[PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks

[lars@metafoo.de (Lars-Peter Clausen)]

On 11/30/2010 01:01 PM, Vasily Khoruzhick wrote:
> On Tuesday 30 November 2010 13:53:43 Lars-Peter Clausen wrote:
> 
>>> Hmm...how about s3c_gpio_setpull_1updown(...)?
>>> And actually, not used 3rd argument, "pull" now.
>>> I prefer follwoing.
>>
>> You need the 4th arguemnt, because the s3c2440 only supports pullups and
>> the s3c2442 only supports pulldowns. So you want to return -EINVAL if
>> somebody tries to set a pullup on a s3c2442 based board.
>> Your proposed solution would return 0 and set a pulldown instead.
> 
> Well, at least it allows single-binary kernel for s3c24xx to exist. I think 
> it's OK, as setting pull{up,down} bit for any non S3C_GPIO_PULL_NONE arg 
> preserves semantics for all SoCs (s3c2410/s3c2440/s3c2442) by cost of not 
> handling errors. Anyway, who wants to call cfgpull with S3C_GPIO_PULL_DOWN on 
> s3c2410/s3c2440 or with S3C_GPIO_PULL_UP on s3c2442?
>  
> Regards
> Vasily

Hi

While this might work for setting the pullup, what to you want to return in get_pull?

The reason why s3c24xx_gpiocfg_default needs to have {get,set}_pull set at compile
time is that the board init code is called before the cpu init code. Which is in my
opinion a bit odd and should be fixed instead.
If it is not fixed for whatever reason we could fallback to using some sort of
"cpu_is_s3c2442() ? S3C_GPIO_PULL_UP : S3C_GPIO_PULL_DOWN"

- Lars