>  #define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
>  #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
>  #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
> +#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
> +#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)
>  
>  #define AT91_MCI_BLKR		0x18		/* Block Register */
>  #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
> diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
> index 591ab54..d3e6a96 100644
> --- a/drivers/mmc/host/at91_mci.c
> +++ b/drivers/mmc/host/at91_mci.c
> @@ -69,6 +69,7 @@
>  #include <linux/highmem.h>
>  
>  #include <linux/mmc/host.h>
> +#include <linux/mmc/sdio.h>
>  
>  #include <asm/io.h>
>  #include <asm/irq.h>
> @@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
>  		else if (data->flags & MMC_DATA_WRITE)
>  			cmdr |= AT91_MCI_TRCMD_START;
>  
> -		if (data->flags & MMC_DATA_STREAM)
> -			cmdr |= AT91_MCI_TRTYP_STREAM;
> -		if (data->blocks > 1)
> -			cmdr |= AT91_MCI_TRTYP_MULTIPLE;
> +		if (cmd->opcode == SD_IO_RW_EXTENDED) {
> +			cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
> +		} else {
> +			if (data->flags & MMC_DATA_STREAM)
> +				cmdr |= AT91_MCI_TRTYP_STREAM;
> +			if (data->blocks > 1)
> +				cmdr |= AT91_MCI_TRTYP_MULTIPLE;
> +		}
>  	}
>  	else {
>  		block_length = 0;


-- 
Nicolas Ferre