linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lars@metafoo.de (Lars-Peter Clausen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pxa3xx: fix PXA GPIO IRQ handling
Date: Tue, 18 Jan 2011 12:47:12 +0100	[thread overview]
Message-ID: <4D357DC0.2030006@metafoo.de> (raw)
In-Reply-To: <1295338738-4129-1-git-send-email-s.neumann@raumfeld.com>

On 01/18/2011 09:18 AM, Sven Neumann wrote:
> From: Lars-Peter Clausen <lars@metafoo.de>
> 
> Set the "set_wake" field of the irq_chip struct before calling
> set_irq_chip() for all of the IRQs, so that the compat handler
> actually gets installed.
> 
> Tested-by: Sven Neumann <s.neumann@raumfeld.com>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

> ---
>  arch/arm/mach-pxa/irq.c    |    7 ++++---
>  arch/arm/mach-pxa/pxa3xx.c |    4 ++--
>  2 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
> index 1beb40f..a5b42a7 100644
> --- a/arch/arm/mach-pxa/irq.c
> +++ b/arch/arm/mach-pxa/irq.c
> @@ -111,13 +111,13 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
>  	GRER0 &= ~0x3;
>  	GEDR0 = 0x3;
>  
> +	pxa_low_gpio_chip.set_wake = fn;
> +
>  	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
>  		set_irq_chip(irq, &pxa_low_gpio_chip);
>  		set_irq_handler(irq, handle_edge_irq);
>  		set_irq_flags(irq, IRQF_VALID);
>  	}
> -
> -	pxa_low_gpio_chip.set_wake = fn;
>  }
>  
>  void __init pxa_init_irq(int irq_nr, set_wake_t fn)
> @@ -142,13 +142,14 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
>  	/* only unmasked interrupts kick us out of idle */
>  	ICCR = 1;
>  
> +	pxa_internal_irq_chip.set_wake = fn;
> +
>  	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
>  		set_irq_chip(irq, &pxa_internal_irq_chip);
>  		set_irq_handler(irq, handle_level_irq);
>  		set_irq_flags(irq, IRQF_VALID);
>  	}
>  
> -	pxa_internal_irq_chip.set_wake = fn;
>  	pxa_init_low_gpio_irq(fn);
>  }
>  
> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
> index 276e8fb..5a8fe5c 100644
> --- a/arch/arm/mach-pxa/pxa3xx.c
> +++ b/arch/arm/mach-pxa/pxa3xx.c
> @@ -567,13 +567,13 @@ static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
>  {
>  	int irq;
>  
> +	pxa_ext_wakeup_chip.set_wake = fn;
> +
>  	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
>  		set_irq_chip(irq, &pxa_ext_wakeup_chip);
>  		set_irq_handler(irq, handle_edge_irq);
>  		set_irq_flags(irq, IRQF_VALID);
>  	}
> -
> -	pxa_ext_wakeup_chip.set_wake = fn;
>  }
>  
>  void __init pxa3xx_init_irq(void)

  parent reply	other threads:[~2011-01-18 11:47 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-13 15:44 resume regression in 2.6.37 Sven Neumann
2011-01-13 16:28 ` Thomas Gleixner
2011-01-13 17:16   ` Sven Neumann
2011-01-13 17:33     ` Thomas Gleixner
2011-01-17 10:36       ` Sven Neumann
2011-01-17 12:40         ` Thomas Gleixner
2011-01-17 14:04           ` Sven Neumann
2011-01-17 18:41             ` Thomas Gleixner
2011-01-17 19:24           ` Lars-Peter Clausen
2011-01-17 19:59             ` Lars-Peter Clausen
2011-01-18  8:16               ` Sven Neumann
2011-01-18  8:18                 ` [PATCH] pxa3xx: fix PXA GPIO IRQ handling Sven Neumann
2011-01-18 11:06                   ` Uwe Kleine-König
2011-01-18 11:47                   ` Lars-Peter Clausen [this message]
2011-01-18 12:29                     ` [PATCH] ARM: pxa: fix " Sven Neumann
2011-01-18 16:15                     ` [PATCH] pxa3xx: fix PXA " Eric Miao
2011-01-18 16:20                       ` Lennert Buijtenhek
2011-01-18 21:49                       ` Sven Neumann
2011-01-20 18:48                         ` Eric Miao
2011-01-20 18:55                           ` Eric Miao
2011-01-18  8:19             ` resume regression in 2.6.37 Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D357DC0.2030006@metafoo.de \
    --to=lars@metafoo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).