From mboxrd@z Thu Jan 1 00:00:00 1970 From: gerg@snapgear.com (Greg Ungerer) Date: Tue, 11 Jan 2011 23:25:41 +1000 Subject: [PATCH v4 05/10] net/fec: add dual fec support for mx28 In-Reply-To: <20110111130749.GQ24920@pengutronix.de> References: <1294297998-26930-1-git-send-email-shawn.guo@freescale.com> <1294297998-26930-6-git-send-email-shawn.guo@freescale.com> <20110111102717.GG26617@pengutronix.de> <4D2C4BEC.1030003@snapgear.com> <20110111130749.GQ24920@pengutronix.de> Message-ID: <4D2C5A55.7050502@snapgear.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Uwe, On 11/01/11 23:07, Uwe Kleine-K?nig wrote: > Hi Greg, > > On Tue, Jan 11, 2011 at 10:24:12PM +1000, Greg Ungerer wrote: >> On 11/01/11 20:27, Sascha Hauer wrote: >>> On Thu, Jan 06, 2011 at 03:13:13PM +0800, Shawn Guo wrote: >>> This option is used nowhere and should be removed. Certainly it does not >>> have the effect of enabling the second ethernet controller. >> >> It does for a ColdFire platform... >> >> grep -r CONFIG_FEC2 * >> >> arch/m68knommu/configs/m5275evb_defconfig:CONFIG_FEC2=y >> arch/m68knommu/platform/527x/config.c:#ifdef CONFIG_FEC2 >> arch/m68knommu/platform/527x/config.c:#ifdef CONFIG_FEC2 > IMHO Sascha's comment[1] applies here, too. I am not arguing that it doesn't :-) Simply that removing that config option and doing nothing else would not be the right thing to do. Regards Greg > And someone might want to do what he suggested soon or the patch > removing CONFIG_FEC2[2] needs to be commented accordingly. > > Best regards > Uwe > > [1] http://thread.gmane.org/gmane.linux.network/182929/focus=183378 > [2] http://mid.gmane.org/1294747672-4433-1-git-send-email-shawn.guo at freescale.com > -- ------------------------------------------------------------------------ Greg Ungerer -- Principal Engineer EMAIL: gerg at snapgear.com SnapGear Group, McAfee PHONE: +61 7 3435 2888 8 Gardner Close, FAX: +61 7 3891 3630 Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com