From mboxrd@z Thu Jan 1 00:00:00 1970 From: sshtylyov@mvista.com (Sergei Shtylyov) Date: Fri, 24 Dec 2010 14:25:41 +0300 Subject: [PATCH v2] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs In-Reply-To: <1293132288-22325-1-git-send-email-michael.williamson@criticallink.com> References: <1293132288-22325-1-git-send-email-michael.williamson@criticallink.com> Message-ID: <4D148335.8070209@mvista.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello. On 23-12-2010 22:24, Michael Williamson wrote: > From: Sudhakar Rajashekhara > The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. > In addition, the variant code for the AM-1808 SoC appears to match > the Rev-2.0 code for the OMAP-L138. Add an additional entry to support > these chips. > This patch is orignally from a patch on the arago project, here: > http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7 > Further information related to the need for this patch can be located at > http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx > http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html > This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It > was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card. > Signed-off-by: Michael Williamson > Tested-by: Michael Williamson > Reported-by: Nicolas Luna I saw that the original patch was signed off by Sudhakar -- why you omitted that? WBR, Sergei