From mboxrd@z Thu Jan 1 00:00:00 1970 From: michael.williamson@criticallink.com (Michael Williamson) Date: Mon, 27 Dec 2010 06:45:24 -0500 Subject: [PATCH v3] davinci: Add additional JTAG code for AM-1808 and OMAP-L138 Rev 2.0 SoCs In-Reply-To: References: <1293393416-12850-1-git-send-email-michael.williamson@criticallink.com> Message-ID: <4D187C54.205@criticallink.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 12/27/2010 01:03 AM, Nori, Sekhar wrote: > On Mon, Dec 27, 2010 at 01:26:56, Michael Williamson wrote: >> From: Sudhakar Rajashekhara >> >> The JTAG variant code for Rev-2.0 silicon of the OMAP-L138 has changed. >> In addition, the variant code for the AM-1808 SoC appears to match >> the Rev-2.0 code for the OMAP-L138. Add an additional entry to support >> these chips. >> >> This patch is originally from a patch on the arago project, here: >> http://arago-project.org/git/projects/?p=linux-omapl1.git;a=commit;h=6157618435e313a444cdf059702bd34036a6e2b7 >> >> Further information related to the need for this patch can be located at >> http://e2e.ti.com/support/embedded/f/354/p/67290/248486.aspx >> http://linux.davincidsp.com/pipermail/davinci-linux-open-source/2010-November/021224.html >> >> This patch was tested using an AM-1808 SoC on a MityARM-1808 SoM card. It >> was also tested using a Rev 1.0 silicon OMAP-L138 on a MityDSP-L138F card. >> >> Signed-off-by: Sudhakar Rajashekhara >> Signed-off-by: Michael Williamson >> Tested-by: Michael Williamson >> Reported-by: Nicolas Luna >> --- >> This is against davinci-linux tree. >> Changes since v2: >> - Added Sudhakar's sign-off. >> - Fix spelling error in description. >> >> arch/arm/mach-davinci/da850.c | 7 +++++++ >> 1 files changed, 7 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c >> index 78b5ae2..2d0bba5 100644 >> --- a/arch/arm/mach-davinci/da850.c >> +++ b/arch/arm/mach-davinci/da850.c >> @@ -764,6 +764,13 @@ static struct davinci_id da850_ids[] = { >> .cpu_id = DAVINCI_CPU_ID_DA850, >> .name = "da850/omap-l138", > > Should have "/am18x" here. That should have been part > of my patches adding AM1x support. It should now be a > separate patch. > I will add this. >> }, >> + { >> + .variant = 0x1, >> + .part_no = 0xb7d1, >> + .manufacturer = 0x017, /* 0x02f >> 1 */ >> + .cpu_id = DAVINCI_CPU_ID_DA850, >> + .name = "da850/omap-l138/am18xx", > > Just "am18x". > I will correct and resubmit. Thanks. -Mike